HomeMy WebLinkAboutBLD-19-003868 .. Commonwealth of Massachusetts
,a 1 Department of Public Safety
SY ((
- ' Uniform Fire Protection Construction
Document Transmittal Form
Date: - a,-Iq
To: y f O 1- (AO l\vok
From: 1 ‘.)11c)111.5 bte1•
Re: ('1).3 Rovit 6A 31d 6
Map Parcel
I am forwarding a set of fire protection documents to you for your review pursuant to 780 CMR the
Massachusetts State Building Code, Sections 107.1.2 and/or R106.3.3.4, as applicable. The following
documents are enclosed:
Plans Plans ? $Act Rm., Mkt-, ?hrt1
Plans
Other:
Please review these construction documents for compliance with 780 CMR 9.00 and/or 780 CMR 4.00, 780
CMR 34.00, 780 CMR 51.00 Ch. 3 and Appendix J as applicable. For the purpose of your review,it has been
determined that the proposed construction a is and the roposed use(s) is/are:
A Assembly A-1 ❑,A-2 [I, A-3 0,A-4 1, A-5
B Business B 4 M Mercantile M H
E Educational E J S Storage S-1 [j, S-2 H
F Factory F-1 H, F-2 Li U Utility S H
H High Hazard H-10, H-2 ❑, H-30, 11-4 ❑,11-5 ❑
I Institutional I-1 H, I-2 ❑, I-3 ❑, I-4
R Residential R-1 ❑,R-2 ❑,R-3 ❑,R-4 ❑, land 2 Family Dwelling ❑,Townhouses❑
Special Use S ecial Use ❑, S eci :
Mixed Use Yes 0,No ; Non Separated❑, Separated ❑, Combination Non Sep./Sep. ❑
Please forward your written comments, or a request for an extension of time,to this office within 10 days. If
you believe the fire protection construction documents are noncompliant with the requirements of 780 CMR
or the applicable reference standards,provide your written comments citing the relevant sections of
noncompliance(refer to M.G.L. c.148 §28A). If your written comments or request for an extension of time is
not received within the allowed time frame,the documents,after review,may be deemed to be in compliance
with 780 CMR. Please note,one or more extensions of time for review may be granted,provided that
cumulative time does not exceed 30 days. Should you have any questions,please contact this office.
Please sign,date and return one copy of this document to the building department.
Fire Chief or Designee ('01. (& Print Name &=fit 4 tiOCId-Date 1_i i 19
For Building Department Use;
Received By: f ` Date: L/7 /J011- Permit#:610`IC- 003$615
1
•
w
•
12,4
si
TIL416 r o 51
e i Oltaild,Catailia +m
Dranidned ofreationekt9eS - Office1 ,.e EB ng Come ieeinnei
1146 geuste 28, es-oug 'f a y„ncag, giea,02664
APPLICATION FOR FIRE PROTECTION PERMIT
Date I�v/gqG'/ROI$ PERMIT NUMBER RI,D - 19 at 376F
Projected Start Date: ASAP Date of issue
In accordance with the provisions of 780 CMR and M.G.L. Chapter 148, as provided in
Section n
application is hereby made by Care cod Alar y,,
Address 02011 02-0 `Tr,wnaeousFmeoReoaFirmorCorPoration) 1/
d tN'=sv- Your-mount
3 vC ; gldn 1 J�� �(Contact#) ,518 -R58�(oa2�
Job Locationoun s
(Street&City or Town)
For permission to (state clear y purpose for which permit is
requested) Cope ad �Larcn To 0 (`72.e, Q'Jte DC-sr j h g
e alar to Canto Liana)lcox- Chun ictm c�p C.
Name of competent operator (if applicable) gene Cor lanIer / Cope ad 1l„_ni
Cert, orLicenseNo. 159 ,- C Estimated Cost of Construction: //500. Da
By (.�J 44
(Signature ofApplicant),
PERMIT# FEE: $50.00
1
The Commonwealth of Massachusetts
1 Elir--.fl Department of Industrial Accidents
_EFie_
C-:-1411f_-=§
l,_
§ 1 Congress Street,Suite 100
_(-1_{=r9Boston,MA 02114-2017
s,,��� www.mass.gov/dia
Workers'Compensation Insurance Affidavit:Builders/Contractors/Electricians/Plumbers.
TO BE FILED WITH THE PERMITTING AUTHORITY.
• Applicant Information Please Print Legibly
Name(Business/Organization/Individual):CAPE COD ALARM COMPANY, INC.
