Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
260000-004 Electrical Fire Alarm System_WBA_A
Delphi Construction 255 Bear Hill Road, Suite 301 Waltham, Massachusetts 02451 Phone: (781) 893-9900 Fax: (781) 893-9898 Project: 10-02017 - Yarmouth Gardens (Residences at) 497 Route 28 West Yarmouth, Massachusetts 02673 Electrical: Fire Alarm System SPEC SECTION:260000 - Electrical CREATED BY: STATUS: Open DATE CREATED: 04/21/2021 ISSUE DATE:04/21/2021 REVISION:0 RESPONSIBLE CONTRACTOR: Glynn Electric, Inc.RECEIVED FROM:Katelyn Holway RECEIVED DATE: 04/20/2021 SUBMIT BY: // FINAL DUE DATE:05/05/2021 LOCATION: Buildings 1 and 2 TYPE:Product Information COST CODE: 160 - ELECTRICAL APPROVERS:Phil Reville (Winslow Architects, Inc.) BALL IN COURT: Phil Reville (Winslow Architects, Inc.) DISTRIBUTION: Sue Ellen Walker (Delphi Construction Inc.) , Tej Vashee (Winslow Architects, Inc.) , James Perrine (Commonwealth Community Developers) , Michael Paronich (Delphi Construction Inc.) , Chris Kicza (Winslow Architects, Inc.) , Scott Haskell (Delphi Construction Inc.) , John Cavacas (Tierney Development Services, LLC) DESCRIPTION: ATTACHMENTS: SUBMITTAL WORKFLOW #NAME SUBMITTER/ APPROVER SENT DATE DUE DATE RETURNED DATE RESPONSE ATTACHMENTS COMMENTS 1 Sue Ellen Walker Submitter 4/21/2021 4/21/2021 Submitted 21JW01 Fire Alarm PD & Tier II Drawings Submittal.pdf Submitted for A/E review 2 Phil Reville Approver 4/21/2021 5/5/2021 Pending Contractor's Stamp , APPROVED FOR A/E REVIEW REVISE & RESUBMIT APPROVED AS NOTED FOR A/E REVIEW REJECTED IF SO MARKED, APPROVAL IS GIVEN FOR DESIGN ONLY. IT DOES NOT RELIEVE THE SUBCONTRACTOR FROM COMPLYING WITH THE REQUIREMENTS FO THE CONTRACT, CONTRACT DRAWINGS AND SPECIFICATIONS. THE SUBCONTRACTOR SHALL BE RESPONSIBLE FOR ALL DIMENSIONS, QUANTITIES, SCHEDULES AND FIELD CONDITIONS. Delphi Construction Page 1 of 2 Printed On: 04/21/2021 01 :12 PM Submittal #260000-004.0 260000 - Electrical WB&A Wozny/Barbar & Associates, Inc. C O N S U L T I N G E N G I N E E R S 1076 Washington Street, Hanover, MA 02339•Tel 781.826.4144•Fax 781.924.5792•www.wbaengineers.com 161 Exchange Street, 3rd Floor, Pawtucket, RI 02860 SHOP DRAWING REVIEW COMMENTS DATE IN: April 21, 2021 (Via E-Mail) DATE OUT: May 6, 2021 (Via E-Mail) WBA JOB NUMBER: 17147 JOB NAME: Residences At Yarmouth Gardens SUBMITTAL NUMBER: 260000-004.0 TO: Phil Reville SUBMITTAL NAME: Fire Alarm System Winslow Architects FROM: Salim Afsar REVISION NUMBER: 0 WOZNY/BARBAR & ASSOCIATES, INC. Consulting Engineers SUBMITTAL REVIEW Review of this submittal is only to confirm with the design concept of the work and with the information given to the Contract Documents. The Contractor is still responsible for dimensions to be confirmed and correlated at the site, the fabrication process, and the means, methods, techniques, sequence, and procedures of construction and coordination of the work with all of the other trades. Approval of this submittal does not relieve the contractor of his requirements to comply with all drawings, specifications. The submittals have been reviewed for the general requirements only. ☒ No Exceptions Taken ☐ Revise and Resubmit ☐ Not Accepted ☐ Accepted as Noted NO COMMENTS COMMENTS REVIEWED BY PLUMBING ☐ ☐ FIRE PROTECTION ☐ ☐ MECHANICAL ☐ ☐ Reviewer ELECTRICAL ☐ ☒ RJA COMMUNICATIONS ☐ ☐ SECURITY ☐ ☐ Comments: 1. The ‘Fire Alarm’ submittal has been reviewed for its engineering performance only. The contractor shall still be responsible for the quantities of equipment, the installation of the equipment in accordance with the unit manufacturer’s recommendations and the installation of a complete operating system in line with the intent of the drawing. . Architect's Stamp Engineers Stamp Delphi Construction Page 2 of 2 Printed On: 04/21/2021 01 :12 PM Submittal #260000-004.0 260000 - Electrical 70 Industrial Park Drive Plymouth, MA 02360 Phone:508-732-8933 Fax:508-732-8934 Yarmouth Gardens 497 Route 28 West Yarmouth, MA 02673 Glynn Electric Project: #21JW01 Fire Alarm PD & Tier II Drawings Submittal General Contractor: Submittal Date: Delphi Construction 255 Bear Hill Rd, Suite 301 Waltham, MA 02451 April 15, 2021 Fire Alarm System Submittal 70 Corporate Park #1215 Pembroke, MA 02359 garye@firetechnologiesllc.com Contractor: Project: Date: Product: FTLLC Contact: Gary J. Emond SET 508.837.1552 Yarmouth Gardens 04/08/2021 Honeywell Farenhyt Quantity Part Number Description IFP‐300 Intelligent Fire Alarm Control Panel Intelligent Addressable Thermal Detector, White 6" Mounting Base, White Addressable Monitor Module Intelligent Addressable Photoelectric Detector, White Addressable Manual Dual Action Pull Station Addressable Relay Module Low Frequency (520 Hz) Sounder, White Mini‐Horn Sounder, 12/24 Volts, White L‐Series, Red, Wall‐Mountable, Clear Lens, 2‐wire, Horn/Strobe L‐Series, Red, Wall‐Mounted, Clear Lens, Strobe 6" Alarm Bell 24VDC, red Strobe Standard Multi‐Candela, outdoor/red 12 Volt, 18AH SLA Battery 12 Volt, 7AH SLA Battery Remote Alarm Indicator 120VAC/9VDC Photoelectric Smoke Alarm 120VAC/9VDC Photoelectric Smoke/CO Alarm 120VAC/9VDC Photoelectric Smoke Alarm w 177cd Strobe 120VAC/9VDC Photoelectric Smoke/CO Alarm w 177cd Strobe 120VAC/9VDC Hearing Impaired 177cd Strobe 24VDC 8 Ampere UL Listed Fire Power Supply 24VDC 8 Ampere UL Listed Fire Power Supply Class A Module Power Supply Battery Calculations 2 5 45 30 40 15 8 68 38 31 4 2 2 4 4 2 64 38 4 4 2 2 2 2 2 IDP‐HEAT‐W B300‐6 IDP‐MONITOR IDP‐PHOTO‐W IDP‐PULL‐DA IDP‐RELAY HWL‐LF MHW P2RL SRL SSM24‐6 SRK PS12180 PS1270 RA100Z 7010B SC7010BV 7020BSL 7030BSL SLED177I FF8 HPP31076 FF8‐BC IFP‐300‐BC Intelligent Fire Alarm Control Panel Battery Calculations Yarmouth Gardens Bill of Materials FEATURES & BENEFITS • Network support for up to 32 Sites • Built-in support for up to 159 IDP/SK detectors and 159 IDP/SK modules or 127 SD SLC devices • Four line LCD display with 40 characters per line • Available in a red or black cabinet • IFP-300 can be surface or flush mounted • Built-in USB interface for convenient and quick programming • Firmware can be upgraded in the field • Network card allows copper network connection with a multi-mode or single-mode fiber connection option • Built-in dual phone line, digital alarm communicator/ transmitter (DACT), IP or optional cellular technologies • JumpStart AutoProgramming® feature for easy programming • Supports up to four SWIFT wireless gateways. Each gateway can have up to 49 wireless devices • Supports Class B (Style 4) and Class A (Style 6 or Style 7 configuration for SLC, and SBUS. • Built in synchronization for appliances from AMSECO, Gentex®, System Sensor®, and Wheelock IFP-300 / IFP-300B Intelligent Fire Alarm Control Panel The IFP-300 (red) and IFP-300B (black) are intelligent analog/addressable fire alarm control panels (FACP). The basic IFP-300 panel contains one built in signaling line circuit (SLC), which can support 159 (IDP/SK) System Sensor® sensors and 159 IDP/SK modules or 127 (SD) Hochiki® devices per loop. Additional SLC loops can be added using the model 6815 SLC expander for SK/IDP devices to increase the overall point capacity to a maximum of 300 points per panel, or model 5815XL for SD devices to increase the overall point capacity to a maximum of 254 points per panel. IFP-300 has the interconnection capability for up to 32 panels. The system has two modes of operation, multiple panels covering one larger building, or multiple independent buildings. To network panels together use the SK-NIC network interface card. Copper wire or fiber optic cable panel connectivity can be used within the same networked system. IFP-300 has a built-in dual phone line, digital alarm communicator/ transmitter (DACT), IP or optional cellular technologies, Form C trouble relay, and two programmable Form C relays. IFP-300 has powerful features such as detector sensitivity, day/night thresholds, drift compensation, pre-trouble maintenance alert, and calibration trouble alert. The IFP-300 supports a variety of devices, including RA-2000, RA-1000 or RA-100 remote annunciator, 5824 serial/parallel printer interface module (for printing system reports), RPS-1000 power module, and IDP, SK or SD devices. IFP-300B For a complete listing of all compliance approvals and certifications, please visit www.farenhyt.com. Microsoft, Windows, and the Windows Logo are registered trademarks or trademarks of Microsoft Corporation. SWIFT® and Honeywell® are registered trademarks of and Farenhyt™ is a trademark of Honeywell International, Inc. This document is not intended to be used for installation purposes. We try to keep our product information up-to date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For Technical Support, Please call 800-446-6444. IFP-300 Technical Specifications PHYSICAL: Overall Dimensions: 26.4”H x 16.4"W x 4.11”D Weight: 45 lbs. Color: Red or Black ENVIRONMENTAL Operating Temperature: 32°F to 120°F (0°C to 49°C) Humidity: 0 to 93% relative humidity (non- condensing) ELECTRICAL: IFP-300 Primary AC: 120VAC @ 60 Hz, 3.3A Total Accessory Load: 6A @ 24VDC power-limited Standby Current: 190mA Alarm Current: 250mA Battery Charging Capacity: 17 to 55AH Battery Size: 18AH max. allowed in control panel cabinet. Larger capacity batteries can be housed in RBB accessory cabinet. AGENCY LISTINGS AND APPROVALS NFPA 13, NFPA 15, NFPA 16, NFPA 70, & NFPA 72: Central Station; Remote Signalling; Local Protective Signalling Systems; Auxiliary Protected Premises Unit; & Water Deluge Releasing Service UL Listed CSFM: 7165-0559:0504 FDNY: COA#6245 Seismic (CA) (pending) FM approved APPROVED RELEASING SOLENOIDS Asco T8210A107 24 VDC 3 A max 0 Hz Asco 8210G207 24 VDC 3 A max 0 Hz COMPATIBLE DEVICES See the data sheets listed below for a complete listing of the IDP, SK, SWIFT or SD devices. 350361: IDP Device Protocol data sheet 53623: SK Device Protocol data sheet 350360: SD Device Protocol data sheet 350615 & 350617: SWIFT devices data sheet ORDERING INFORMATION IFP-300: Intelligent Fire Alarm Control Panel. Red Cabniet. IFP-300B: Intelligent Fire Alarm Control Panel Black Cabinet. SBUS ACCESSORIES RA-2000, RA-1000, RA-1000R, RA-100, RA-2000GRAY: Remote annunciators 6815: Signal Line Circuit (SLC) Expander for IDP or SK devices 5815XL: Signal Line Circuit (SLC) Expander for SD devices RPS-1000: Power Supply 5496: NAC Expander 5824: Serial/Parallel Module 5880: LED I/O Module 5865-3 or 5865-4: LED Annunciator 5883: Relay Interface MISCELLANEOUS ACCESSORIES HFSS: Software Suite. Provides programming, upload/download and event reporting RBB: Remote Battery Box Cabinet. Use for backup batteries up to 35 AH. Dimensions: 16" W x 10" H x 6" D SK-SCK: Seismic Compliance Kit SK-NIC: Network Interface Card SK-NIC-KIT: Installation Accessory Kit SK-FML: Fiber-Optic Multi Mode, transmitter and receiver SK-FSL: Fiber-Optic Single Mode CELL-MOD: Cellular Communicator in Plastic Enclosure CELL-CAB-SK: Cellular Communicator in Metal Enclosure with lock and key 351603 | A | 11/17 © 2017 Honeywell International Inc. For more information Learn more about Honeywell’s Farenhyt Series and other products available by visiting www.farenhyt.com Honeywell Farenhyt 12 Clintonville Road Northford, CT 06472 800-328-0103 FEATURES & BENEFITS • Sleek and stylish contemporary design • Advanced thermal technology for fast response • Fixed temperature model (SK-HEAT-W) factory preset to 135°F (57°C) • Rate-of-rise model (IDP-HEAT-W-ROR), 15°F (8.3°C) per minute • High temperature model (IDP-HEAT- W-HT) factory preset to 190°F (88°C) • Addressable by device • Two-wire SLC connection • Visible LEDs “blink” every time the unit is addressed • Built-in tamper- resistant feature • 360°-field viewing angle of the visual alarm indicators (two bi-color LEDs). LEDs blink green in Normal condition and turn on steady red in Alarm. • Integral communications and built-in device-type identification • Remote test feature from the panel • Built-in functional test switch activated by external magnet • Walk test with address display (an address of 121 will blink the detector LED 12- (pause)-1) • Low standby current • Designed for directsurface or electrical box mounting • Sealed against back pressure • Plugs into separate base for ease of installation and maintenance • SEMS screws for wiring of the separate base • Optional remote, single- gang LED accessory Farenhyt IDP-HEAT-W Series Intelligent Thermal (Heat) Detector Honeywell IDP-HEAT-W Series intelligent thermal detectors are designed for both performance and aesthetics. A new modern, sleek, contemporary design and advanced thermal technologies make the IDP-HEAT-W Series ideal for both system operation and building design. The point ID address, set using rotary decimal switches, provide specific detector locations. The series includes a 135°F/57°C fixed temperature, rate-of-rise and a 190°F/88°C fixed high-temperature detectors. These thermal detectors provide effective, intelligent property protection in a variety of applications. IDP-HEAT-W In B300-6 base APPLICATIONS Use thermal detectors for protection of property. For further information, refer to manual I56-6541, Applications Manual for System Smoke Detectors, which provides detailed information on detector spacing, placement, zoning, wiring, and special applications. INSTALLATION The IDP-HEAT-W Series plug-in detectors use a separate base to simplify installation, service, and maintenance. Installation instructions are shipped with each detector. Mount base (all base types) on an electrical backbox which is at least 1.5" (3.81 cm) deep. NOTE: • Because of the inherent supervision provided by the SLC loop, end-of-line resistors are not required. Wiring “T-taps” or branches are permitted for Style 4 (Class “B”) wiring. • When using relay or sounder bases, consult the installation sheet for device limitations between isolator modules and isolator bases. ORDERING INFORMATION Note: Detectors must be mounted to one of the Intelligent Bases listed below. IDP-HEAT-W: White, low-profile intelligent 135°F fixed thermal sensor. Must be mounted to one of the bases listed below. IDP-HEAT-IV: Ivory, low-profile intelligent 135°F fixed thermal sensor. Must be mounted to one of the bases listed below. IDP-HEAT-ROR-W: White, low-profile intelligent rateof- rise thermal sensor. Must be mounted to one of the bases listed below. IDP-HEAT-ROR-IV: Same as IDP-HEAT- ROR-W, but in Ivory. IDP-HEAT-HT-W: White, low-profile intelligent 190°F fixed thermal sensor. Must be mounted to one of the bases listed below IDP-HEAT-HT-IV: Ivory, low-profile intelligent 190°F thermal sensor. Must be mounted to one of the bases listed below. INTELLIGENT BASES B300-6: White, standard flanged low-profile mounting base. B300-6-BP: Bulk pack of B300-6, package contains 10. B300-6-IV: Ivory, standard flanged low-profile mounting base. B501-WHITE: White, standard European flangeless mounting base. UL listed. B501-BL: Black, standard European flangeless mounting base. UL listed. B501-IV: Ivory, standard European flangeless mounting base. UL listed. B200S-WH: White, Intelligent, programmable sounder base. B200S-IV: Ivory, Intelligent, programmable sounder base. B200SR-WH: White, Intelligent sounder base for retrofit applications. B200SR-IV: Ivory, Intelligent sounder base for retrofit applications. B200S-LF-WH: White, Low Frequency Intelligent, programmable sounder base. B200S-LF-IV: Ivory, Low Frequency Intelligent, programmable sounder base. B200SR-LF-WH: White, Low Frequency Intelligent sounder base for retrofit applications. B200SR-LF-IV: Ivory, Low Frequency Intelligent sounder base for retrofit applications. B224RB-WH: White, plug-in System Sensor relay base. B224RB-IV: Ivory, plug-in System Sensor relay base. B224BI-WH: White, plug-in System Sensor isolator detector base. B224BI-IV: Ivory, plug-in System Sensor isolator detector base. ACCESSORIES TR300: White, replacement flange for B210LP and B300-6 bases. TR300-IV: Ivory, replacement flange for B210LP and B300-6 bases. RA100Z: Remote LED annunciator. 