HomeMy WebLinkAboutFinal-DC315-US-EN-SDS-220219
Water based intumescent paint for foam plastic
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Date of issue: 8 December 2017 Version: 1.0
8 December 2017 EN (English) Page 1
SECTION 1: Identification
1.1. Identification
Product form : Mixture
Trade name : Water based intumescent paint for foam plastic
Product code : DC315
1.2. Recommended use and restrictions on use
Use of the substance/mixture : Fireproof coating for foam plastic
1.3. Supplier
International Fireproof Technology, Inc. 17528 Von Karman Ave. Irvine, CA 92614 T 949-975-8588 tom@painttoprotect.com (Tom Hsiang)
1.4. Emergency telephone number
Emergency number : CHEMTREC 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Acute toxicity (oral), Category 4 H302 Harmful if swallowed. Serious eye damage/eye irritation, Category 2B H320 Causes eye irritation Full text of H statements: see section 16
2.2. GHS Label elements, including precautionary statements
GHS-US labelling
Hazard pictograms (GHS-US) : None
Signal word (GHS-US) : None
Hazard statements (GHS-US) : The mixture does not meet the criteria for classification.
Precautionary statements (GHS-US) : P264 - Wash hands thoroughly after handling. P270 - Do not eat, drink or smoke when using this product. P301+P312 - If swallowed: Call a POISON CENTER, a doctor if you feel unwell P305+P351+P338 - If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P330 - Rinse mouth. P337+P313 - If eye irritation persists: Get medical advice/attention. P501 - Dispose of contents/container to comply with applicable local, national and international regulation.
2.3. Other hazards which do not result in classification
other hazards which do not result in classification : Titanium dioxide is in a form that is not available for respiration.
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
The manufacturer lists no ingredients as hazardous to health according to OSHA 29 CFR 1910.1200.
Water based intumescent paint for foam plastic
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
8 December 2017 EN (English) 2/7
Full text of hazard classes and H-statements: see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures after inhalation : Move the affected person away from the contaminated area and into the fresh air. Get medical advice/attention if you feel unwell.
First-aid measures after skin contact : Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. If skin irritation or rash occurs: Get medical advice/attention.
First-aid measures after eye contact : Rinse immediately with plenty of water for 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Get medical advice/attention.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects after skin contact : May cause mild irritation in sensitive individuals.
Symptoms/effects after eye contact : Causes eye irritation.
Symptoms/effects after ingestion : Harmful if swallowed.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media : Use extinguishing media appropriate for surrounding fire.
Unsuitable extinguishing media : None known.
5.2. Specific hazards arising from the chemical
Fire hazard : Not classified as flammable but will burn. On combustion forms: Carbon oxides (CO, CO2). Nitrogen oxides. Metal oxides.
Explosion hazard : Heating will cause pressure rise with risk of bursting and subsequent explosion.
Reactivity : Stable under normal conditions of use.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent firefighting water from entering the environment.
Protective equipment for firefighters : Do not enter fire area without proper protective equipment, including respiratory protection. refer to section 8.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures : Avoid contact with eyes. Avoid breathing mist or vapor. Spilled material may present a slipping hazard.
6.1.1. For non-emergency personnel
Emergency procedures : Evacuate unnecessary personnel. Wear personal protective equipment as required.
6.1.2. For emergency responders
Protective equipment : Equip cleanup crew with proper protection. Wear approved self-contained breathing apparatus (set on positive pressure mode). Refer to section 8.
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
Water based intumescent paint for foam plastic
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
8 December 2017 EN (English) 3/7
6.3. Methods and material for containment and cleaning up
Methods for cleaning up : Small spills: Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor.
Large spills: Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Dispose of via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilled product. Note: see
Section 1 for emergency contact information and Section 13 for waste disposal.
6.4. Reference to other sections
Refer to sections 8 and 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling : Provide good ventilation in process area to prevent formation of vapor. Avoid contact with eyes. Avoid breathing mist or vapor. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood.
Hygiene measures : Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling. Handle in accordance with good industrial hygiene and safety practice.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions : Keep only in the original container in a cool, well ventilated place away from incompatible materials. Keep container closed when not in use.
Incompatible materials : Organic solvent. Strong acids. Alkalis. Oxidizing agent.
Storage temperature : ≈ 5 - 35 °C (Use up as soon as possible after opening the lid)
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Ammonium polyphosphate (68333-79-9)
Not applicable
Titanium dioxide (13463-67-7)
ACGIH Local name Titanium dioxide
ACGIH ACGIH TWA (mg/m³) 10 mg/m³
ACGIH Remark (ACGIH) LRT irr; A4
ACGIH Regulatory reference ACGIH 2017
OSHA OSHA PEL (TWA) (mg/m³) 15 mg/m³
OSHA Regulatory reference (US-OSHA) OSHA
8.2. Appropriate engineering controls
Appropriate engineering controls : Provide adequate ventilation. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.
8.3. Individual protection measures/Personal protective equipment
Hand protection:
Impervious gloves e.g. PVC, nitrile rubber, butyl rubber
Eye protection:
Chemical goggles or safety glasses
Respiratory protection:
Water based intumescent paint for foam plastic
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
8 December 2017 EN (English) 4/7
In case of inadequate ventilation wear respiratory protection. NIOSH/MSHA approved air purifying respirator should be used if operating conditions produce airborne concentrations that exceed exposure limits for any individual components. If conditions immediately dangerous to life or health exist, use NIOSH/MSHA self-contained breathing apparatus (SCBA).