Address:204 OLD TOWNHOUSE ROAD
City/State/Zip:WEST YARMOUTH, MA 02673 phone#:508-398-6316
Are you an employer?Check the appropriate box:
"IA Type of project(required):
ICI am a employer with "7 A employees(full and/or part-time).* • 7. 0 New construction
2.0 lam a sole proprietor or partnership and have no employees working for me in 8. El Remodeling
any capacity.[No workers'comp.insurance required.]
301 am a homeowner doing all work myself.[No workers'comp.insurance required.]t 9. ❑Demolition
4.01 am a homeowner and will be hiring contractors to conduct all work on my property. I will 10❑Building addition
ensure that all contractors either have workers'compensation insurance or are sole 11.0 Electrical repairs or additions
proprietors with no employees. 12.❑Plumbing repairs or additions
5.0 I am a general contractor and I have hired the sub-contractors listed on the attached sheet. 13.0 Roof repairs
These sub-contractors have employees and have workers'comp.insurance.: /1 �^s
6.❑We ere a corporation and its officers have exercised their right of exemption per MOL c. 14.0Other Q'L� W Fr�f
152,§1(4),and we have no employees.[No workers'comp.insurance required.] 191,/Ann
^, ,-„n Alt EL
'Any applicant that checks box 01 must also fill out the section below showing their workers'compensation policy information. �(
t Homeowners who submit this affidavit indicating they are doing all work and then hire outside contractors must submit a new affidavit indicating s h
:Contractors that check this box must attached an additional sheet showing the name of the sub-contractors and state whether or not those entities have
employees. If the sub-contractors have employees,they must provide their workers'comp.policy number.
I am an employer that is providing workers'compensation insurance for my employees. Below is the policy and job site
information.
Insurance Company Name:Associated Employers Insurance Company
Policy#or Self-ins.
�Liicc.#:WCC-500-5006433-2018A Expiration Date:September 1,2019
9 3 P Owe (�d)l V[M tid m(p GCity/State/Zip: �/
Job Site Address: . ty p: /a( YYiO((`(d{}�dd�r
Attach a copy of the workers'compensation policy declaration pagShowing the policy number and expiration(date).
Failure to secure coverage as required under MGL c. 152,§25A is a criminal violation punishable by a fine up to$1,500.00
and/or one-year imprisonment,as well as civil penalties in the form of a STOP WORK ORDER and a fine of up to 5250.00 a
day against the violator.A copy of this statement may be forwarded to the Office of Investigations of the DIA for insurance
coverage verification.
7 do hereby certify unddee he pains nd pen les of perjury that the information provided above
is true and correct
Signature: /['„Mt.( ,//enn-nf J1 ( ' Date: I�v/ofR0/0co
phone 0:508:158-2624
Official use only. Do not write in this area,to be completed by city or town official
City or Town: Permit/License#
Issuing Authority(circle one):
1.Board of Health 2.Building Department 3.City/Town Clerk 4.Electrical Inspector 5.Plumbing Inspector
6.Other
Contact Person: Phone#:
•
..-
• Yd:.
--
•
1;.•:!•.
....,
. .....-,.
•
• n Commonwealth of Massachusetts
iSCOMMONWertilh OF MASSACHUSETTSAMI
damt,
Ril DIVISION OF PROFESSIOFNAL LIOE.NSUREttii , i Vi Division ot Professional Licensure
- BOARD i
. '.:t.*?:e• . ..,_
ELECTRICIANS itqt : ',.., ''.. -,..,„. •.0 c,,W.Mu •
Securityaystems45-License
raell'4‘i.f. :
ISSUES THE FOLLOWINd'ucENsE`
SSCO-000248 E , ctxpires: 11/07/2020 1 ..
6YEAED sysTEm I
GEINIO le ,.., . . ‘ , ..
-,..ai .
3ccHriisAN-a,.',<- c .i
, . i3c9! .„,,,...:,, ,,i,. :•:i k.y._____,',. - ., '-i Am 1+4 # "'
9..'‘E).4E.''A CoRmiERI, .5.::,....4•*,.. ...,,,:,.1., ..c); Heoilz
E yLA'd 11.5411,1;-' .= ;'.5 1. '
;A?P'§"fiAARGATE,I,N::0 - - i. NIcils .":,.7. i'll.,'t,
(N....
cAPE GOD AORM,
.. , •
sw* .'cblikikie, vik02650
. 4c67- lc. ,'
,i.'•••SOLITit, . o ..: ...l.! .•:.•,_"iii.-.107.1 .;•.s.