3 – 32 VDC. Mounts to a U.S. single-gang electrical box. For use with B501 and B300(A)-6 bases only. M02-04-00: Test magnet. M02-09-00: Test magnet with telescoping handle. CK300: White, detector color kit. Pack of 10. CK300-IV: Ivory, detector color kit. Pack of 10. CK300-BL: Black, detector color kit. Pack of 10. For a complete listing of all compliance approvals and certifications, please visit www.farenhyt.com. Microsoft, Windows, and the Windows Logo are registered trademarks or trademarks of Microsoft Corporation. Honeywell® and System Sensor® are registered trademark of and Farenhyt™ is a trademark of Honeywell International, Inc. This document is not intended to be used for installation purposes. We try to keep our product information up-to date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For Technical Support, Please call 800-446-6444. Farenhyt IDP-HEAT-W Series Technical Specifications PHYSICAL Height: 2.0" (51mm) installed in B300-6 base Diameter: 6.2" (156mm) installed in B300-6 base 4.1" (104 mm) installed in B501 base Weight: 3.4 oz (95 g) ENVIRONMENTAL Operating Temperature range: Thermal 135° F fixed: -4°F to 100°F (-20°C to 38°C) Thermal 135° F rate-of-rise: -4°F to 100°F (-20°C to 38°C) Thermal 190° F rate-of-rise: -4°F to 135°F (-20°C to 57°C)) Humidity: 10% to 93% non-condensing Rate-of-Rise Detection: Responds to greater than 15°F/minute or 135°F (8.3°C/minute or 57°C ELECTRICAL RATINGS Voltage Range: 15 to 32VDC Standby Current (@ 24 VDC): 200UA (one communication every 5 seconds with green LED enabled) Max Alarm Current (max.): 2mA @ 24VDC (one communication every 5 seconds with red LED enabled) Max Current (max.): 4.5mA @ 24VDC (one communication every 5 seconds with amber LED enabled) COMPATIBILITY The IDP-HEAT-W series detectors are compatible with the following Farenhyt Series FACPs: • IFP-2100 / IFP-2100ECS / RFP-2100 • IFP-2000 / IFP-2000ECS / RPS-2000 • IFP-1000 / IFP-1000ECS • IFP-300 / IFP-300ECS • IFP-100 / IFP-100ECS • IFP-75 • IFP-50 AGENCY LISTINGS AND APPROVALS For exact certification listings for each model, please reference the respective agency Web site. UL listed: S2101 FM approved CSFM: 7270-0559:0511 Doc 351630 | Rev A| 04/18 © 2018 Honeywell International Inc. For more information Learn more about Honeywell’s Farenhyt Series and other products available by visiting www.farenhyt.com Honeywell Farenhyt 12 Clintonville Road Northford, CT 06472 800-328-0103 FEATURES & BENEFITS • Isolates short circuits on an SLC loop • Protects the modules on the SLC loop so other devices continue to operate • Panel controlled status LED that flashes green in normal state and is solid red in alarm • Standard 4 inch electrical box mounting • SEMS screws for easy wiring • UL Listed • CSFM Listed • MEA Listed 427-91-E Vol. X IDP-MONITOR Addressable Monitor Module The IDP-MONITOR is an addressable monitor module for use with the Honeywell Farenhyt Series fire alarm control panels (FACPs). The IDP- MONITOR acts as an interface to contact devices, such as waterflow switches and pull stations. The IDP-MONITOR supports Class A supervised or Class B supervised wiring to the load device. Conventional 4-wire smoke detectors can be monitored for alarm and trouble conditions. INSTALLATION The IDP-MONITOR mounts directly into a 4” square electrical box. The box must have a minimum depth of 2-1/8”. A surface mount electrical box (System Sensor® PN SMB500) is available from Honeywell. COMPATIBILITY The IDP-MONITOR is compatible with the following Honeywell Farenhyt Series FACPs: • IFP-2100 / IFP-2100ECS / RFP-2100 • IFP-2000 / IFP-2000ECS / RPS-2000 • IFP-1000 / IFP-1000ECS • IFP-300 / IFP-300ECS • IFP-100 / IFP-100ECS • IFP-75 • IFP-50 IDP-MONITOR For a complete listing of all compliance approvals and certifications, please visit www.farenhyt.com. Microsoft, Windows, and the Windows Logo are registered trademarks or trademarks of Microsoft Corporation. Honeywell® and System Sensor® are registered trademarks of and Farenhyt™ is a trademark of Honeywell International, Inc. This document is not intended to be used for installation purposes. We try to keep our product information up-to date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For Technical Support, Please call 800-446-6444. IDP-MONITOR Technical Specifications PHYSICAL 4.5" H x 4" W x 1.25 D ( 11.4 x 10.2 x 3cm) Shipping Weight: 6.3oz (196g? ELECTRICAL RATINGS Operating Voltage: 15 – 32VDC Current Draw (LED on): 5.0mA max Operating Current (LED flashing): 375μA Standby Current: 400 μA max @ 24 VDC (one communication every 5 sec with 47K EOL); 550 μA max @ 24 VDC (one communication every 5 sec with EOL <1K) 5.5 mA (with LED latched on) LED Current: 5.5 mA (with LED latched on) End-of-Line Resistance: 47K W Initiating Device Circuit Wiring Resistance: 1,500 W max SLC Loop Resistance: 40 W max. ENVIRONMENTAL Operating Temperature: 32º-120ºF (0ºC – 49ºC) Humidity: 10 to 93% non-condensing) ORDERING INFORMATION IDP-MONITOR: Monitoring Module ACCESSORIES SMB500: 4” Square surface mount electrical box Doc 350288 | Rev K| 11/17 © 2017 Honeywell International Inc. For more information Learn more about Honeywell’s Farenhyt Series and other products available by visiting www.farenhyt.com Honeywell Security & Fire 12 Clintonville Road Northford, CT 06472 800-328-0103 FEATURES & BENEFITS • New modern profile for improved aesthetics • Stable communication technique with noise immunity • Low standby current • Two-wire SLC connection • Optional remote, single- gang LED accessory • Dual LED design provides 360° viewing angle • Remote test feature from the panel • Built-in functional test switch activated by external magnet • Built-in tamper- resistant feature • Sealed against back pressure • Expanded color options • SEMS screws for wiring of the separate base • Optional relay, isolator, and sounder bases • Plugs into separate base for ease of installation and maintenance Farenhyt IDP-PHOTO-W Series Intelligent Plug-in Photoelectric Smoke Detectors Honeywell’s IDP-PHOTO-W Series intelligent plug-in smoke detectors are designed for both performance and aesthetics. A new modern, sleek, contemporary design and enhanced optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. The IDP-PHOTO-W Series detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector’s address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level. Dual electronic thermistors add 135°F (57°C) fixed temperature thermal sensing on the IDP-PHOTO-T. The IDP-PHOTO-R is a remote test capable detector for use with DNR Series duct detector housings IDP-PHOTO-W in B300-6 base DETECTOR SPACING AND APPLICATIONS Honeywell recommends spacing detectors in compliance with NFPA 72. In low airflow applications with smooth ceiling, space detectors 30 feet (9m). For specific information regarding detector spacing, placement, and special applications refer to NFPA 72. System Smoke Detector Application Guide, document A05-1003, is available at systemsensor.com INSTALLATION The IDP-PHOTO-W Series plug-in detectors use a separate base to simplify installation, service, and maintenance. Installation instructions are shipped with each detector. Mount base (all base types) on an electrical backbox which is at least 1.5" (3.81 cm) deep. NOTE: • Because of the inherent supervision provided by the SLC loop, end-of-line resistors are not required. Wiring “T-taps” or branches are permitted for Style 4 (Class “B”) wiring. • When using relay or sounder bases, consult the installation sheet for device limitations between isolator modules and isolator bases. ORDERING INFORMATION NOTE: Detectors must be mounted to one of the Intelligent Bases listed below IDP-PHOTO-W: White, low-profile intelligent photoelectric sensor. IDP-PHOTO-IV: Ivory, low-profile intelligent photoelectric sensor. IDP-PHOTO-T-W: White, same as the IDP-PHOTO-W, but includes a built-in 135°F (57°C) fixed-temperature thermal device. IDP-PHOTO-T-IV: Same as IDP- PHOTO-T but in Ivory. IDP-PHOTO-R-W: White, low-profile intelligent photoelectric sensor, remote test capable. For use with DNR/DNRW.. IDP-PHOTO-R-IV: Ivory, low-profile intelligent photoelectric sensor, remote test capable. For use with DNR/DNRW. INTELLIGENT BASES B300-6: White, standard flanged low-profile mounting base. B300-6-BP: Bulk pack of B300-6, package contains 10. B300-6-IV: Ivory, standard flanged low-profile mounting base. B501-WHITE: White, standard European flangeless mounting base. UL listed. B501-BL: Black, standard European flangeless mounting base. UL listed. B501-IV: Ivory, standard European flangeless mounting base. UL listed. B200S-WH: White, Intelligent, programmable sounder base. B200S-IV: Ivory, Intelligent, programmable sounder base. B200SR-WH: White, Intelligent sounder base for retrofit applications. B200SR-IV: Ivory, Intelligent sounder base for retrofit applications. B200S-LF-WH: White, Low Frequency Intelligent, programmable sounder base. B200S-LF-IV: Ivory, Low Frequency Intelligent, programmable sounder base. B200SR-LF: White, Low Frequency Intelligent sounder base for retrofit applications. B200SR-LF-IV: Ivory, Low Frequency Intelligent sounder base for retrofit applications. B224RB-WH: White, plug-in System Sensor relay base. B224RB-IV: Ivory, plug-in System Sensor relay base. B224BI-WH: White, plug-in System Sensor isolator detector base. B224BI-IV: Ivory, plug-in System Sensor isolator detector base. ACCESSORIES TR300: White, replacement flange for B210LP and B300-6 bases. TR300-IV: Ivory, replacement flange for B210LP and B300-6 bases. RA100Z: Remote LED annunciator. 3 – 32 VDC. Mounts to a U.S. single-gang electrical box. For use with B501 and B300(A)-6 bases only. M02-04-00: Test magnet. M02-09-00: Test magnet with telescoping handle. CK300: White, detector color kit. Pack of 10. CK300-IV: Ivory, detector color kit. Pack of 10. CK300-BL: Black, detector color kit. Pack of 10. For a complete listing of all compliance approvals and certifications, please visit www.farenhyt.com. Microsoft, Windows, and the Windows Logo are registered trademarks or trademarks of Microsoft Corporation. Honeywell® and System Sensor® are registered trademark of and Farenhyt™ is a trademark of Honeywell International, Inc. This document is not intended to be used for installation purposes. We try to keep our product information up-to date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For Technical Support, Please call 800-446-6444. Farenhyt IDP-PHOTO-W Series Technical Specifications PHYSICAL Height: 2.0" (51mm) installed in B300-6 base Diameter: 6.2" (156mm) installed in B300-6 base 4.1" (104 mm) installed in B501 base Weight: 3.4 oz (95 g) ENVIRONMENTAL Operating Temperature range: Photo: 32°F to 122°F (0°C to 50°C) Photo with Thermal: 32°F to 100°F (0°C to 38°C) Thermal Ratings: Fixed Temperature Set point: 135°F (57°C) Sensitivity: UL Applications: 0.5% to 4.0% per foot obscuration. ELECTRICAL RATINGS Voltage Range: 15 to 32VDC peak Operating Current @ 24VDC: 200µA (one communication every 5 seconds with green LED blink on communication) Maximum Current: 4.5mA @ 24VDC (one communication every 5 seconds with amber LED solid on). COMPATIBILITY The IDP-PHOTO-W series detectors are compatible with the following Farenhyt Series FACPs: • IFP-2100 / IFP-2100ECS / RFP-2100 • IFP-2000 / IFP-2000ECS / RPS-2000 • IFP-1000 / IFP-1000ECS • IFP-300 / IFP-300ECS • IFP-100 / IFP-100ECS • IFP-75 • IFP-50 AGENCY LISTINGS AND APPROVALS For exact certification listings for each model, please reference the respective agency Web site. UL listed: S6173 FM approved CSFM: 7272-0559:0512 Doc 351629 | Rev A| 04/18 © 2018 Honeywell International Inc. For more information Learn more about Honeywell’s Farenhyt Series and other products available by visiting www.farenhyt.com Honeywell Farenhyt 12 Clintonville Road Northford, CT 06472 800-328-0103 FEATURES & BENEFITS • Installer can open station without causing an alarm condition • Dual-color LED is visible through handle of station blinks green to indicate normal operation and remains steady red in an alarm condition • Key operated test and reset lock using lock plate actuator • Key matches compatible FACP locks • Meets ADA requirement for 5 lbs maximum pull force to active • Meets the Americans with Disabilities Act Accessibility Guidelines (ADAAG) controls and operating mechanisms guidelines (Section 4.1.3[13]) • Shell, door, and handle molded from durable LEXAN® • Reliable analog communications for trouble-free operation • Braille text on station handle • Rotary address switches for fast installation • Handle latches in down position and the word Activated appears, clearly indicating the station has been pulled • UL Listed, including UL 38, Standard of Manually Actuated Signaling System • CSFM Listed • MEA Listed IDP-PULL-SA / IDP-PULL-DA Addressable Single Action and Dual Action Pull Stations The IDP-PULL-SA is a single action pull station requiring only one motion to activate the station. The IDP-PULL-DA is a dual action pull station requiring two motions to active the station. Both pull stations are designed to work with Honeywell Farenhyt series fire alarm control panels (FACPs). INSTALLATION The IDP-PULL-SA and IDP-PULL-DA can be surface mounted to an SB-I/O surface back box or semi-flush mounted on a standard single-gang with a minimum depth of 2.13”(5.40 cm) or double gang or 4” (10.61 cm) square electrical box. You can also use the optional (System Sensor® PN BG-TR) trim ring if the station is being semi-flush mounted. COMPATIBILITY The IDP-PULL-SA and IDP-PULL-DA are compatible with the following Honeywell Farenhyt Series FACPs: • IFP-2100 / IFP-2100ECS / RFP-2100 • IFP-2000 / IFP-2000ECS / RPS-2000 • IFP-1000 / IFP-1000ECS • IFP-300 / IFP-300ECS • IFP-100 / IFP-100ECS • IFP-75 • IFP-50 IDP-PULL-SA IDP-PULL-DA For a complete listing of all compliance approvals and certifications, please visit www.farenhyt.com. Microsoft, Windows, and the Windows Logo are registered trademarks or trademarks of Microsoft Corporation. Honeywell® and System Sensor® are registered trademarks of and Farenhyt™ is a trademark of Honeywell International, Inc. This document is not intended to be used for installation purposes. We try to keep our product information up-to date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For