Other information:
Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties
Physical state : Liquid Colour : White, grey
Odour : Mild emulsion odor
Odour threshold : No data available pH : 6 - 8
Melting point : No data available
Freezing point : No data available Boiling point : > 100 °C
Flash point : No data available Relative evaporation rate (butylacetate=1) : No data available Flammability (solid, gas) : Not applicable
Vapor pressure : No data available Relative vapor density at 20 °C : No data available Relative density : No data available
Density : 1.35±0.1 (Specific gravity)
Solubility : Miscible with water.
Log Pow : No data available Auto-ignition temperature : No data available
Decomposition temperature : No data available Viscosity, kinematic : No data available Viscosity, dynamic : 8000 - 20000 cP
Explosive limits : No data available Explosive properties : No data available Oxidising properties : No data available
9.2. Other information
Volatile components % : 30 – 45 %
SECTION 10: Stability and reactivity
10.1. Reactivity
Stable under normal conditions of use.
10.2. Chemical stability
Stable under normal conditions of use.
10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
None known.
10.5. Incompatible materials
Strong acids. Organic solvents. Alkalis. Oxidizing agent.
10.6. Hazardous decomposition products
On combustion forms: Nitrogen oxides. Carbon oxides (CO, CO2). Metal oxides.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Water based intumescent paint for foam plastic
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
8 December 2017 EN (English) 5/7
Acute toxicity : Oral: Harmful if swallowed.
Water based intumescent paint for foam plastic
ATE (oral) 1666 mg/kg bodyweight
Skin corrosion/irritation : Not classified
pH: 6 - 8
Serious eye damage/irritation : Causes eye irritation.
pH: 6 - 8
Respiratory or skin sensitisation : Not classified
Germ cell mutagenicity : Not classified
Carcinogenicity : Not classified
Titanium dioxide (13463-67-7)
IARC group 2B - Possibly carcinogenic to humans
In OSHA Hazard Communication Carcinogen list Yes
Reproductive toxicity : Not classified
Specific target organ toxicity (single exposure) : Not classified
Specific target organ toxicity (repeated exposure) : Not classified
Aspiration hazard : Not classified
Likely routes of exposure : Ingestion. Inhalation. Skin and Eye contact.
Symptoms/effects after skin contact : May cause mild irritation in sensitive individuals.
Symptoms/effects after eye contact : Causes eye irritation.
Symptoms/effects after ingestion : Inhalation of titanium dioxide dustmay cause cancer, however due to the physical form of the product, inhalation of dust is not likely. Expected to be a low ingestion hazard.
SECTION 12: Ecological information
12.1. Toxicity
Ecology - general : The product components are not classified as environmentally hazardous.
Ammonium polyphosphate (68333-79-9)
LC50 fish 1 > 500 mg/l (Exposure time: 96 h - Species: Brachydanio rerio [static])
LC50 fish 2 123 mg/l (Exposure time: 96 h - Species: Oncorhynchus mykiss [flow-through])
12.2. Persistence and degradability
Water based intumescent paint for foam plastic
Persistence and degradability Not established.
12.3. Bioaccumulative potential
Water based intumescent paint for foam plastic
Bioaccumulative potential Not established.
12.4. Mobility in soil
No additional information available
12.5. Other adverse effects
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Disposal methods
Product/Packaging disposal recommendations : Dispose of contents/container to comply with applicable local, national and international regulation, a licensed hazardous-waste disposal contractor or collection site except for empty clean containers which can be disposed of as non-hazardous waste.
Water based intumescent paint for foam plastic
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
8 December 2017 EN (English) 6/7
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Not regulated
Transportation of Dangerous Goods
Not regulated
Transport by sea
Not regulated
Air transport
Not regulated
SECTION 15: Regulatory information
15.1. US Federal regulations
All components of this product are listed, or excluded from listing, on the United States Environmental Protection Agency Toxic Substances Control Act (TSCA) inventory
15.2. International regulations
CANADA Ammonium polyphosphate (68333-79-9)
Listed on the Canadian DSL (Domestic Substances List)
Titanium dioxide (13463-67-7)
Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
Ammonium polyphosphate (68333-79-9)
Listed on the EEC inventory EINECS (European Inventory of Existing Commercial Chemical Substances)
Titanium dioxide (13463-67-7)
Listed on the EEC inventory EINECS (European Inventory of Existing Commercial Chemical Substances)
National regulations
Ammonium polyphosphate (68333-79-9)
Listed on the AICS (Australian Inventory of Chemical Substances) Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China) Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory Listed on the Japanese ISHL (Industrial Safety and Health Law) Listed on the Korean ECL (Existing Chemicals List) Listed on NZIoC (New Zealand Inventory of Chemicals) Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances) Listed on Turkish inventory of chemical Listed on the TCSI (Taiwan Chemical Substance Inventory)
Titanium dioxide (13463-67-7)
Listed on the AICS (Australian Inventory of Chemical Substances) Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China) Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory Listed on the Japanese ISHL (Industrial Safety and Health Law) Listed on the Korean ECL (Existing Chemicals List) Listed on NZIoC (New Zealand Inventory of Chemicals) Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances) Listed on INSQ (Mexican National Inventory of Chemical Substances) Listed on Turkish inventory of chemical Listed on the TCSI (Taiwan Chemical Substance Inventory)
15.3. US State regulations
Water based intumescent paint for foam plastic
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
8 December 2017 EN (English) 7/7
California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain any chemicals currently lis ductive toxins. For more information go to www.P65Warnings.ca.gov.
SECTION 16: Other information
Date of Issue : 8 December 2017
Other information : None.
Abbreviations and acronyms:
PVC Polyvinyl chloride
SDS US (GHS HazCom 2012) This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product