D11,13,4V ''
1507 13, ,t!;;ICC" ti019,.•„:..if-, , 212805 4.---
•".* •53 a:.k eini Commissioner el' .•
.. ,_. .. . . .. . . - •-
toSCOMMONWElith or MASSACHUSETT :, ...
• F'' 74g.:DIVISION OF PROFESSIONAL'LICENSURE!ri:i
: : ., eree-tkiCIAAsi, ,IToi,
ti,.•
Wr3t.rdstths THE FOLLOWING LICENSE 4AS A rat Ur
, W 4
REGISsYsTeR,9RN 9,,, ,r - ?o, g
,,. ...,..., icv -- ..-..
GENE A dthhiliER • ,,
.:,.,_ ., .. rt,,,, 1:i \L 4'
eii dobtAft
:AAA cb INC.,,,..A.:, , ,2
,......., i 4
•
' .204 OLD:-Faiva HOUSE q91:2;11, . i,,,„1-75/5615.‘‘ ,, II,
WEST;ARMOUTI-L 0 6.020731531V a :
'illa ' 7 1234
•P' &1592 n
as.. Jft 07/31/2019 42 rtt .. , „
LIDENSENUMBER-J.---EXPIRATION DAT .,--...J.SERIAL
.. •
•
•
• ,
0.,
DF-52416:D•A3-20
•
MS-5UD(E)/MS-10UD(E) Series
FireuTemarms
Five Zone Fire Alarm Control Panel
Ten Zone Fire Alarm Control Panel by Honeywell
General
The MS-5UD-3(E) is a five-zone FACP (Fire Alarm Control
Panel)and the MS-I OUD-7(E)is a ten-zone FACP.These con-
trol panels provide reliable fire signaling protection for small to
medium-sized commercial, industrial, and Institutional build-
ings. Both panels include built-in communicators for Central
Station Service and remote upload/download.
Each of these FACPs is compatible with System Sensor's
microprocessor-based i3 series detectors.These conventional -
smoke detectors can transmit a maintenance trouble signal to •–— r
the FACP indicating the need for cleaning and a supervisory
"freeze"signal when the ambient temperature falls below the - '' I C
detector rating. Additionally, both the MS-5UD-3 and MS-
LOUD-7 are compatible with conventional input devices such ---` ------ j
as two-and four-wire smoke detectors,pull stations,waterflow a
devices, tamper switches, and other normally-open contact t. ..
devices. Refer to the Fire•Lite Device Compatibility Document •A ( rtrl
for a complete listing of compatible devices. /
Outputs Include four NACs (Notification Appliance Circuits),
three programmable Form-C relays (factory programmed for
Alarm,Trouble,and Supervisory)and 24 VDC special applica-
tion resettable and nonresettable power outputs. The FACPs
supervise all wiring, AC voltage, battery level and telephone
–Strobe Synchronization for System Sensor, Wheelock,
line integrity. Gentex,Faraday,or Amseco devices.
Activation of a compatible smoke detector or any normally- –Selective Silence(horn-strobe mute).
open fire alarm initiating device will activate audible and visual _Temporal or Steady Signal.
signaling devices, illuminate an indicating LED, sound the
piezo sounder at the FACP, activate the communicator and –Silenceable or Nonsilenceable.
FACP alarm relay, and operate an optional module used to • Optional CAC-5X Style Z (Class A) Converter Module for
notify a remote station or initiate an auxiliary control function. NACs and IDCs(2 required for MS-10UD-7).
New options Include a UL listed printer, PRN-6F and FireLite's • Form-C Relays for Alarm,Trouble and Supervisory - Con-
IPDACT Internet Monitoring module. The FireWatch Series tact Ratings 2.0 A@ 30 VDC or 0.5 A @ 30 VAC(resistive).
Internet monitoring modules IPDACT-2 and IPDACT-2UD per- • 3.0 A total system current for MS-5UD-3.
mit monitoring of alarm signals over the Internet saving the • 7.0 A total system current for MS-10UD-7.
monthly cost of two telephone lines.Although not required,the
secondary telephone line may be retained providing backup • Optional Dress Panel DP-51050
communication over the public switched telephone line. • Optional Trim Ring TR-CE for semi-flush mounting.