Technical Support, Please call 800-446-6444. IDP-PULL-SA and IDP-PULL-DA Technical Specifications SPECIFICATIONS* Physical: 5.5" H x 4" D ( 14cm x 10.2cm) Shipping Weight: 5.4oz Housing Material: LEXAN polycarbonate resin Bi-Colored LED: Blinking Green: Normal Steady Red: Alarm Switch: Single pole, single throw (SPST) normally open (N/O) switch which closes upon activation of the pull station ELECTRICAL RATINGS Operating Voltage: 15 – 32VDC SLC Standby and Alarm Current: 350μA Wire Gauge: Up to 12AWG (3.1 mm2) ENVIRONMENTAL Operating Temperature: 32º-120ºF (0ºC – 49ºC) Humidity: 10 to 93% non-condensing) ORDERING INFORMATION IDP-Pull-SA: Single Action Pull Station IDP-Pull-DA: Dual Action Pull Station ACCESSORIES BG-TR: Optional trim ring. SB-I/O: Surface backbox, indoor/outdoor. * Unless otherwise noted, specifications apply to IDP-Pull-SA and IDP-Pull-DA Doc 350286 | Rev H | 11/17 © 2017 Honeywell International Inc. For more information Learn more about Honeywell’s Farenhyt Series and other products available by visiting www.farenhyt.com Honeywell Security & Fire 12 Clintonville Road Northford, CT 06472 800-328-0103 FEATURES & BENEFITS • Two sets of Form C contacts • Contacts are rated for a variety of amps (see Specifications) • Panel controlled status LED that flashes green in normal state and is solid red in alarm • Relay programming is completely flexible– can be mapped to zone conditions • Polling LED visible through the cover plate • Rotary address switches for fast installation • SEMS screws for easy wiring • UL Listed • CSFM Listed • MEA Listed 386-02-E Vol. II IDP-RELAY Addressable Relay Module The IDP-RELAY is an addressable relay module for use with the Honeywell Farenhyt Series fire alarm control panels (FACPs). The IDP-RELAY allows a Farehyt FACP to switch discrete contacts by code command. The relay contains two isolated sets of Form C contacts, which operate as a DPDT switch. No supervision is provided for the notification appliance circuit. The IDP-RELAY contacts can be used for virtually any normally open or normally closed application. Each IDP-RELAY is programmed with a unique signaling line circuit (SLC) loop address. When an event occurs that controls the IDP-RELAY, the relay is triggered by the FACP. INSTALLATION The IDP-RELAY mounts directly into a 4” square electrical box. The box must have a minimum depth of 2-1/8”. A surface mount electrical box (System Sensor® PN SMB500) is available from Honeywell. COMPATIBILITY The IDP-RELAY is compatible with the following Farenhyt Series FACPs: • IFP-2100 / IFP-2100ECS / RFP-2100 • IFP-2000 / IFP-2000ECS / RPS-2000 • IFP-1000 / IFP-1000ECS • IFP-300 / IFP-300ECS • IFP-100 / IFP-100ECS • IFP-75 • IFP-50 IDP-RELAY For a complete listing of all compliance approvals and certifications, please visit www.farenhyt.com. Microsoft, Windows, and the Windows Logo are registered trademarks or trademarks of Microsoft Corporation. Honeywell® and System Sensor® are registered trademarks of and Farenhyt™ is a trademark of Honeywell International, Inc. This document is not intended to be used for installation purposes. We try to keep our product information up-to date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For Technical Support, Please call 800-446-6444. IDP-RELAY Technical Specifications SPECIFICATIONS* Physical: 4.275" H x 4".675 W x 1.4 D Shipping Weight: 6.3oz (196g) ELECTRICAL RATINGS Operating Voltage: 15 to 32VDC Standby Current: 300μA max @ 24VDC (one communication every 5 sec. with LED enabled) LED Current: 5.5 mA (with LED latched on) Relay Contact Ratings: 2.0A @ 25VAC (PF=.35), non-coded 3.0A @ 30VDC resistive, non-coded 2.0A @ 30VDC resistive, coded 0.46A @ 30VDC (L/R=20ms), non-coded 0.7A @ 70.7VAC (PF=.35), non-coded 0.9A @ 125VDC resistive, non-coded 0.5A @ 125VAC (PF=.75), non-coded 0.3A @ 125VAC (PF=.35), non-coded ENVIRONMENTAL Operating Temperature: 32º-120ºF (0ºC – 49ºC) Humidity: 10 to 93% non-condensing) ORDERING INFORMATION IDP-RELAY: Relay Module ACCESSORIES SMB500: 4” Square Surface Mount Electrical Box CB500: Module Barrier. Used to separate power limited and non-power limited wiring in a junction box. Doc 350290 | Rev K | 12/17 © 2017 Honeywell International Inc. For more information Learn more about Honeywell’s Farenhyt Series and other products available by visiting www.farenhyt.com Honeywell Security & Fire 12 Clintonville Road Northford, CT 06472 800-328-0103 L-SERIES LOW FREQUENCY Indoor Selectable Low Frequency Sounders and Sounder Strobes The L-Series offers the most versatile and easy-to-use line of low frequency sounder and low frequency sounder strobes in the industry. With white and red plastic housings, listed for wall and ceiling mounting, L-Series Low Frequency can meet virtually any application requirement. The low frequency sounder and low frequency sounder strobes were designed to address the NFPA 72 sleeping space requirements that require a low frequency notification appliance that operates within frequency range of 520 Hz ± 10% and is of a square wave tone. Like the entire L-Series product line they include a variety of features that increase their application versatility while simplifying installation. All devices feature plug-in designs with minimal intrusion into the back box, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults. To further simplify installation and protect devices from construction damage, L-Series uses a universal mounting plate with an onboard shorting spring, so installers can test wiring continuity before the device is installed. Installers can also easily adapt devices to a suit a wide range of application requirements using field-selectable candela settings, 24-volt operation, and a rotary switch for 520 Hz low frequency sounder tones. Low-frequency models include: • Wall-mount sounder strobes: P2RL-LF, P2WL-LF • Wall-mount sounders: HRL-LF, HWL-LF • Ceiling-mount sounders: HCRL-LF, HCWL-LF • Compact ceiling-mount sounders: HGRL-LF, HGWL-LF FEATURES AND BENEFITS • 520 Hz ± 10% square wave tone, NFPA compliance • Full candela range plus High/Low tone options to optimize current draw for a wide variety of applications • Compact, standard, and round ceiling options • Field-selectable candela settings on wall units: 15, 30, 75, 95, 110, 135, and 185 • Rotary switch for High and Low, Temp 3 and Temp 4 settings • Plug-in design with minimal intrusion into the back box • Mounting plate shorting spring checks wiring continuity before device installation • Electrically compatible with legacy SpectrAlert and SpectrAlert Advance devices, and provides a direct replacement for HW/R-LF and P2R/WH-LF • Compatible with MDL3 sync module • Sounders listed for ceiling and wall mounting • Sounder Strobe listed for wall mounting • Updated modern aesthetics L-Series audible visible notification products have features to maximize profits with lower current draw and modern aesthetics. Page 2 of 4 — FH-62014:B • 10/2/2019 ARCHITECT/ENGINEER SPECIFICATIONS General L-Series low frequency sounder and low frequency sounder strobes shall mount to a standard 4 × 4 × 1.5-inch back box, 4-inch octagon back box, or double-gang back box. Two-wire products shall also mount to a single-gang 2 × 4 × 17/8-inch back box. A universal mounting plate shall be used for mounting products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, L-Series products, when used with the Sync•Circuit. Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 24-volt- rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Indoor L-Series products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC or full-wave rectified unfiltered power supply. Low Frequency Sounder strobes shall have field-selectable candela settings including 15, 30, 75, 95, 110, 135, 185. The field selectable tones will sound within the frequency range of 520 Hz ±10% square wave tone and have a permanent marking on the housing that reads “low frequency sounder”. Low Frequency Sounder The low frequency sounder shall be a System Sensor L-Series Model _______ listed to UL 464 and shall be approved for fire protective service. The low frequency sounder and the Sync•Circuit. MDL3 Module accessory, if used, shall be powered from a notification appliance circuit output and shall operate on a nominal 24 volts (includes fire alarm panels with built in sync). When used with the Sync•Circuit Module MDL3, 24-volt rated notification appliance circuit outputs shall operate between 16.5 to 33 volts. If the notification appliances are not UL 9th edition listed with the corresponding panel or power supply being used, then refer to the compatibility listing of the panel to determine maximum devices on a circuit. The low frequency sounder has an option to switch between temporal three or temporal four pattern, non-temporal (continuous) pattern and coded supply within the frequency range of 520Hz ± 10% square wave tone. The low frequency sounder shall operate on a coded or non-coded power supply with high and low volume settings. Low Frequency Sounder Strobe Combination The low frequency sounder strobe shall be a System Sensor L-Series Model _______ listed to UL 1971 and UL 464 and shall be approved for fire protective service. The low frequency sounder strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The sounder shall have an option to switch between a temporal three or temporal four pattern and a non-temporal (continuous) pattern. These options are set by a multiple position switch. The low frequency sounder on low frequency sounder strobe models shall operate on a non-coded power supply with high and low volume settings. The field selectable tones will sound within the frequency range of 520 Hz ± 10% square wave tone. Synchronization Module The module shall be a System Sensor Sync•Circuit model MDL3 listed to UL 464 and shall be approved for fire protective service. The module shall synchronize SpectrAlert strobes at 1 Hz and low frequency sounder at temporal three. Also, while operating the strobes, the module shall silence the low frequency sounder on low frequency sounder strobe models over a single pair of wires. The module shall mount to a 411/16 × 411/16 × 21/8-inch back box. The module shall also control two Class B circuits or one Class A circuit. The module shall synchronize multiple zones. Daisy chaining two or more synchronization modules together will synchronize all the zones they control. The module shall not operate on a coded power supply. PHYSICAL/ELECTRICAL SPECIFICATIONS • Standard Operating Temperature: 32°F to 120°F (0°C to 49°C) • Humidity Range: 10 to 93% non-condensing •Frequency Range: 520 Hz ± 10% • Strobe Flash Rate: 1 flash per second • Nominal Voltage Low Frequency Sounder: Regulated 24 DC/FWR1 • Nominal Voltage Range Low Frequency Sounder Strobe: Regulated 24 VDC/FWR1 • Operating Voltage Range: 16 to 33 V (24 V nominal) • Operating Voltage Range MDL3 Sync Module: 16.5 to 33 V (24 V nominal) • Input Terminal Wire Gauge: 12 to 18 AWG Dimensions • Wall Sounder Strobe Dimensions (including lens): 5.6" L x 4.7" W x 1.9" D (142 mm L x 119 mm W x 49 mm D) • Standard Wall Sounder Dimensions: 5.6" L × 4.7" W × 1.5" D (142 mm L × 119 mm W × 38 mm D) • Compact Wall Sounder Dimensions: 5.25" L x 3.46" W x 1.5" D (133mm L x 88mm W x 38mm D) • Ceiling Sounder Dimensions: 6.8" diameter x 1.4" high (173mm diameter x 36mm high) • Standard Wall Sounder with SBBRL/SBBWL Surface Mount Back Box: 5.7" L x 4.8" W x 3.3" D (145 mm L x 120 mm W x 87 mm D) • Compact Wall Sounder with SBBGRL/SBBGWL Surface Mount Back Box: 5.4" L x 3.6" W x 3.0" D (137 mmL x 91mm W x 76 mm D) • Low Frequency Ceiling Sounder with SBBCRL/SBBCWL Surface Mount Back Box: 6.9" diameter x 3.9" high (175mm diameter x 99mm high) Notes: 1. Full Wave Rectified (FWR) voltage is a non-regulated, time- varying power source that is used on some power supply and panel outputs. Page 3 of 4 — FH-62014:B • 10/2/2019 UL CURRENT DRAW AND SOUND OUTPUT DATA Low Frequency Wall Sounder Strobe Current Draw (mA) and Sound Output (dBA) Pos Tone Volume Setting Current Draw (mA) Sound Output (dBA) 16-33 VDC 16-33 FWR 16-33 V 15cd 30cd 75cd 95cd 110cd 135cd 185cd 15cd 30cd 75cd 95cd 110cd 135cd 185cd DC FWR 1 Temporal 3 High 98 115 158 173 182 212 266 136 153 188 206 228 258 304 80 80 2 Temporal 3 Low 98 102 141 162 173 202 255 150 150 176 194 216 242 280 76 76 3 Temporal 4 High 98 108 137 151 178 202 252 200 198 169 188 212 242 290 80 80 4 Temporal 4 Low 102 104 122 136 163 187 237 176 174 154 173 197 227 275 76 76 5 Continuous High 141 158 198 216 234 264 305 190 207 249 268 289 321 368 80 80 6 Continuous Low 120 128 179 196 215 244 285 165 182 226 244 266 297 342 76 76 UL Max. Low Frequency Sounder Current Draw (mA RMS) Pos Tone Volume Setting Current Draw (mA)Sound Output (dBA) Reverberant 16–33 Volts 16–33 Volts DC FWR DC FWR 1 Temporal 3 High 108 150 80 80 2 Temporal 3 Low 78 76 76 76 3 Temporal 4 High 111 151 80 80 4 Temporal 4 Low 80 76 76 76 5 Continuous High 111 151 80 80 6 Continuous Low 80 76 76 76 7 Coded High 111 151 80 80 8Coded Low 80 76 76 76 *NOTE: For coded tones, temporal coding must be provided by the NAC. If the NAC voltage is held constant, the sounder output will remain constantly on. Coded ratings provided are for continuous voltage. FH-62014 | B | 10/19 ©2019 Honeywell International Inc. Honeywell Fire Solutions 12 Clintonville Road Northford, CT 06472-1610 203.484.7161 www.farenhyt.com Farenhyt® and System Sensor® are registered trademarks of and Sync•Circuit™ is a trademark of Honeywell International Inc. ©2019. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. Country of origin: Mexico AGENCY LISTINGS AND APPROVALS These listings and approvals apply to the modules specified in this document. In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in process. Consult the factory for the latest listing status. UL Listed: S4011 FM Approved: PR452768 CSFM: —Horns only: 7135-1653:0516 —Horn/Strobes: 7125-1653:0517 ORDERING INFORMATION P2RL-LF: Low-frequency sounder strobe, wall, red P2WL-LF: Low frequency sounder strobe, wall, white HRL-LF†: Low frequency sounder, wall, red HWL-LF†: Low frequency sounder, wall, white HGRL-LF†: Compact low frequency sounder, wall, red HGWL-LF†: Compact low frequency sounder, wall, white HCRL-LF: Low frequency sounder, ceiling, red HCWL-LF: Low frequency sounder, ceiling, white †Add -BP10 to order bulk pack of 10 units Accessories SBBRL: Surface mount back box, wall, red SBBWL: Surface mount back box, wall, white SBBCRL: Surface mount back box, ceiling, red SBBCWL: Surface mount back box, ceiling, white SBBGRL: Compact surface mount back box, wall, red SBBGWL: Compact surface mount back box, wall, white Agency Listings S2522 3034401 7300-1653:02127300-1653:02117135-1653:0196 9080301 Duct Smoke Detector Accessories Expand the versatility of the InnovairFlex™ line of duct smoke detectors with System Sensor notification and test accessories. Available Accessories APA151 Piezo Annunciator MHR Mini-Horn, Red MHW Mini-Horn, White RA100Z/RA100ZA Remote Annunciator RTS151 Remote Test Station RTS151KEY Remote Test Station with Key RTS2 Multi-Signaling Accessory AOS Add-On Strobe RTS2-AOS Multi-Signaling Accessory Duct smoke detector accessories add functionality to the duct smoke detection system by allowing quick, convenient inspections at eye level and effective audible and visible notification options. All System Sensor duct smoke detectors and accessories are UL listed. The APA151 piezo annunciator, which replaces the APA451 with a new, improved look, provides an audible alarm signal, a red LED to indicate alarm status, and a green LED to indicate power status. It is intended for use with System Sensor 4-wire conventional duct smoke detector applications without a system control panel, to comply with NFPA 90A. The MHR and MHW SpectrAlert® Advance mini-horns feature temporal or continuous tones at high and low volume settings. Their small footprint allows mounting to single-gang back boxes for applications where a small device is desired. The RA100Z and RA100ZA remote annunciators are designed for both conventional and intelligent applications. Their red LED provides visual indication of an alarm condition. The RTS151 and RTS151KEY remote test stations are automatic fire detector accessories designed to test duct smoke detectors from a convenient location. For 4-wire detectors, the RTS151KEY test station features a multi-colored LED that alternates between steady green and red. For 2-wire detectors, the LED illuminates red for alarm. The RTS2 and RTS2-AOS multi-signaling accessories are designed to work with InnovairFlex 4-wire conventional duct smoke detectors. These accessories include a key switch that can be used to select one of two connected sensors to be tested, reset, or both by a push button switch. They also enable sensitivity measurements using the SENS-RDR sensitivity reader (sold separately). The AOS (Add-On Strobe) is an optional accessory included with the RTS2- AOS model. 3825 Ohio Avenue • St. Charles, IL 60174 Phone: 800-SENSOR2 • Fax: 630-377-6495 www.systemsensor.com ©2013 System Sensor. Product specifications subject to change without notice. Visit systemsensor.com for current product information, including the latest version of this data sheet. HVDS20202 • 8/13 APA151 Piezo Annunciator Voltage Regulated 24 VDC Operating Voltage 16 to 33 VDC Maximum Alarm Current 30 mA Temperature Range 0°C to 49°C (32°F to 120°F) Relative Humidity 10 to 93% non-condensing Wire Gauge 12 to 18 AWG Dimensions 4.6˝ H × 2.9˝ W × .45˝ D MHR/MHW SpectrAlert® Advance Mini-Horns Voltage Regulated 12 DC or FWR (Full Wave Rectified) or Regulated 24 VDC or FWR Sounder Current Draw 22 mA RMS max. at 8 to 17.5 Volts DC 29 mA RMS max. at 16 to 33 Volts DC Temperature Range 0°C to 49°C (32°F to 120°F) Humidity Range 10 to 93% non-condensing Nominal Sounder Frequency 3 kHz Wire Gauge 12 to 18 AWG Dimensions 4.6˝ H × 2.9˝ W × 0.45˝ D RA100Z/RA100ZA Remote Annunciator Voltage Range Conventional System: 3.1 to 32 VDC Intelligent System: 18 to 32 VDC Maximum Alarm Current 10 mA Dimensions 4.6 ˝ H × 2.8˝ W × 1.3˝ D Specifications, Duct Smoke Detector Accessories RTS151 Remote Test Station Power Requirements Alarm LED: 2.8 to 32 VDC, 12 mA max. Total Current: 105 mA max. Test Switch 10 VA @ 32 VDC Reset Switch 10 VA @ 32 VDC Alarm Response Time 40 seconds max. Temperature Range –10°C to 60°C (14°F to 140°F) Relative Humidity 95% non-condensing Wire Gauge 14 to 18 AWG Dimensions 4.8˝ H x 2.90˝ W x 1.4˝ D RTS151KEY Remote Test Station with Key Power Requirements Power LED (Green): 14 to 35 VDC, 12 mA max. Alarm LED (Red): 2.8 to 32 VDC, 12 mA max. Total Current: 105 mA max. Alarm Response Time 40 seconds max. Temperature Range –10°C to 60°C (14°F to 140°F) Relative Humidity 95% non-condensing Wire Gauge 14 to 18 AWG Dimensions 4.6˝ H × 2.75˝ W × 1.8˝ D RTS2 and RTS2-AOS Multi-signaling Accessory Voltage 20 to 29 VDC Power Requirements Standby: 3.0 mA max. Trouble: 16.0 mA max. Alarm without strobe: 30 mA max. Alarm with strobe: 55 mA max. Sounder 85 dBA at ten feet Temperature Range –10°C to 60°C (14°F to 140°F) Relative Humidity 95% non-condensing Wire Gauge 14 to 22 AWG Dimensions 4.8˝ W x 5.3˝ H x 1.6˝ D For the very latest product specifications and listing information, please visit the System Sensor Web site at www.systemsensor.com. RTS151 UL S4011 RA100Z UL S2522 RTS151KEY UL S2522 MHW UL S4011 MHR UL S4011 APA151 UL S4011 RTS2-AOS UL S2522 AOS FEATURES & BENEFITS • Updated Modern Aesthetics • Offers small profile devices for horns and horn strobes • Color lens attachments for use with clear lens wall or ceiling strobe • Designed with tamper-resistant construction • Meets DoD specification requirements • Features a plug-in design with minimal intrusion into the back box • Horn rated at 88+ dBA at 16 volts • Supports rotary switch for horn tone and two volume selections • Automatic selection of 12- or 24-volt operation at 15 and 30 candela • Uses field-selectable candela settings on wall units: 15, 30, 75, 95, 110, 135, 185 • Mounting plate for all standard and all compact wall units • Mounting plate shorting spring checks wiring continuity before device installation • Supports electrically compatible with existing SpectrAlert and SpectAlert Advance devices • Compatible with System Sensor synchronization protocol • Listed for wall mounting only L-Series Indoor Horns, Strobes, and Horn Strobes The L-Series audible visible notification products offers the most versatile and easy-to-use line of horns, strobes, and horn strobes in the industry with lower current draws and modern aesthetics. With white and red plastic housings, standard and compact devices, and plain, FIRE, and FUEGO-printed devices, System Sensor L-Series can meet virtually any application requirement. The L-Series line of wall-mount horns, strobes, and horn strobes include a variety of features that increase their application versatility while simplifying installation. All devices feature plug-in designs with minimal intrusion into the back box, making installations fast and foolproof while virtually eliminating costly and time-consuming ground faults. To further simplify installation and protect devices from construction damage, the L-Series utilizes a universal mounting plate for all models with an onboard shorting spring, so installers can test wiring continuity before the device is installed. Installers can also easily adapt devices to a suit a wide range of application requirements using field-selectable candela settings, automatic selection of 12- or 24-volt operation, and a rotary switch for horn tones with two volume selections. INDOOR SELECTABLE-OUTPUT HORNS, STROBES, AND HORN STROBES FOR WALL APPLICATIONS L-SERIES SPECIFICATIONS ARCHITECT/ENGINEER SPECIFICATIONS GENERAL L-Series standard horns, strobes, and horn strobes shall mount to a standard 2 x 4 x 1 7/8-inch back box, 4 × 4 × 1½-inch back box, 4-inch octagon back box, or double-gang back box. L-Series compact products shall mount to a single-gang 2 × 4 × 1 7⁄8-inch back box. A universal mounting plate shall be used for mounting ceiling and wall products for all standard models and a separate universal mounting plate shall be used for mounting wall compact models. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, L-Series products, when used with the Sync•Circuit™ Module accessory, shall be powered from a non- coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt-rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Indoor L-Series products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC or full-wave rectified unfiltered power supply. Strobes and horn strobes shall have field-selectable candela settings including 15, 30, 75, 95, 110, 135, and 185. STROBE The strobe shall be a System Sensor L-Series Model _______ listed to UL 1971 and shall be approved for fire protective service. The strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. HORN STROBE COMBINATION The horn strobe shall be a System Sensor L-Series Model _______ listed to UL 1971 and UL 464 and shall be approved for fire protective service. The horn strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have two audibility options and an option to switch between a temporal three pattern and a non-temporal (continuous) pattern. These options are set by a multiple position switch. The horn on horn strobe models shall operate on a coded or non-coded power supply. SYNCHRONIZATION MODULE The module shall be a System Sensor Sync•Circuit model MD L3 listed to UL 464 and shall be approved for fire protective service. The module shall synchronize L-Series strobes at 1 Hz and horns at temporal three. Also, while operating the strobes, the module shall silence the horns on horn strobe models over a single pair of wires. The module shall mount to a 4 11⁄16 × 4 11⁄16 × 2 1⁄8-inch back box. The module shall also control two Style Y (class B) circuits or one Style Z (class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more synchronization modules together will synchronize all the zones they control. The module shall not operate on a coded power supply. PHYSICAL Wall-Mount Dimensions (including lens) : 5.6˝ L × 4.7˝ W × 1.25˝ D (143 mm L × 119 mm W × 32 mm D) Compact Wall-Mount Dimensions (including lens): 5.26” L x 3.46” W x 1.93” D (133 mm L x 88 mm W x 49 mm D) Horn Dimensions : 5.6˝ L × 4.7˝ W × 1.25˝ D (143 mm L × 119 mm W × 32 mm D) Compact Horn Dimensions: 5.25” L x 3.45” W x 1.25” D (133mm L x 88mm W x 32mm D) ELECTRICAL SPECIFICATIONS Strobe Flash Rate: 1 flash per second Nominal Voltage Regulated: 12VDC or regulated 24DC/FWR1 Operating Voltage Range2: 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal) Operating Voltage Range (MDL3) Sync Module: 8.5 to 17.5V (12 V nominal) or 16.5 to 33 V (24V nominal) Input Terminal Wire Gauge: 12 to 18 AWG ENVIRONMENTAL Standard Operating Temperature: 32°F to 120°F (0°C to 49°C) Humidity Range: 10 to 93% non-condensing Notes: 1. Full Wave Rectifi ed (FWR) voltage is a non-regulated, time-varying power source that is used on some power supply and panel outputs. 2. P, S, PC, and SC products will operate at 12 V nominal only for 15 and 30 cd. AGENCY LISTINGS AND APPROVALS UL: Listed FM: Approved CSFM: Listed UL MAX HORN CURRENT DRAW ( mA RMS) SOUND PATTERN DB 8-17.5V 16-33V DC DC FWR Temporal High 39 44 54 Temporal Low 28 32 54 Non-Temporal High 43 47 54 Non-Temporal Low 29 32 54 Non-Temporal Low 29 32 54 3.1 KHz Temporal High 39 41 54 3.1 KHz Temporal Low 29 32 54 3.1 KHz Non-Temporal High 42 43 54 3.1 KHz Non-Temporal Low 28 29 54 Coded High 43 47 54 3.1 KHz Coded High 42 43 54 UL MAX CURRENT DRAW (mA RMS), 2-WIRE HORN STROBE, CANDELA RANGE (15-115 CD) 8-17.5V 16-33V DC INPUT 15CD 30CD 15CD 30CD 75CD 95CD 110CD 135CD 185CD EM Temp Hi 98 158 54 74 121 142 162 196 245 EM Temp Low 93 154 44 65 111 133 157 184 235 EM Cont Hi 106 166 73 94 139 160 182 211 262 EM Cont Low 93 156 51 71 119 139 162 190 239 3.1K Temp Hi 93 156 53 73 119 140 164 190 242 3.1K Temp Low 91 154 45 66 112 133 160 185 235 3.1K Cont Hi 99 162 69 90 135 157 175 208 261 3.1K Cont Low 93 156 52 72 119 138 162 192 242 16VFWR SWITCH POSITION 15CD 30CD 75CD 95CD 110CD 135CD 185CD EM Temp Hi 83 107 156 177 198 234 287 EM Temp Low 68 91 145 165 185 223 271 EM Cont Hi 111 135 185 207 230 264 316 EM Cont Low 79 104 157 175 197 235 283 3.1K Temp Hi 81 105 155 177 196 234 284 3.1K Temp Low 68 90 145 166 186 222 276 3.1K Cont Hi 104 131 177 204 230 264 326 3.1K Cont Low 77 102 156 177 199 234 291 HORN AND HORN STROBE OUTPUT (DBA) 8-17.5V 16-33V FWR SWITCH POSITION SOUND PATTERN DB DC DC 1 Temporal High 84 89 89 2 Temporal Low 75 83 83 3 Non-Temporal High 85 90 90 4 Non-Temporal Low 76 84 84 5 3.1 KHz Temporal High 83 88 88 6 3.1 KHz Temporal Low 76 82 82 7 3.1 KHz Non-Temporal High 84 89 89 8 3.1 KHz Non-Temporal Low 77 83 83 9 Coded High 85 90 90 10 3.1 KHz Coded High 84 89 89 UL MAX STROBE CURRENT DRAW ( mA RMS) CANDELA 8-17.5V 16-33V DC DC FWR CANDELA RANGE 15 88 43 60 30 143 63 83 75 N/A 107 136 95 N/A 121 155 110 N/A 148 179 135 N/A 172 209 185 N/A 222 257 Compact Strobe / Horn Strobe For a complete listing of all compliance approvals and certifications, please visit www.farenhyt.com. Microsoft, Windows, and the Windows Logo are registered trademarks or trademarks of Microsoft Corporation. Honeywell® and System Sensor® are registered trademark of and Farenhyt™ is a trademark of Honeywell International, Inc. This document is not intended to be used for installation purposes. We try to keep our product information up-to date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For Technical Support, Please call 800-446-6444. WALL HORN STROBES P2RL: 2-Wire, Horn Strobe, Red P2WL: 2-Wire, Horn Strobe, White P2GRL: 2-Wire, Compact Horn Strobe, Red P2GWL: 2-Wire, Compact Horn Strobe, White P2RL-P: 2-Wire, Horn Strobe, Red, Plain P2WL-P: 2-Wire, Horn Strobe, White, Plain P2RL-SP: 2-Wire, Horn Strobe, Red, FUEGO P2WL-SP: 2-Wire, Horn Strobe, White, FUEGO WALL STROBES SRL: Strobe, Red SWL: Strobe, White SGRL: Compact Strobe, Red SGWL: Compact Strobe, White SRL-P: Strobe, Red, Plain SWL-P: Strobe, White, Plain SRL-SP: Strobe, Red, FUEGO SWL-CLR-ALERT: Strobe, White, ALERT Doc 351574 | Rev B | 02/18 © 2018 Honeywell International Inc. For more information Learn more about Honeywell’s Farenhyt Series and other products available by visiting www.farenhyt.com Honeywell Security & Fire 12 Clintonville Road Northford, CT 06472 800-328-0103 L-SERIES DIMENSIONS HORNS HRL: Horn, Red HWL: Horn, White HGRL: Compact Horn, Red HGWL:Compact Horn, White ACCESSORIES TR-2: Universal Wall Trim Ring Red TR-2W: Universal Wall Trim Ring, wht SBBRL: Wall Surface Mount Back Box, Red SBBWL: Wall Surface Mount Back Box, White SBBGRL: Compact Wall Surface Mount Back Box, Red SBBGWL: Compact Wall Surface Mount Back Box, White Note: All - P models having a plain housing (no"FIRE marking on cover. All-SP models have "FUEGO" marking on cover All -ALERT models have "ALERT" marking on cover L-SERIES ORDERING INFORMATION Agency Listings AVDS115-02 • 12/3/2019 • Page 1 MEA452-05-E3023572 7300-1653:187 (outdoor strobes) 7125-1653:188 (horn strobes, chime strobes) 7135-1653:189 (horns, chimes) S4011 (chimes, horn strobes, horns) S3593 (outdoor and alert strobes) Features • Weatherproof per NEMA 4X, IP56 • Listed to UL 1638 (strobe) and UL 464 (horn) • Compatible with System Sensor synchronization protocol and legacy SpectrAlert products • Field-selectable candela settings: 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185 • Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela • Rotary switch for horn tone and three volume selections • Horn rated at 88+ dBA at 16 volts • Rated from –40°F to 151°F • Universal mounting plate with an onboard shorting spring that tests wiring continuity before devices are installed • Plug-in design with minimal intrusion into the back box • Tamper-resistant construction • Listed for ceiling or wall mounting SpectrAlert Advance offers the broadest line of outdoor horns, strobes, and horn strobes in the industry. With white or red plastic housings, wall or ceiling mounting options, and plain or FIRE-printed devices, SpectrAlert Advance can meet virtually any application requirement, including indoor, outdoor, wet, and