NOTE: The MS-5UD-3E and MS-10UD-7E offers the same fea- • 24 volt operation.
tures as the MS-5UD-3 and MS-10UD-7 but allow connection to • Low AC voltage sense.
240 VAC. Unless otherwise specified, the information in this data • Alarm Verification.
sheet applies to both the 120 VAC and the 240 VAC versions of
these panels. • PAS(Positive Alarm Sequence).
NOTE:For ULC-listed models,see DF-60440. • Automatic battery trickle charger.
• Up to eight ANN-BUS annunciators:
Features -Optional 8 zone Relay Module ANN-RLY.
• Listed to UL Standard 864,9th edition. –Optional LED Annunciator Module ANN-LED,
• Built-in DACT(Digital Alarm Communicator/Transmitter). –Optional Remote Annunciator ANN-80.
• Style B(Class B) IDC(Initiating Device Circuit) –Optional Remote Printer Gateway ANN-S/PG.
–MS-5UD-3-five IDCs. –Optional LED Annunciator Driver ANN-I/O.
–MS-10UD-7-ten IDCs. • Optional 4XTMF module (conventional reverse polarity/city
• Style Y(Class B)NAC(Notification Appliance Circuit)-spe- box transmitter).
cial application power PROGRAMMING AND SOFTWARE:
–MS-5UD-3-four NACs. • Can be programmed at the panel with no special software
–MS-10UD-7-four NACs. or additional equipment.
• Notification Appliances may be programmed as • Programmable Make/Break Ratio.
–Silence Inhibit. • Upload/Download(local or remote)of program and data via
–Auto-Silence. integral DACT.
DF-52416:D•07/26/2010—Page 1 of 4
USER INTERFACE: • SYSTEM RESET(lamp test) •
• Built-in DACT(Digital Alarm Communicator/Transmitter). • DRILL
• Integral 80-character LCD display with backlighting and
keypad. Terminal Blocks
• Real-time clock/calendar with automatic daylight savings AC Power—TB1:
adjustments. • MS-5UD-3 (FLPS-3 Power Supply): 120 VAC, 50/60 HZ,
• ANN-BUS for connection to remote annunciators. 1.00 A.
• Audible or silent walk test capabilities. • MS-5UD-3E (FLPS-3 Power Supply): 240 VAC, 50 HZ,
• Piezo sounder for alarm,trouble,and supervisory. 0.54 A.
• MS-10UD-7 (FLPS-7 Power Supply): 120 VAC, 50/60 HZ,
Controls and Indicators 3.80 A.
LED INDICATORS • MS-10UD-7E(FLPS-7 Power Supply):240 VAC,50/60 HZ,
2.20 A.
• FIRE ALARM(red) Wire size:minimum 14 AWG(2.00 mm2)with 600 V insulation.
• SUPERVISORY(yellow) Supervised,nonpower-limited.
• TROUBLE(yellow) Battery(sealed lead acid only)—J12:
• AC POWER(green) • Maximum Charging Circuit-Normal Flat Charge:27.6 VDC
• ALARM SILENCED(yellow) ® 1.4 A.Supervised,nonpower-limited.
CONTROL BUTTONS • Maximum Charger Capacity: 18 AH battery for MS-SUD-
• ACKNOWLEDGE 3(E),and 26 AH battery for MS-10UD-7(E).[Two 18 Ah bat-
teries can be housed in the FACP cabinet. Larger batteries
• ALARM SILENCE require separate battery box such as the BB-26 or BB-55.]
.< - .-l • -t1 ,f2;„;•:-„i1 Depth=5.20r(13.23 cm)
Top
♦_Door= 16.821"(42.73 cm) 0, Depth=
Backbox=16.65•(42.29 cm) 1,__5.257",....„,s15.257• ►I
(13.353 cm)
t.
Door=19.26•(48.92 cm) 1 O
Backbox=19.0'(48.26 cm) } ,
I ] e 1
Left Side Right Side
Bottom `-
Cabinet Measurements
Page 2 of 4—DF-52416:D•07/26/2010
• • Minimum Battery Size:7 AH. MS-10UD-7E:Same as above with 240 VAC FLPS-7.
Initiating Device Circuits—TB4 (and TB 6 on MS-10UD-7 IPDACT, IPDACT-2/2UD Internet Monitoring Module:
only): Mounts in bottom of enclosure with optional mounting kit(PN
• Alarm Zones 1 -5 on TB 4(MS-5UD-3 and MS-10UD-7). IPBRKT). Connects to primary and secondary DACT tele-
phone• Alarm Zones 6-10 on TB6(MS-10UD-7 only). output ports for Internet communications over customer
provided ethernet Internet connection. Requires compatible
• Supervised and power-limited circuitry. Teldat Visoralarm Central Station Receiver.Can use DHCP or
• Operation:All zones Style B(Class B). static IP. (See data sheet DF-60407 for more information.)
• Normal Operating Voltage:Nominal 20 VDC. IPBRKT:Mounting kit for IPDACT in common enclosure.
• Alarm Current: 15 mA minimum. IPSPLT: Y Adaptor option to allow connection of both panel
• Short Circuit Current:40 mA max. dialer outputs to one cable input to IPDACT(sold separately).
• Maximum Loop Resistance: 100 ohms. OPTIONAL MODULES
• End-of-Line Resistor: 4.7K ohm, 1/2 watt (P/N 71252 UL-
CAC-5X:Optional(Class A)Converter Module.Converts Style
listed).
• StandbyCurrent:2 mA. B(ClY ClB) Initiating Device Circuits ta ceStle D(Class A);tand
Style Y (Class B) Notification Appliance Circuits to Style Z
Refer to the Fire•Lite Device Compatibility Document for listed (Class A). Connects to J2 on the MS-5UD-3 and MS-1 CUD-
compatible devices. 7(E)main circuit board and to J7 on the MS-10UD-7(E).
Notification Appliance Circuits —TBS (and TB 7 on MS- NOTE: Two Class A Converter Modules are required for the ten-
1 OUD-7 only): zone panel.
• Four NACs 4XTMF:Transmitter module.Provides a supervised output for
• Operation:Style Y(Class B) local energy municipal box transmitter and alarm and trouble
reverse polarity. Includes a disable switch and disable trouble
• Special Application power LED.A module jumper option allows the reverse polarity circuit
• Supervised and power-limited circuitry to open with a system trouble condition If no alarm conditions
• Normal Operating Voltage:Nominal 24 VDC exists.Mounts to the main circuit board connectors J4 and J5.
• Maximum Signaling Current: 3.0 A for MS-5UD-3, 2.5 A COMPATIBLE ANNUNCIATORS
maximum per NAC; 7.0 A for MS-10UD-7(E), 3.0 A maxi-
mum per NAC. ANN-80: Remote LCD Annunciator. Mimics the Information
• End-of-Line Resistor:4.7K ohm, 1/2 watt(Part#71252) displayed on the FACP's LCD. Red. (For white, order: ANN-
80-W.)
• Max.Wiring Voltage Drop:2 VDC ANN-LED: LED Annunciator with three LEDs for each zone:
Refer to the Fire•Lite Device Compatibility Document for corn- Alarm, Trouble, and Supervisory. Mounts in the DP-51050(B)
patible listed devices. dress panel. Red.(For white,order ANN-LED-W.)
Form C Relays—T88: ANN-RLED: LED Annunciator with three alarm (red) indica-
• Relay I(factory default programmed as Alarm Relay) tors for up to 30 input zones or addressable points.(Red. For
• Relay 2 (factory default programmed as fail-safe Trouble white,order ANN-LED-W.)(See DF-60241).
Relay) ANN-RLY: Relay module.Mounts Inside the cabinet.Provides
• Relay 3(factory default programmed as Supervisory Relay) ten Form C relays.
Special Application Resettable Power—TB9: ANN-S/PG:Serial/parallel printer gateway.Provides a connec-
• Jumper selectable by JP31 for resettable or nonresettable tion for a serial or parallel printer.
power. ANN-I/O: Driver module. Provides connections to a user-sup-
• Operating voltage:24 VDC nominal. plied graphic annunciator.
• Maximum available current: 500 mA-appropriate for pow- ACCESSORIES
Bring four-wire smoke detectors. DP-51050: Optional dress panel. Restricts access to the sys-
• Power-limited circuit. tem wiring while allowing access to the membrane switch
Refer to the Fire•Lite Device Compatibility Document for listed panel.
compatible devices. BB-26: Battery backbox, holds up to two 25 AH batteries and
Remote Sync Output-TB2: Remote power supply synchro- CHG-75.
nization output,only required for the MS-5UD-3.24 VDC nom- BB-55:Battery backbox,holds up to two 25 AH batteries.
final special application power. Maximum current is 40 mA.