dry applications in temperatures from −40°F to 151°F. Like the entire SpectrAlert Advance line, outdoor horns, strobes, and horn strobes for wall applications include a variety of features that increase application flexibility and simplify installation. First, field-selectable settings, including candela, automatic selection of 12- or 24-volt operation, horn tones, and three volume options enable installers to easily adapt devices to meet requirements. Next, SpectrAlert Advance devices use a universal mounting plate for both wall and ceiling applications. This mounting plate includes an onboard shorting spring that ensures wiring continuity before devices are installed, so installers can verify proper wiring without mounting the devices and exposing them to potential construction damage. Once the plates are mounted, all SpectrAlert Advance devices utilize a plug-in design with a single captured screw to speed installation and virtually eliminate costly ground faults. Outdoor devices ship with weatherproof plastic back boxes (metal back boxes are available separately) that accommodate in-and- out wiring for daisy chaining devices. Plastic back boxes feature removable side flanges and improved resistance to saltwater corrosion. Knock-outs located on the back eliminate the need to drill holes for screw-in mounting. Plastic and metal weatherproof back boxes come with ¾-inch top and bottom conduit entries and ¾-inch knock-outs at the back. A screw-in NPT plug with an O-ring gasket for a watertight seal is included with each back box. Outdoor Selectable- Output Horns, Strobes, and Horn Strobes for Wall Applications SpectrAlert® Advance outdoor audible visible products are rich with features that cut installation times and maximize profits. AVDS115-02 • 12/3/2019 • Page 2 SpectrAlert Advance Outdoor Horn, Strobe, and Horn StrobeSpecifications Architect/Engineer Specifications General SpectrAlert Advance outdoor horns, strobes, and horn strobes shall mount to a weatherproof back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance products, when used with the Sync•Circuit™ Module accessory, shall be powered from a non-coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt-rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Outdoor SpectrAlert Advance products shall operate between −40 and 151 degrees Fahrenheit from a regulated DC or full- wave rectified unfiltered power supply. Strobes and horn strobes shall have field-selectable candela settings including 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185. Strobe The strobe shall be a System Sensor SpectrAlert Advance Model _______ listed to UL 1971 and shall be approved for fire protective service. The strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The strobe must be installed with its weatherproof back box in order to remain outdoor approved per UL. The strobe shall be suitable for use in wet environments. Horn Strobe Combination The horn strobe shall be a System Sensor SpectrAlert Advance Model _______ listed to UL 1971 and UL 464 and shall be approved for fire protective service. The horn strobe shall be wired as a primary-signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have three audibility options and an option to switch between a temporal three pattern and a non-temporal (continuous) pattern. These options shall be set by a multiple position switch. On four-wire products, the strobe shall be powered independently of the sounder. The horn or horn strobe models shall operate on a coded or non-coded power supply. The horn strobe must be installed with its weatherproof back box in order to remain outdoor approved per UL. The horn strobe shall be suitable for use in wet environments. Physical/Electrical Specifications Operating Temperature –40°F to 151°F (–40°C to 66°C) Strobe Flash Rate 1 flash per second Nominal Voltage Regulated 12 DC/FWR or regulated 24 DC/FWR1 Operating Voltage Range2 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal) Operating Voltage with MLD3 Sync Module 8.5 to 17.5 V (12 V nominal) or 16.5 to 33 V (24 V nominal) Input Terminal Wire Gauge 12 to 18 AWG Wall-Mount Dimensions (including lens)5.6˝ L × 4.7˝ W × 2.5˝ D (142 mm L × 119 mm W × 64 mm D) Horn Dimensions 5.6˝ L × 4.7˝ W × 1.3˝ D (142 mm L × 119 mm W × 33 mm D) Wall-Mount Weatherproof Back Box Dimensions (SA-WBB)5.7˝ L × 5.1˝ W × 2.0˝ D (145 mm L × 130 mm W × 51 mm D) Notes: 1. Full Wave Rectified (FWR) voltage is a non-regulated, time-varying power source that is used on some power supply and panel outputs. 2. 2. P, S, PC, and SC products will operate at 12 V nominal only for 15 and 15/75 cd. UL Max. Strobe Current Draw (mA RMS) Candela 8–17.5 Volts 16–33 Volts DC FWR DC FWR Standard Candela Range 15 123 128 66 71 15/75 142 148 77 81 30 NA NA 94 96 75 NA NA 158 153 95 NA NA 181 176 110 NA NA 202 195 115 NA NA 210 205 High Candela Range 135 NA NA 228 207 150 NA NA 246 220 177 NA NA 281 251 185 NA NA 286 258 UL Max. Current Draw (mA RMS), 2-Wire Horn Strobe, Standard Candela Range (15–115 cd) DC Input 8–17.5 Volts 16–33 Volts 15 15/75 15 15/75 30 75 95 110 115 Temporal High 137 147 79 90 107 176 194 212 218 Temporal Medium 132 144 69 80 97 157 182 201 210 Temporal Low 132 143 66 77 93 154 179 198 207 Non-Temporal High 141 152 91 100 116 176 201 221 229 Non-Temporal Medium 133 145 75 85 102 163 187 207 216 Non-Temporal Low 131 144 68 79 96 156 182 201 210 FWR Input Temporal High 136 155 88 97 112 168 190 210 218 Temporal Medium 129 152 78 88 103 160 184 202 206 Temporal Low 129 151 76 86 101 160 184 194 201 Non-Temporal High 142 161 103 112 126 181 203 221 229 Non-Temporal Medium 134 155 85 95 110 166 189 208 216 Non-Temporal Low 132 154 80 90 105 161 184 202 211 UL Max. Current Draw (mA RMS), 2-Wire Horn Strobe, High Candela Range (135–185 cd) DC Input 16–33 Volts FWR Input 16–33 Volts 135 150 177 185 135 150 177 185 Temporal High 245 259 290 297 Temporal High 215 231 258 265 Temporal Medium 235 253 288 297 Temporal Medium 209 224 250 258 Temporal Low 232 251 282 292 Temporal Low 207 221 248 256 Non-Temporal High 255 270 303 309 Non-Temporal High 233 248 275 281 Non-Temporal Medium 242 259 293 299 Non-Temporal Medium 219 232 262 267 Non-Temporal Low 238 254 291 295 Non-Temporal Low 214 229 256 262 UL Max. Horn Current Draw (mA RMS) Sound Pattern dB 8–17.5 Volts 16–33 Volts DC FWR DC FWR Temporal High 57 55 69 75 Temporal Medium 44 49 58 69 Temporal Low 38 44 44 48 Non-Temporal High 57 56 69 75 Non-Temporal Medium 42 50 60 69 Non-Temporal Low 41 44 50 50 Coded High 57 55 69 75 Coded Medium 44 51 56 69 Coded Low 40 46 52 50 UL Current Draw Data Horn Tones and Sound Output DataCandela Derating For K series products used at low temperatures, listed candela ratings must be reduced in accordance with this table. Strobe Output (cd) Listed Candela Candela rating at –40°F 15 Do not use below 32°F15/75 30 75 44 95 70 110 110 115 115 135 135 150 150 177 177 185 185 Horn and Horn Strobe Output (dBA) Switch Position Sound Pattern dB 8–17.5 Volts 16–33 Volts 24-Volt Nominal Reverberant Anechoic DC FWR DC FWR DC FWR DC FWR 1 Temporal High 78 78 84 84 88 88 99 98 2 Temporal Medium 74 74 80 80 86 86 96 96 3 Temporal Low 71 73 76 76 83 80 94 89 4 Non- Temporal High 82 82 88 88 93 92 100 100 5 Non- Temporal Medium 78 78 85 85 90 90 98 98 6 Non- Temporal Low 75 75 81 81 88 84 96 92 7†Coded High 82 82 88 88 93 92 101 101 8†Coded Medium 78 78 85 85 90 90 97 98 9†Coded Low 75 75 81 81 88 85 96 92 †Settings 7, 8, and 9 are not available on 2-wire horn strobe. 3825 Ohio Avenue • St. Charles, IL 60174 Phone: 800-SENSOR2 • Fax: 630-377-6495 www.systemsensor.com ©2019 System Sensor. Product specifications subject to change without notice. Visit systemsensor.com for current product information, including the latest version of this data sheet. AVDS115-02 • 12/3/2019 SpectrAlert Advance Diagrams Model Description Red White Wall Horn Strobes P2RK P2WK 2-Wire Horn Strobe, Standard cd, Outdoor (includes plastic weatherproof back box) P2RK-P P2WK-P 2-Wire Horn Strobe, Standard cd, Outdoor, Plain (includes plastic weatherproof back box) P2RK-R P2WK-R 2-Wire Horn Strobe, Standard cd, Outdoor (does not include plastic weatherproof back box) P2RHK P2WHK 2-Wire Horn Strobe, High cd, Outdoor (includes plastic weatherproof back box) P2RHK-P P2WHK-P 2-Wire Horn Strobe, High cd, Outdoor, Plain (includes plastic weatherproof back box) P2RHK-R P2WHK-R 2-Wire Horn Strobe, High cd, Outdoor (does not include plastic weatherproof back box) P4RK P4WK 4-Wire Horn Strobe, Standard cd, Outdoor (includes plastic weatherproof back box) P4RK-R —4-Wire Horn Strobe, Standard cd, Outdoor (does not include plastic weatherproof back box) P2RHK-120 —2-Wire Horn Strobe, High cd, Outdoor, 120 V (includes plastic weatherproof back box) Wall Strobes SRK SWK Strobe, Standard cd, Outdoor (includes plastic weatherproof back box) SRK-P SWK-P Strobe, Standard cd, Outdoor, Plain (includes plastic weatherproof back box) SRK-R SWK-R Strobe, Standard cd, Outdoor (does not include plastic weatherproof back box) SRHK SWHK Strobe, High cd, Outdoor (includes plastic weatherproof back box) SRHK-P SWHK-P Strobe, High cd, Outdoor, Plain (includes plastic weatherproof back box) SRHK-R SWHK-R Strobe, High cd, Outdoor (does not include plastic weatherproof back box) Horns HRK —Horn, Red, Outdoor (includes plastic weatherproof back box) HRK-R —Horn, Red, Outdoor (does not include plastic weatherproof back box) Accessories SA-WBB SA-WBBW Metal Weatherproof Back Box WTP WTPW Metal Weatherproof Outdoor Flush-mounting Plate SpectrAlert Advance Ordering Information Notes: All -P models have a plain housing (no “FIRE” marking on cover). All -R models require metal weatherproof outdoor flush mounting plate or a metal weatherproof outdoor back box (order separately). “Standard cd” refers to strobes that include 15, 15/75, 30, 75, 95, 110, and 115 candela settings. “High cd” refers to strobes that include 135, 150, 177, and 185 candela settings. When replacing standard outdoor units both the device and back box must be replaced. 4.7˝ 5.6˝ 6.8˝Dia. 2.5˝ 2.5˝64mm119mm 142mm Wall-Mount Horn Strobes Wall Plastic Weatherproof Back Box Wall-Mount Horn Strobe with Plastic Weatherproof Back Box PS SERIESTERMINALS: (mm) DIMENSIONS: inch (mm)PERFORMANCE SPECIFICATIONS Nominal Voltage 12 volts (6 cells) Nominal Capacity 20-hr. (900mA to 10.50 volts) 10-hr. (1.71A to 10.50 volts) 5-hr. (3.06A to 10.20 volts) 1-hr. (11.5A to 9.60 volts) 18.00 AH 17.10 AH 15.30 AH 11.50 AH Approximate Weight 12.32 lbs. (5.6 kg) Internal Resistance (approx.) 10.5 milliohms Max Short-Duration Discharge Current (5 Sec.)270.0 amperes Shelf Life (% of nominal capacity at 68°F (20°C) 1 Month 3 Month6 Month 92% 90%80% Operating Temperature Range ChargeDischarge 5°F (-15°C) to 122°F (50°C) 5°F (-15°C) to 104°F (40°C) Case ABS Plastic Power Sonic Chargers PSC-122000A-CPSC-122000-PC PSC-124000-PC PSC-124000A-C www.power-sonic.com To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website.© 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. All data subject to change without notice. E&O.E POWER-SONIC EMEA (EMEA – EUROPE, MIDDLE EAST AND AFRICA) Smitspol 4, 3861 RS Nijkerk,The NetherlandsT NL: + 31 33 7410 700 T UK: + 44 1268 560 686 T FR: + 33 344 32 18 17 E: salesEMEA@power-sonic.com GLOBAL HEADQUARTERS (USA AND INTERNATIONAL EXCLUDING EMEA) Power-Sonic Corporation 365 Cabela Dr Suite 300, Reno, Nevada 89523 USAT: +1 619 661 2020 E: customer-service@power-sonic.com General Purpose Fire & SecurityEmergency Lighting Warning: Risk of fire, explosion, or burns.Do not disassemble,heat above 60 C, or incinerate. Rechargeable Sealed Lead-Acid BatteryDC power, constant voltage chargeCycle use: 14.4 - 15.0V(20 C)Standby use: 13.5 - 13.8V(20 C)Initial current: 5.4A MAX 831334001054 MODEL PS-12180 NB 12 Volt 18.0 Amp. Hr. Sealed RechargeableBattery 120180400208 L HT H W Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. L: 7.13 (181) W: 3.00 (76) H: 6.59 (167) HT: 6.59 (167) L: 7.13 (181) W: 3.00 (76) H: 6.59 (167) HT: 6.59 (167) Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. FEATURES •5 year design life •Absorbent Glass Mat (AGM) technology for superior performance •Valve regulated, maintenance free spill proof construction •Power/volume ratio yielding excellent energy density •Rugged vibration and impact resistant ABS case and cover •Gas recombination technology APPROVALS •Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified •U.L. recognized •ISO9001:2015 – Quality management systems Medical Rev1: 08/20PS-12180 12V 18.0 AH @ 20-hr.12V 17.1 AH @ 10-hr. Rechargeable Sealed Lead Acid Battery PS – General Purpose Series Torque – Not Applicable 6.351.57.95 3.4 2.5 0.8F2: Quick disconnect tabs, 0.250" x 0.032" – Mate with AMP. INC FASTON “250” series NB2: Tin plated brass post with ‘Nut & Bolt’ fasteners Torque: 3.9~5.4 Nxm T12: Threaded insert with 5mm stud fastener Torque: 2.0~3.0 Nxm 14mm 4.5mm6mm12mm2mm 12mm M5 6mm PS SERIESwww.power-sonic.com To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website.© 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. All data subject to change without notice. E&O.E POWER-SONIC EMEA (EMEA – EUROPE, MIDDLE EAST AND AFRICA) Smitspol 4, 3861 RS Nijkerk,The NetherlandsT NL: + 31 33 7410 700 T UK: + 44 1268 560 686 T FR: + 33 344 32 18 17 E: salesEMEA@power-sonic.com GLOBAL HEADQUARTERS (USA AND INTERNATIONAL EXCLUDING EMEA) Power-Sonic Corporation 365 Cabela Dr Suite 300, Reno, Nevada 89523 USAT: +1 619 661 2020 E: customer-service@power-sonic.com SHELF LIFE & STORAGE LIFE CHARACTERISTICS IN STAND-BY USE Capacity Retention Ratio (%)Standing Period (Months) 100 80 60 40 00 2 4 6 8 10 12 14 16 18 20 40oC (104oF) 30oC(86oF)20oC(68oF) 5oC(41oF) Charging is not necessary unless 100% of capacity is required. Charging beforeuse is necessaryto help recoverfull capacity. 100 80 60 40 20 0 02468 10 Ambient Temperature 20˚C (68˚F) Float Charging Voltage 2.25 - 2.30 V/Cell Years SHELF LIFE & STORAGE LIFE CHARACTERISTICS IN STAND-BY USE Percentage of capacityavailable (Ah%)Capacity Retention Ratio (%)Standing Period (Months) 100 80 60 40 00 2 4 6 8 10 12 14 16 18 20 40oC (104oF) 30oC(86oF)20oC (68oF) 5oC(41oF) Charging is not necessary unless 100% of capacity is required. Charging beforeuse is necessaryto help recoverfull capacity. 100 80 60 40 20 0 012345 Ambient Temperature 20˚C (68˚F) Float Charging Voltage 2.25 - 2.30 V/Cell Years SHELF LIFE & STORAGE LIFE CHARACTERISTICS IN STAND-BY USE Percentage of capacityavailable (Ah%)CHARGING Cycle Applications: Apply constant voltage charge at 2.35v/c – 2.45v/c (14.1 – 14.7v for 12v Monobloc) at 20°C. Initial charging current should be set at less than 0.25C Amps. Switch to float charge to avoid overcharging. “Float” or “Stand-By” Service: Apply constant voltage charge of 2.25v/c – 2.30v/c (13.5 to 13.8 volts for 12v Monobloc at 20°C. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. Temperature Compensation: Charging Voltage for both Cyclic and Standby applications should be regulated in relation to ambient temperature. As temperature rises charging voltage should be reduced to prevent overcharge and increased as temperature falls to avoid undercharge. For further charging information including temperature compensation factors, see Power Sonic Technical Manual/ Power Sonic Charger specifications. CHARGERS Power Sonic offers a wide range of chargers suitable for batteries with a variety of capacities. Please refer to our website for more information on our switch mode and transformer type chargers. Please contact our technical department for advice if you have difficulty in locating a suitable charger. FURTHER INFORMATION Please refer to our website www.power-sonic.com for a complete range of useful downloads, such as product catalogs, material safety data sheets (MSDS), ISO certification, etc. APPLICATIONS •General purpose •Emergency lighting •Medical •Fire and security PS-12180 12V 18.0 AH @ 20-hr.12V 17.1 AH @ 10-hr. Rechargeable Sealed Lead Acid Battery PS – General Purpose Series Rev1: 08/20 PS SERIESTERMINALS: (mm) DIMENSIONS: inch (mm)PERFORMANCE SPECIFICATIONS Nominal Voltage 12 volts (6 cells) Nominal Capacity 20-hr. (350mA to 10.50 volts) 10-hr. (650mA to 10.50 volts) 5-hr. (1.2A to 10.20 volts) 1-hr. (4.5A to 9.00 volts) 7.00 AH 6.50 AH 6.00 AH4.50 AH Approximate Weight 4.80 lbs. (2.18 kg) Internal Resistance (approx.) 23.0 milliohms Max Short-Duration Discharge Current (10 Sec.)70.0 amperes Shelf Life (% of nominal capacity at 68°F (20°C)1 Month 3 Month 6 Month 97% 91% 83% Operating Temperature Range Charge Discharge 5°F (-15°C) to 122°F (50°C) -4°F (-20°C) to 140°F (60°C) Case ABS Plastic Power Sonic Chargers PSC-12800A-C PSC-121000-PC www.power-sonic.com To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. © 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.All data subject to change without notice. E&O.E CORPORATE HEADQUARTERS (USA AND INTERNATIONAL EXCLUDING EMEA) Power-Sonic Corporation 7550 Panasonic Way, San Diego, California 92154 T: +1 (619) 661 2020 F: +1 (619) 661 3650 E: customer-service@power-sonic.com POWER-SONIC EUROPE LIMITED (EMEA – EUROPE, MIDDLE EAST AND AFRICA) 3 Buckingham Square, Hurricane Way, Wickford, Essex SS11 8YQ T: +44 (0)1268 560686 F: +44 (0)1268 560902 E: salesEMEA@power-sonic.com General Purpose Fire & SecurityEmergency Lighting MODEL PS-1270 F1 12 Volt 7.0 Amp. Hr. Warning: Risk of fire, explosion, or burns.Do not disassemble, heat above 60 C, or incinerate. Rechargeable Sealed Lead-Acid BatteryDC power, constant voltage chargeCycle use: 14.4 - 15.0V(20 C)Standby use: 13.5 - 13.8V(20 C)Initial current: 2.1A MAX 801334001000Sealed RechargeableBattery 120070260211 L HT H W Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. L: 5.95 (151) W: 2.56 (65) H: 3.70 (94) HT: 3.86 (98) L: 5.95 (151) W: 2.56 (65) H: 3.70 (94) HT: 3.86 (98) Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. FEATURES •Absorbent Glass Mat (AGM) technology for superior performance •Valve regulated, maintenance free spill proof construction •Power/volume ratio yielding excellent energy density •Rugged vibration and impact resistant ABS case and cover •Gas recombination technology •5 year design life APPROVALS •Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certifi ed •U.L. recognized •ISO9001:2015 – Quality management systems Medical Rev1: 11/18PS-1270 12V 7.0 AH @ 20-hr.12V 6.5 AH @ 10-hr. Rechargeable Sealed Lead Acid Battery PS – General Purpose Series OR Torque – Not Applicable 4.751.56.35 3.2 2.5 0.8F1: Quick disconnect tabs, 0.187" x 0.032" – Mate with AMP. INC. FASTON “187” series Torque – Not Applicable 6.351.57.95 3.4 2.5 0.8F2: Quick disconnect tabs, 0.250" x 0.032" – Mate with AMP. INC FASTON “250” series PS SERIESwww.power-sonic.com To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. © 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.All data subject to change without notice. E&O.E CORPORATE HEADQUARTERS (USA AND INTERNATIONAL EXCLUDING EMEA) Power-Sonic Corporation 7550 Panasonic Way, San Diego, California 92154 T: +1 (619) 661 2020 F: +1 (619) 661 3650 E: customer-service@power-sonic.com POWER-SONIC EUROPE LIMITED (EMEA – EUROPE, MIDDLE EAST AND AFRICA) 3 Buckingham Square, Hurricane Way, Wickford, Essex SS11 8YQ T: +44 (0)1268 560686 F: +44 (0)1268 560902 E: salesEMEA@power-sonic.com SHELF LIFE & STORAGE LIFE CHARACTERISTICS IN STAND-BY USE Capacity Retention Ratio (%)Standing Period (Months) 100 80 60 40 00 2 4 6 8 10 12 14 16 18 20 40oC(104oF) 30oC(86oF)20oC(68oF) 5oC (41oF) Charging is not necessary unless 100% of capacity is required. Charging beforeuse is necessaryto help recoverfull capacity. 100 80 60 40 20 0 012345 Ambient Temperature 20˚C (68˚F) Float Charging Voltage2.25 - 2.30 V/Cell Retention Capacity (%)Years SHELF LIFE & STORAGE LIFE CHARACTERISTICS IN STAND-BY USE Capacity Retention Ratio (%)Standing Period (Months) 100 80 60 40 00 2 4 6 8 10 12 14 16 18 20 40oC(104oF) 30oC (86oF)20oC (68oF) 5oC(41oF) Charging is not necessary unless 100% of capacity is required. Charging beforeuse is necessaryto help recoverfull capacity. 100 80 60 40 20 0 012345 Ambient Temperature 20˚C (68˚F) Float Charging Voltage 2.25 - 2.30 V/Cell Retention Capacity (%)Years SHELF LIFE & STORAGE LIFE CHARACTERISTICS IN STAND-BY USE CHARGING Cycle Applications: Apply constant voltage charge at 2.35v/c – 2.45v/c (14.1 – 14.7v for 12v Monobloc) at 20°C. Initial charging current should be set at less than 0.25C Amps. Switch to fl oat charge to avoid overcharging. “Float” or “Stand-By” Service: Apply constant voltage charge of 2.25v/c – 2.30v/c (13.5 to 13.8 volts for 12v Monobloc at 20°C. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. Temperature Compensation: Charging Voltage for both Cyclic and Standby applications should be regulated in relation to ambient temperature. As temperature rises charging voltage should be reduced to prevent overcharge and increased as temperature falls to avoid undercharge. For further charging information including temperature compensation factors, see Power Sonic Technical Manual/ Power Sonic Charger specifi cations. CHARGERS Power Sonic offers a wide range of chargers suitable for batteries with a variety of capacities. Please refer to our website for more information on our switch mode and transformer type chargers. Please contact our technical department for advice if you have diffi culty in locating a suitable charger. FURTHER INFORMATION Please refer to our website www.power-sonic.com for a complete range of useful downloads, such as product catalogs, material safety data sheets (MSDS), ISO certifi cation, etc. APPLICATIONS •General purpose •Emergency lighting •Medical •Fire and security PS-1270 12V 7.0 AH @ 20-hr.12V 6.5 AH @ 10-hr. Rechargeable Sealed Lead Acid BatteryPS – General Purpose Series Rev1: 11/18 SMOKEALARM CAT. 7010B PHOTOELECTRICPhotoelectric technology is generally more sensitive at detecting large par-ticles, which tend to be produced in greater amounts by smoldering fires. LATCHING ALARM INDICATORRemembers which unit initiated an alarm. OPTIPATH 360 TECHNOLOGY TM Provides 360 degrees of direct access to the smoke sensing chamber. SILENCE FEATURESilences nuisance alarms. TWO LOCKINGFEATURESPins are provided to lock battery draw-er and/or alarm to base. Perfect for apartment, dormitory or hotel applica-tions. Description: The BRK Brands, Inc. model number 7010B is a wire-in, 120V AC 60Hz single and/ or multiple station photoelectric smoke alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories and other multi-family dwellings as defined in standard NFPA 101. Model 7010B complies with UL217, CSFM, NFPA 72, HUD, FHA and other agencies that model their codes after the above agencies. It meets building codes where AC/DC with silence photoelectric smoke alarms are required. The alarms are inter- connectable with up to 18 devices, of which 12 can be smoke alarms. The BRK 7010B features a photoelectric smoke sensing chamber, an 85dB horn, a 9V battery back-up and a “silence” feature. Optipath 360 technology provides 360 degrees of direct access to the smoke sensing chamber. Alarm Latch: Easily identi- fies initiating alarm even after alarm condition has subsided. The “Perfect Mount” system features a gasketless base and a mounting bracket that keeps the alarm secure over a wide rotation range to allow for true alignment. This will allow fine- tuning on the positioning to compensate for out of aligned wall studs and to keep the wording level when wall mounting. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the side load battery compart- ment. Other Contractor Preferred features include a dust cover to keep alarm clean during construction, keyhole slots in the mounting bracket eliminate the need to remove the electrical box screws for installation. Two locking features are provided to prevent battery theft and/or theft of the unit. Connection to AC power is made with a “Quick-Connect” wiring harness. In- stallation is quick, easy and cost effective. 120V AC, 60Hz Wire-in with 9V Battery Backup Listed to StandardUL 217 PHOTOELECTRIC CAT. 7010B ARCHITECTURAL AND ENGINEERING SPEC TECHNICAL SPECS SHIPPING SPECS INSTALLATION OF ALARM The smoke alarm shall be a BRK Model 7010B and shall provide at a minimum the following features and functions:1. A photoelectric smoke sensing chamber. 2. The unit shall be capable of self restoring. 3. A fully screened sensing chamber to resist entry of small insects thereby reducing the probability of unwanted alarms.4. Powered by 120V AC, 60Hz and have a monitored 9V battery backup and a solid state piezo horn rated at 85dB at 10 ft. 5. A visual LED power-on indicator to confirm unit is receiving power or is in alarm. 6. A full function test button. The test button should check all alarm functions by stimulating the chamber to simulate a smoke condition, causing the unit to alarm.7. Latching & silence features: Alarm Latch to easily identify initiating alarm after alarm condition has subsided. Silence feature - Temporarily silence unwanted nuisance alarms. 8. Two Locking features - tamper resistant locking pins that lock battery drawer and/ or alarm to mounting bracket.9. The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and relative humidity between 10% and 95%. 10. The unit shall have a gasketless base for easy installation and be capable of keeping alarm secure over a wide rotation range to allow for true alarm alignment. 11. The unit shall have a plug in connector and be capable of interconnection of up to 18 alarms, 12 of which can be smoke alarms.12. The unit shall at a minimum meet the requirements of UL217, CSFM, NFPA 72, NFPA 101, ICC. Alarm Dimensions: 5.0”Dia. x 2.1”H Weight: 8.4 oz Operating Voltage: 120V AC 60Hz w/ 9V battery backup Temperature Range: 40°F (4°C) to 100°F (38°C) Humidity Range: 10% to 95% relative humidity (RH) Audio Alarm: 85dB at 10 feet Test/Silence: Electronically simulates smoke condition, causing the unit to alarm. Press and hold test/silence button. Alarm Reset: Automatic when smoke clears Interconnections: Up to 18 units of First Alert or BRK Smoke, CO and Heat Alarms. Maximum of 12 smoke alarms. See user’s manual for details. Smoke Sensor: Photoelectric Indicator Lights/Sounds: AC Power: Constant Green LED DC Power: Intermittent Red LED Local Alarm: Red LED flashes rapidly Latching Alarm: Red LED flashes once per second for 3 seconds after local alarm. Pattern repeats approximately every 45 secs. Remote Alarm: Audio alarm and Red LED out. Listing: Listed to UL217 Standard Individual Carton Dimensions 5.13”L x 2.38”W x 5.13”H Weight 0.55 lbs. Cube 0.04 ft3 UPC 0 29054 11201 9 Master Carton Dimensions 10.75”L x 7.88”W x 11.06”H Master Pack 12 Weight 7.1 lbs. Cube: 0.54 ft3 I2of5: 100 29054 11201 6 Pallet Information Cases per Layer 22 Number of Layers: 4 Cases per Pallet: 88 Units per Pallet: 1,056 Cube: 54.0 ft3 Weight: 678 lbs. ©2015 BRK Brands, Inc. a Jarden Corporation Company (NYSE: JAH)3901 Liberty Street RoadAurora, IL 60504-8122All rights reserved First Alert is a registered trademark of the First Alert TrustBRK is a registered trademark of BRK Brands, Inc.CM3250brkelectronics.com Installation of this smoke alarm must conform to all local electrical codes and Article 760 of the National Electrical Code (NFPA 70) and NFPA 72. Interconnected units must meet the following requirements: Total length of wire interconnecting units should be less than 1000 feet, be #18 gauge or larger and be rated at least 300V. It is recommended that all units be on the same fuse or circuit breaker. If local codes do not permit, be sure the neutral wire is common to both phases. THE PARTS OF THIS ALARM MOUNTINGBRACKETTOP VIEW SIDE VIEW 5.0” 2.1” 2 8 1 7 6 5 4 3 2 678 43 152A B }}43 15 1. Mounting bracket2. Mounting Slots3. Locking Pins 4. Hot (Black) AC Wire 5. Nuetral (White) AC Wire 6. Interconnect (Orange) Wire7. Pull out Battery Drawer8. Quick-Connect Plug 1. Smoke Alarm 2. Ceiling or Wall 3. Power Connector 4. Wire Nut 5. Junction Box6. Neutral Wire (White) 7. Interconnect Wire (Orange) 8. Hot Wire (Black) A. Unswitched 120VAC 60 Hz source B. To additional units; Maximum = 18 total (Maximum 12 Smoke Alarms) CAT. SC7010BV 10YR CO SENSOR 10YR ALARM LIFE SMOKE & CO COMBOElectrochemical CO sensor; Photoelec-tric smoke sensor. VOICE WARNING WITH LOCATIONExclusive! A voice will tell you the pro-grammed location of the unit and danger detected. SILENCE FEATURESilences nuisance alarms. END OF LIFE SIGNALProvides audible notice when alarm needs to be replaced after 10 years. SPREAD SPECTRUM HORN TONEEasier for elderly with normal age related hearing loss to hear the horn. OPTIPATH 360 TECHNOLOGY TM Provides 360 degrees of direct access to the smoke sensing chamber. Description: The BRK Model No. SC7010BV is a wire-in, 120V AC 60Hz single and/or multiple station combination smoke and carbon monoxide alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, ho-tels, motels, dormitories and other multi-family dwellings as defined in standard NFPA 101. Model SC7010BV complies with UL217 and UL2034, CSFM, NFPA 72 and NFPA 720, HUD, FHA and other agencies that model their codes after the above agencies. It meets building codes where AC/DC photoelectric smoke and carbon monoxide alarms with and without voice are required. The BRK SC7010BV is a state-of-the-art hardwired with battery backup smoke/ CO combo alarm that features a photoelectric smoke sensing chamber, an elec-trochemical CO sensor, an End of Life signal and voice warning with location. This exclusive feature incorporates a voice that will speak one of 11 pre-programmed locations and the danger detected. The Spread Spectrum Horn Tone has a lower and varying frequency that makes it easier for the elderly with normal age related hearing loss to hear the horn. This alarm features two latching features and two silence features. Alarm Latch: Easily identifies initiating alarm even after alarm condition has subsided. Low Battery Latch: Identifies which unit is in low battery condition by blinking the green power light. Low Battery Silence: Temporarily si-lence the low battery chirp for up to eight hours. Alarm Silence: Silence alarm for several minutes. Other features include an 85dB horn and silence. OptiPath 360 Technology provides 360 degrees of direct access to the smoke sensor. Two lock-ing features are provided to prevent battery theft and/or theft of the unit. Connec-tion to AC power is made with a Quick-Connect wiring harness. 