End-of-Line Resistor: 4.7K ohm. Supervised and power-lim- TR-CE:Optional trim-ring for semi-flush mounted cabinets.
ited circuit. PRN-6F:UL listed printer.
Product Line Information
MS-5UD-3: Five-zone, 24-volt Fire Alarm Control Panel
(includes backbox, FLPS-3 power supply, technical manual,
and a frame & post operating instruction sheet). 120 VAC
operation.
MS-5UD-3E: Same as MS-5UD-3 except for 240 VAC opera-
tion.
MS-10UD-7: Ten-zone, 24-volt Fire Alarm Control Panel
(includes backbox, FLPS-7 power supply, technical manual,
and a frame&post operating Instruction sheet).
DF-52416:D•07/26/2010—Page 3 of 4
•
f .
SYSTEM SPECIFICATIONS
System Capacity Temperature and Humidity Ranges
• Annunciators 8 This system meets NFPA requirements for operation at 0 —
49°C/32 — 120°F and at a relative humidity 93% t 2% RH
Electrical Specifications (noncondensing) at 32°C t 2°C (90°F d: 3°F). However, the
• MS-SUDS (FLPS-3 Power Supply): 120 VAC, 60 HZ, useful life of the system's standby batteries and the electronic
pP y): components may be adversely affected by extreme tempera-
1.O A lure ranges and humidity. Therefore, it is recommended that
• MS-10UD-7 (FLPS-7 Power Supply): 120 VAC, 60 HZ, this system and Its peripherals be installed In an environment
3.90 A with a normal room temperature of 15—27°C/60 y 80°E
• MSSUD-3E (FLPS3 Power Supply): 240 VAC, 50 HZ,
0.54 A. Agency Listings and Approvals
• MS-10UD-7E (FLPS-7 Power Supply): 240 VAC, 50 HZ, The listings and approvals below apply to the basic MS-5UD-3
2.20 A. and MS-10UD-7 control panels. In some cases, certain mod-
• Wire size: minimum 14 AWG (2.0 mm2)with 600 V Insula- Liles or applications may not be listed by certain approval
tion,supervised,nonpower-limited agencies,or listing may be in process.Consult factory for lat-
est listing status.
Cabinet Specifications : UL Listed:File 5624
Door: 19.26' (48.92 cm.) high x 16.82' (42.73 cm.) wide x • FM Approved
0.72' (1.82 cm.) deep. Backbox: 19.00" (48.26 cm.) high x • CSFM:7165-0075:0214
16.65' (42.29 cm.)wide x 525' (13.34 cm.) deep.Trim Ring • MEA: MEA:333-07-E
(TR-CE):22.00'(55.88 cm.)high x 19.65'(49.91 cm.)wide.
NOTE:For ULClisted models,see DF-60440.
Shipping Specifications NFPA Standards
Dimensions:
-20.00' The MS-5UD-3(E) and MS-10UD-7(E) complies with the fol-
(50.80 cm.)high 9 lowing NFPA 72 Fire Alarm Systems requirements:
—22.5'(57.15 cm.)wide —LOCAL (Automatic, Manual, Waterflow and Sprinkler
. —8.5'(21.59 cm.)deep. Supervisory).
Weight:27 lb(12.20 kg) —AUXILIARY(Automatic,Manual and Waterflow)(requires
4XTMF).
—REMOTE STATION (Automatic, Manual and Waterflow)
(Where a DACT Is not accepted, the alarm, trouble and
supervisory relays may be connected to UL 864 listed
transmitters. For reverse polarity signaling of alarm and
trouble,4XTMF is required.)
—PROPRIETARY(Automatic,Manual and Waterflow).
—CENTRAL STATION (Automatic, Manual and Waterflow,
and Sprinkler Supervised).
—OT, PSDN (Other Technologies, Packet-switched Data
Network)
FlraUtee Alarms and System Sansord) are registered trademarks of
Honeywell International Inc.
02010 by Honeywell International Inc.All rights reserved.Unauthorized use
of this document Is strictly prohibited.
ISO 9001 This document is not Intended to be used for Installation purposes.
We try to keep our product Information up-to-date and accurate.
C E R TOFU E O We cannot cover all specific applications or anticipate all requirements.
RWPERIIR A NNJFAfl1IB6 All specifications are subject to change without notice.
QUALITY SYSTEM Made in the U.S.A. •
For more Information,contact Fire•Ute Alarms.Phone:(800)627-3473,FAX(877)699-4105.
www.firelite.com
Page 4 of 4—DF-52416:D•07/26/2010