120V AC, 60Hz Wire-in with 3V (two 1.5V AA) Battery Backup SMOKE & COCOMBO ALARM CAT. SC7010BV ARCHITECTURAL AND ENGINEERING SPEC TECHNICAL SPECS SHIPPING SPECS INSTALLATION OF ALARM The combination smoke and carbon monoxide alarm shall be a BRK Model SC7010BV and shall provide at a minimum the following features and functions:1. A photoelectric smoke sensing chamber and an electrochemical CO sensor both with a 10 year service life.2. Powered by 120V AC, 60Hz and have a monitored battery backup and a solid state piezo horn rated at 85dB at 10 ft. and shall be capable of self restoring.The horn shall have a lower and varying horn frequency to to make it easier for the elderly with normal age related hearing loss to better hear the horn.3. A Voice Warning of Smoke or Carbon Monoxide detected in addition to speaking 11 pre-programmed locations, e.g. “Warning, Evacuate, Smoke in Basement”4. The unit shall have an “End of Life” signal (5 chirps). This signal should be capable of temporarily being silenced for up to 2 days. After about 2 days, the signal will resume. After about 2-3 weeks the signal cannot be silenced. 5. A visual power-on indicator to confirm unit is receiving AC power or has switched to battery backup mode. Separate LED ‘s to indicate a smoke or CO alarm.6. The CO sensor is adjusted not to detect CO levels below 30 PPM and will not alarm when exposed to constant levels of 30 PPM for 30 days. It will alarm at the following levels: 400 PPM CO between 4 and 15 minutes, 150 PPM CO between 10 and 50 minutes and 70 PPM CO between 60 and 240 minutes.7. Two Latching features: Alarm Latch to easily identify initiating alarm after alarm condition has subsided. Low battery latch: to visually identify which unit is in low battery condition. Two Silence Features: Alarm Silence to temporarily silence nuisance alarms. Low Battery Silence to silence low battery chirp for up to 8 hours.8. Two Locking features - tamper resistant locking pins that lock battery drawer and/or alarm to mounting bracket.9. The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and relative humidity between 10% and 95%.10. The unit shall have a plug in connector and be capable of interconnection of up to 18 alarms, 12 of which can be smoke alarms.11. The unit shall at a minimum meet the requirements of UL217 and UL2034, CSFM, NFPA 72 and 720 and the ICC. Alarm Dimensions: 5.0”dia. x 2.0”H Weight: 9.3 oz Operating Voltage: 120V AC 60Hz with 3V alkaline battery backup (two 1.5V) Operating Current: 0.05 amps (standby/alarm) Temperature Range: 40°F (4°C) to 100°F (38°C) Humidity Range: 10% to 95% relative humidity (RH) Audio Alarm: 85dB at 10 feet Voice Output: Choice of 11 pre-programmed locations warns of smoke or CO danger and location of danger Test/Silence: Electronically simulates smoke or CO condition, causing the unit to alarm. Press and hold test/silence button. Alarm Reset: Automatic when smoke or CO clears Interconnections: Up to 18 units of First Alert or BRK Smoke, CO and Heat Alarms. Maximum of 12 smoke alarms. Smoke Sensor: Photoelectric CO Sensor: Electrochemical Indicator Lights/Sounds: AC Power: Constant Green LED DC Power: Intermittent Green LED Local Alarm: Red LED flashes, Voice: “Smoke” or “CO” with location Remote Alarm: Red LED off, Voice: “Smoke” or “CO” without location Latching Alarm: Red LED flashes every 5 seconds after local alarm Low Battery Latch: “Power” LED flashes green on for 2 sec, off for 2 sec Listing: Listed to UL217 and UL2034 Standards Individual Carton Dimensions 5.13”L x 2.38”W x 5.13”H Weight 0.74 lbs. Cube 0.04 ft3 UPC 0 29054 00229 7 Master Carton Dimensions 10.75”L x 7.88”W x 11.06”H Master Pack 12 Weight 9.4 lbs. Cube: 0.54 ft3 I2of5: 100 29054 00229 4 Pallet Information Cases per Layer 22 Number of Layers: 4 Cases per Pallet: 88 Units per Pallet: 1,056 Cube: 54.0 ft3 Weight: 892 lbs. ©2016 BRK Brands, Inc. a subsidiary of Newell Brands (NYSE: NWL) 3901 Liberty Street Road, Aurora, IL 60504-8122, All rights reserved. First Alert is a registered trade-mark of the First Alert Trust. BRK is a registered trademark of BRK Brands, Inc.CM3235 brkelectronics.com Installation of this smoke alarm must conform to all local electrical codes and Article 760 of the National Electrical Code (NFPA 70) and NFPA 72. Interconnected units must meet the following requirements: Total length of wire interconnecting units should be less than 1000 feet, be #18 gauge or larger and be rated at least 300V. It is recommended that all units be on the same fuse or circuit breaker. If local codes do not permit, be sure the neutral wire is common to both phases. THE PARTS OF THIS ALARM 1. Mounting bracket 2. Mounting Slots 3. Locking Pins 4. Hot (Black) AC Wire 5. Nuetral (White) AC Wire 6. Interconnect (Orange) Wire 7. Pull-out battery drawer 8. Quick-Connect Plug MOUNTINGBRACKETTOP VIEW SIDE VIEW 5.0” 2.0” 1. Smoke /CO Alarm 2. Ceiling or Wall 3. Power Connector 4. Wire Nut 5. Junction Box 6. Neutral Wire (White) 7. Interconnect Wire (Orange)8. Hot Wire (Black) A. Unswitched 120VAC 60 Hz source B. To additional units; Maximum = 18 total (Maximum 12 Smoke Alarms) 2 8 1 7 6 5 4 3 2 678 43 152A B }}43 15 BATTERY DRAWER LOCK Remove Pin from Mounting Bracket Close Door. Insert Pin in Holes through alarm and Battery Drawer Automation and Control Solutions Honeywell 12 Clintonville Road 1(877) HPP-POWR Northford, CT 06472-1610 hpp.techserv@honeywell.com www.honeywellpower.com This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. System Sensor® is a registered trademark of Honeywell International Inc. ©2010 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. DH-60541:C1 August 2010 Made in the U.S.A. ® U.S. Registered Trademark © 2010 Honeywell International Inc. Page 2 of 2 • Separate Trouble and AC Fail Form-C relay contacts. • The Trouble Form-C relay contacts selectable for immediate or a 2 hour delay with AC failure. • 26 AH battery charger capability: –HPFF8(E) supports two 12V 18AH batteries –HPFF8CM(E) supports two 12V 12AH batteries per unit. • NAC Overload protection and indication. • Provision for mounting single or 6 circuit addressable con- trol or relay modules inside the enclosure. (Use mounting kit PN 90475.) Specifications Primary Input Power: 120VAC, 60Hz, 3.6A standard; 240VAC, 50Hz, 1.5A on units with E suffix. Secondary Power: 24 volt operation: two 7-26 AH batteries. Battery Charging Capacity: Up to 26 AH batteries. HPFF8 Cabinet: Holds up to two 18AH batteries. HPFF8CM: Holds up to two 12AH batteries. Total Output Current: 8.0A max. Standby Current: 0.075 A. Auxiliary Power Output: 2.0A under all conditions. NAC Output Ratings: 24VDC fully regulated, 3.0A max per circuit (8.0A total). End-of-Line Resistor Range: 1.9K to 25k ohm, ½ watt. Prod- uct ships with 4 separate programming resistors. They are 3.9K (5 each - only need one for programming), 2.2K (1 each), 4.7K (1 each) and 10K (1 each) Common Trouble: 2.0A at 30VDC. Relay Fail Relay: 2.0A at 30VDC. Input Control Circuits: compatible with 12 and 24 VDC con- trol panel NACs. Input Control Current (alarm): 5.68 mA @ 12 VDC, 12.28 mA @ 24 VDC. Temperature Rating: 32°F to 120°F (0°C to 49°C). Relative Humidity: 10% to 93% non-condensing. Cabinet Dimensions: •HPFF8 Cabinet: 16.65" W x 19.0" H x 5.2" D (42.29 W x 48.26 H 13.23 D cm) •Large equipment enclosure (EQBB-D4): 24" W x 45.9" H x 5.15" D (60.96 W x 116.52 H x 13.1D cm) Product Line Information HPFF8: 8.0A fire rated power supply. Unit includes red enclo- sure, battery cable and installation instructions. 120VAC/60Hz. HPFF8E: 240VAC/50Hz version of HPFF8. HPFF8CM: 8.0A fire rated power supply (chassis mounted). Unit includes mounting hardware, battery cable and instruc- tions for installation in large equipment enclosure. 120VAC/ 60Hz. HPFF8CME: 240VAC/50Hz version of HPFF8CM. HPP31076: Class A (Style Z) NAC Adaptor. Increase Class A circuits from 2 to 4. Large Equipment Enclosure: EQ series cabinet for mounting HPFF8CM power supplies consists of a backbox (EQBB-D4) and a locking door (EQDR-D4 or FCI-VDR-D4B). Order sepa- rately. CMF-300-6: Six-circuit supervised addressable control mod- ule activated through FACP programming on a select basis to control power supply activation or output. CMF-300: Supervised addressable control module activated through FACP programming to activate power supply. BAT-12120: Battery, 12 volt, 12.0 AH (two required). BAT-1270: Battery, 12 volt, 7.0 AH (two required). 90474: Mounting kit; required to attach an addressable mod- ule onto the control circuit board (included with supply). Listings and Approvals Listings and approvals below apply to all. In some cases, cer- tain modules may not be listed by certain approval agencies, or listing may be in process. Listed under UL 864 9th Edition. •UL Listed: S24562 • FM Approved •CSFM: 7315-1637:0102 •NYFD: COA#6032 CAT 1038335 MODEL 7020BSL AC POWERED WITH 10 YEAR SEALED BATTERY BACKUP INTEGRATED SMOKE ALARM & STROBE LIGHT Requires only one junction box. Saves installation time and costs. One device includes both a strobe light and photoelectric smoke alarm. SMART STROBE Separate flash patterns to distinguish between smoke and carbon monoxide. 177 CANDELA SYNCHRONIZED LED STROBE Powerful 177 candela LED strobe light provides effective visual warning to hearing impaired residents. When multiple units installed, strobe flashes in unison. 1Hz FLASH RATE 60 flashes per minute rate meets ADA, ANSI 117.1, NFPA 72 and UL1971 requirements for visual signal devices. 10 YEAR SEALED BATTERY Lithium Metal long life battery to supply power to the alarm in the event of power failure for the 10 year life of the alarm. Sealed in the alarm housing to prevent tampering or removal. OPTIPATH 360 TECHNOLOGY™ Provides 360 degrees of direct access to the smoke sensing chamber. Description: The BRK Brands, Inc. Model Number 7020BSL (CAT 1038335) is a wire-in, 120V AC 60Hz single and/or multiple station photoelectric smoke alarm with integrated 177 candela LED strobe light specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, public housing, dormitories and other multifamily dwellings as defined in standard NFPA 101. Model 7020BSL complies with UL217, UL1971, CSFM, NFPA 72, HUD, FHA and other agencies that model their codes after the above agencies. They meet building codes where AC with battery backup, silence, photoelectric smoke alarms are required. The alarms are inter-connectable with up to 18 devices, of which 12 can be smoke alarms. The BRK 7020BSL alarms feature a photoelectric smoke sensing chamber, an integrated 177 LED candela strobe light, an 85dB horn and sealed 3V lithium battery capable of providing backup power for alarm over 10 year alarm life. The Strobe Light is designed to provide deaf & hard of hearing individuals with a visual warning of a fire. The Smart Strobe has separate flash patterns for smoke/ heat and carbon monoxide dangers (when connected to a First Alert CO alarm). This helps a hearing impaired person better distinguish the danger present. The 177 candela LED strobe meets UL 1971 requirements and flashes at a rate of an average of 60 times a minute. The LED flash is also synchronized so when multiple units installed, strobes flash in unison. This alarm features two latching features and two silence features. Alarm Latch: Easily identifies initiating alarm even after alarm condition has subsided. Low Battery Latch: Identifies which unit is in low battery condition by blinking the green power light. Low Battery Silence: Temporarily silence the low battery chirp for up to eight hours. Alarm Silence: Silence alarm for several minutes. Optipath 360 technology provides 360 degrees of direct access to the smoke sensing chamber. Other Contractor preferred features include a dust cover, easy twist-lock mounting bracket and a “Quick-Connect” wiring harness. 120V AC, 60Hz Wire-in with 10 Year Sealed Lithium Battery Backup SMOKE ALARM & LED STROBE PHOTOELECTRIC UL 1971Standards UL 217& Listed to 10YEAR ARCHITECTURAL AND ENGINEERING SPEC TECHNICAL SPECS UL 1971 Signaling Devices Light Dispersion Chart SHIPPING SPECSINSTALLATION OF ALARM The integrated strobe light & smoke alarm shall be a BRK Model 7020BSL and shall provide at a minimum the following features and functions:1. A photoelectric smoke sensing chamber. 2. A 177 candela LED strobe light. The Smart Strobe shall have separate flash patterns to distinguish between smoke/heat and carbon monoxide dangers. When multiple units installed, strobe flash patterns will synchronize. 3. Fully screened sensing chamber to resist entry of small insects thereby reducing the probability of unwanted alarms. 4. Powered by 120V AC, 60Hz and have a sealed 10 year lithium battery backup for alarm and a solid state piezo horn rated at 85dB at 10 ft and be capable of self-restoring. 5. A visual green LED power-on indicator to confirm unit is receiving power or is in alarm. 6. A full function test button should check all alarm functions by simulating a smoke condition, causing the unit to alarm. 7. Two Latching features: Alarm Latch to easily identify initiating alarm after alarm condition has subsided. Low battery latch: to visually identify which unit is in low battery condition. Two Silence Features: Alarm Silence to temporarily silence nuisance alarms. Low Battery Silence to silence low battery chirp for up to 8 hours. 8. The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and relative humidity between 10% and 90%. 9. The unit shall have a plug in connector and be capable of interconnection of up to 18 alarms, 12 of which can be smoke alarms. 10. The unit shall at a minimum meet the requirements of UL217, UL1971, ADA, ANSI 117.1, CSFM, NFPA 72, NFPA 101 and the ICC. Alarm Dimensions: 5.2"dia. x 2.3"H Weight: 10.6 oz Operating Voltage: 120V AC 60Hz with 3V Sealed Lithium Metal Battery Backup for alarm. Operating Current: Alarm 0.8 A Temperature Range: 40°F (4°C) to 100°F (38°C) Humidity Range: 10% to 95% relative humidity (RH) Audio Alarm: 85dB at 10 feet Test/Silence: Electronically simulates smoke condition, causing the unit to alarm. Press and hold test/silence button. Alarm Reset: Automatic when smoke clears Interconnections: Up to 18 units of First Alert or BRK Smoke, CO and Heat Alarms. Maximum number of 12 smoke alarms. Smoke Sensor: Photoelectric Strobe Light: 177 candela LED strobe Indicator Lights/Sounds: AC Power: Constant Green LED DC Power: Green LED flash, once per minute Local Alarm: Audio alarm, steady flashing strobe and flashing Red LED Remote Alarm (Smoke): Audio alarm, steady flashing strobe and flashing Red LED Remote Alarm (CO): If this alarm interconnected to a BRK CO or Combo Alarm, then CO audio alarm, intermittent flashing strobe and Red LED OFF Silence: 10 minutes Local and Remote alarm, 8 hours End of Life Low Battery Latch: Green LED flashing 2 seconds on, 2 seconds off End of Life: 5 short chirps with 5 Green LED flashes once per minute Listing: Conforms to UL STD 217 & UL STD 1971 Individual Carton Dimensions 5.25"L x 3.0"W x 5.25"H Weight 0.86 lbs. Cube 0.05 ft3 UPC 0 29054 01801 4 Master Carton Dimensions 5.75"L x 19.13"W x 6.0"H Master Pack 6 Weight 5.55 lbs. Cube: 0.38 ft3 I2of5: 600 29054 01801 6 Pallet Information Cases per Layer 18 Number of Layers: 7 Cases per Pallet: 126 Units per Pallet: 756 Cube: 59.26 ft3 Weight: 784 lbs. ©2017 BRK Brands, Inc. All rights reserved. Distributed by BRK Brands, Inc. 3901 Liberty Street, Aurora, Illinois 60504. BRK Brands, Inc. is a subsidiary of Newell Brands Inc. (NYSE: NWL). First Alert is a registered trademark of the First Alert Trust. BRK is a registered trademark of BRK Brands, Inc.CM3290 brkelectronics.com Installation of this smoke alarm must conform to all local electrical codes and Article 760 of the National Electrical Code (NFPA 70) and NFPA 72. Interconnected units must meet the following requirements: Total length of wire interconnecting units should be less than 1000 feet, be #18 gauge or larger and be rated at least 300V. It is recommended that all units be on the same fuse or circuit breaker. If local codes do not permit, be sure the neutral wire is common to both phases. THE PARTS OF THIS ALARM 1. Mounting Bracket 2. Mounting Slots 3. Hot (Black) AC Wire 4. Neutral (White) AC Wire 5. Interconnect (Orange) Wire 6. Quick-Connect Power Connector 7. Turn this way to remove from bracket (Counterclockwise) 8. Turn this way to attach to bracket (Clockwise) 1. Alarm 2. Ceiling or Wall 3. Power Connector 4. Wire Nut 5. Junction Box 6. Neutral Wire (Wht) 7. Interconnect Wire (Orange) 8. Hot Wire (Blk) A. 120VAC 60 Hz source B. To additional units; Maximum = 18 total (Maximum 12 Smoke Alarms) CAT 1038335MODEL 7020BSL FRONT VIEW MOUNTING BRACKET SIDE VIEW 5.2" 2.3" 4 3 5 7 8 6 5 }A }B876 3 11 22 3 4 4 5 0909 Angle(In Degrees)PercentLight Intensity 05-2530-45505560657075808590 1009075554540353530302525 5454 0 90 90 45 45 0 WALL LIGHT LIGHT CEILING FIGURE 1: Light Output for Ceiling Mount FIGURE 2: Light Output for Wall Mount 10YEAR AC POWERED WITH 10 YEAR SEALED BATTERY BACKUP INTEGRATED COMBINATION ALARM & STROBE LIGHT Requires only one electrical box for 3 vital functions. Saves installation time and costs. One device includes strobe light and combination smoke/CO alarm. SMART STROBE Separate flash patterns to distinguish between smoke and carbon monoxide. 177 CANDELA SYNCHRONIZED LED STROBE Powerful 177 candela LED strobe light provides effective visual warning intended to waken hearing impaired residents. When multiple units installed, strobe is sync capable. 1Hz FLASH RATE 60 flashes per minute rate. 10 YEAR SEALED BATTERY Lithium long life battery to supply power to the alarm in the event of power failure for the 10 year life of the alarm. Sealed in the alarm housing to prevent tampering or removal. OPTIPATH 360 TECHNOLOGY™ Provides 360 degrees of direct access to the smoke sensing chamber. Description: The BRK Brands, Inc. Model Number 7030BSL (CAT 1038870) is a wire-in, 120V AC 60Hz single and/or multiple station photoelectric smoke and carbon monoxide combination alarm with integrated 177 candela LED strobe light specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, public housing, dormitories and other multifamily dwellings. Model 7030BSL conforms to UL STD 217, UL STD 2034 & UL STD 1971. The alarms are inter-connectable with up to 18 devices, of which 12 can be smoke alarms. The BRK 7030BSL alarm features a photoelectric smoke sensing chamber, an electrochemical CO sensor, an integrated 177 LED candela strobe light, an 85dB horn and sealed lithium battery capable of providing backup power for smoke and CO alarm functions over 10 year alarm life without replacement. The Strobe Light is designed to provide deaf & hard of hearing individuals with a visual warning of smoke or carbon monoxide dangers. The Smart Strobe has separate flash patterns for smoke/heat and carbon monoxide dangers. This helps a hearing impaired person better distinguish the danger present. The 177 candela LED strobe flashes at a rate of an average of 60 times a minute. The LED flash is also sync capable so when multiple LED units are installed, strobes can flash in unison. This alarm features two latching features and two silence features. The Alarm Latch easily identifies the initiating alarm with blinking RED led pattern - even after the alarm condition has subsided. Ideal when multiple alarms are installed throughout a residence or institution. The End of Life / Low Battery Latch visually identifies which unit is in a low battery or end of life condition. The convenient silence features will temporarily silence an unwanted alarm for several minutes or eliminate low battery/ end of life chirps for up to eight hours. Other Contractor preferred features include a dust cover, easy twist-lock mounting bracket with backup battery activation, and “Quick Connect” wiring harness. 120V AC, 60Hz Wire-in with 10 Year Sealed Lithium Battery Backup COMBINATION ALARM & LED STROBE PHOTOELECTRIC CAT 1038870 MODEL 7030BSL 10YEAR 3055574 Model 7030BSL CAT 1038870MODEL 7030BSL SHIPPING SPECS Individual Carton Dimensions 5.25"L x 3.0"W x 5.25"H Weight 0.87 lbs. Cube 0.05 ft3 UPC 0 29054 01814 4 Master Carton Dimensions 5.75"L x 19.13"W x 6.0"H Master Pack 6 Weight 5.63 lbs. Cube: 0.38 ft3 I2of5: 600 29054 01814 6 Pallet Information Cases per Layer 18 Number of Layers: 7 Cases per Pallet: 126 Units per Pallet: 756 Cube: 59.26 ft3 Weight: 784 lbs. 2018 BRK Brands, Inc. All rights reserved. Distributed by BRK Brands, Inc. BRK Brands, Inc. is a subsidiary of Newell Brands Inc. (NYSE:NWL). www.brkelectronics.com www.firstalert.com ARCHITECTURAL AND ENGINEERING SPEC The integrated strobe light & combination smoke & carbon monoxide shall be a BRK Model 7030BSL and shall provide at a minimum the following features and functions: 1. A photoelectric smoke sensing chamber and electrochemical carbon monoxide sensor. 2. A 177 candela LED strobe light. The Smart Strobe shall have separate flash patterns to distinguish between smoke/heat and carbon monoxide dangers. When multiple units installed, strobe flash patterns will synchronize. 3. Fully screened sensing chamber to resist entry of small insects thereby reducing the probability of unwanted alarms. 4. Powered by 120V AC, 60Hz and have a sealed 10 year lithium battery backup for alarm and a solid state piezo horn rated at 85dB at 10 ft and be capable of self-restoring. 5. A visual green LED power-on indicator to confirm unit is receiving power or is in alarm. 6. A test button should check alarm function. 7. Two Latching features: Alarm Latch to easily identify initiating alarm after alarm condition has subsided. Low battery latch: to visually identify which unit is in low battery or end of life condition. Two Silence Features: Alarm Silence to temporarily silence nuisance alarms. End of Life: Silence alarm for 8 hours. 8. The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and relative humidity between 10% and 95%. 9. The unit shall have a plug in connector and be capable of interconnection of up to 18 units with smoke, heat, CO alarms and relays, of which 12 can be smoke alarms. 10. The unit at a minimum shall conform to UL STD 217, UL STD 2034 & UL STD 1971. THE PARTS OF THIS ALARM 1. Mounting Bracket 2. Mounting Slots 3. Hot (Black) AC Wire 4. Neutral (White) AC Wire 5. Interconnect (Orange) Wire 6. Quick-Connect Power Connector 7. Turn this way to remove from bracket (Counterclockwise) 8. Turn this way to attach to bracket (Clockwise) 1. Alarm 2. Ceiling or Wall 3. Power Connector 4. Wire Nut 5. Junction Box 6. Neutral Wire (Wht) 7. Interconnect Wire (Orange) 8. Hot Wire (Blk) A. 120VAC 60 Hz source B. To additional units; Maximum = 18 total (Maximum 12 Smoke Alarms) 4 3 5 7 8 6 5 }A }B876 3 11 22 3 4 4 5 INSTALLATION OF ALARM Installation of this smoke alarm must conform to all Canadian electrical code Interconnected units must meet the following requirements: wire gauge to be per local codes. It is recommended that all units be on the same fuse or circuit breaker. If local codes do not permit, be sure the neutral wire is common to both phases. FRONT VIEW MOUNTINGBRACKETSIDE VIEW 5.2" 2.3" TECHNICAL SPECS Alarm Dimensions: 5.2"dia. x 2.3"H Weight: 10.6 oz Operating Voltage: 120V AC 60Hz with 3V Sealed Lithium Battery Backup for alarm. Operating Current: Alarm 0.8 A Temperature Range: 40°F (4°C) to 100°F (38°C) Humidity Range: 10% to 95% relative humidity (RH) Audio Alarm: 85dB at 10 feet Test/Silence: Electronically simulates smoke condition, causing the unit to alarm. Press and hold test/silence button. Alarm Reset: Automatic when smoke clears Interconnections: Up to 18 units of First Alert or BRK Smoke, CO and Heat Alarms. Maximum number of 12 smoke alarms. Smoke Sensor: Photoelectric CO Sensor: Electrochemical Strobe Light: 177 candela LED strobe Indicator Lights/Sounds: AC Power: Constant Green LED DC Power: Green LED flash, once per minute Alarm Condition: Red LED flashes with audible alarm (horn) pattern and strobe (flash) pattern Horn Pattern: Smoke - Approx. 1 beep per second for 3 beeps, then 1 second off. CO - 4 rapid beeps, then 5 seconds off. Strobe Pattern: Smoke - Constant, approx. 1 flash per second. CO - Approx. 1 flash per second for 4 flashes, then 3 seconds off. Silence: Approx. 9 minutes Smoke initiating alarm, approx. 4.5 minutes CO initiating alarm, 8 hours End of Life Alarm Latch: Smoke - Horn off and Red LED flashing 2 seconds on, 2 seconds off. CO - Same as smoke but with 4 short red LED pulses after 2 seconds on. Latching End of Life / Low Battery Indicator: Green LED flashing 2 seconds on, 2 seconds off End of Life Signal / Low Battery Signal: 5 short chirps with 5 Green LED flashes once per minute Listing: Conforms to UL STD 217, UL STD 2034 & UL STD 1971 10YEAR CAT 1038510 MODEL SLED177 SMART STROBE Separate flash patterns to distinguish between smoke and carbon monoxide. 177 CANDELA LED STROBE Powerful 177 candela LED strobe light provides effective visual warning to awaken hearing impaired residents. 1Hz FLASH RATE 60 flashes per minute rate meets ADA, ANSI 117.1, NFPA 72 and UL STD 1971 requirements for visual signal devices. STROBE SIGNAL SYNCHRONIZATION When multiple units installed, strobes flash in unison. SLIM DESIGN Attractive low profile design, mounts easily on ceiling or wall. Description: BRK Model SLED177 (Cat 1038510) is an ADA hearing impaired strobe light specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, public housing dormitories, and other multifamily dwellings as defined in standards. BRK Model SL177 is a state of the art Strobe Light designed to provide hearing impaired individuals with a visual warning of a fire or a carbon monoxide danger when used with smoke, heat or carbon monoxide alarms. The Smart Strobe has separate flash patterns to distinguish between smoke/heat and carbon monoxide dangers. These different patterns are to help a deaf & hard of hearing person better distinguish the danger present. The 177 candela LED strobe meets UL1971 requirements and flashes at a rate of an average of 60 times a minute. The SLED177 operates on 120V AC and features a green LED that signals the unit is receiving power. Inter- connectable with up to 18 devices, of which 12 can be smoke alarms. Other Contractor preferred features include a dust cover, easy twist-lock mounting bracket and a “Quick-Connect” wiring harness. 120V AC, 60Hz Wire-in LED STROBE LIGHT Listed to StandardUL 1971 ½ THE SIZE VERSUS STANDARDSTROBE ALARM ARCHITECTURAL AND ENGINEERING SPEC TECHNICAL SPECS UL 1971 Signaling Devices Light Dispersion Chart SHIPPING SPECS INSTALLATION OF ALARM The strobe light shall provide at a minimum the following features and functions: 1. A 177 candela LED strobe with synchronized flash. 2. The strobe light shall be powered by 120V AC. 3. The Smart Strobe shall have separate flash patterns to distinguish between smoke/heat and carbon monoxide dangers. 4. A visual LED (green) power-on indicator to confirm unit is receiving AC power. 5. The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and relative humidity between 10% and 90%. 6. The unit shall mount to any standard electrical box up to 4" octagonal without screw removal and shall be listed for ceiling or wall mounting. 7. The unit shall have a plug-in connector and be capable of interconnection of up to 18 multiple station alarms per NFPA 72. 8. The unit shall at a minimum meet the requirements of UL STD 1971, ADA, ANSI 117.1, CSFM, NFPA 72, NFPA 101 and the ICC. Alarm Dimensions: 5.3"dia. x 2.4"H Weight: 8.2 oz Operating Voltage: 120V AC 60Hz Operating Current: Alarm 0.8 A Temperature Range: 40°F (4°C) to 100°F (38°C) Humidity Range: 10% to 90% relative humidity (RH) Visual Alarm: 177 candela LED strobe Interconnections: Up to 18 units of First Alert or BRK Smoke, CO and Heat Alarms. Maximum number of 12 smoke alarms. See user’s manual for details. Strobe Light: 177 candela LED strobe Flash Rate: 1 Hz. Smoke Alarm: Constant approx. 1 flash per second. CO Alarm: Intermittent approx. 1 flash per second for four flashes, then 5 seconds off. Pattern is repeated. Indicator Lights/Sounds: AC Power: Constant Green LED Remote Alarm (Smoke): Steady flashing strobe and flashing Red LED Remote Alarm (CO): If this alarm interconnected to a BRK CO or Combo Alarm, then CO audio alarm, intermittent flashing strobe and Red LED OFF End of Life: 5 Green LED flashes once per minute Listing: Conforms to UL STD 1971 Individual Carton Dimensions 5.25"L x 3.0"W x 5.25"H Weight 0.51 lbs. Cube 0.05 ft3 UPC 0 29054 01803 8 Master Carton Dimensions 5.75"L x 19.13"W x 6.0"H Master Pack 6 Weight 3.5 lbs. Cube: 0.38 ft3 I2of5: 600 29054 01803 0 Pallet Information Cases per Layer 18 Number of Layers: 7 Cases per Pallet: 126 Units per Pallet: 756 Cube: 54.46 ft3 Weight: 478 lbs. ©2017 BRK Brands, Inc. All rights reserved. Distributed by BRK Brands, Inc. 3901 Liberty Street, Aurora, Illinois 60504. BRK Brands, Inc. is a subsidiary of Newell Brands Inc. (NYSE: NWL). First Alert is a registered trademark of the First Alert Trust. BRK is a registered trademark of BRK Brands, Inc. brkelectronics.com Installation of this smoke alarm must conform to all local electrical codes and Article 760 of the National Electrical Code (NFPA 70) and NFPA 72. Interconnected units must meet the following requirements: Total length of wire interconnecting units should be less than 1000 feet, be #18 gauge or larger and be rated at least 300V. It is recommended that all units be on the same fuse or circuit breaker. If local codes do not permit, be sure the neutral wire is common to both phases. CAT 1038510MODEL SLED177 FRONT VIEW MOUNTING BRACKET SIDE VIEW 5.3" 2.4" THE PARTS OF THIS ALARM 1. Mounting Bracket 2. Mounting Slots 3. Hot (Black) AC Wire 4. Neutral (White) AC Wire 5. Interconnect (Orange) Wire 6. Quick-Connect Power Connector 7. Turn this way to remove from bracket (Counterclockwise) 8. Turn this way to attach to bracket (Clockwise) 1. Strobe Light 2. Ceiling or Wall 3. Power Connector 4. Wire Nut 5. Junction Box 6. Neutral Wire (Wht) 7. Interconnect Wire (Orange) 8. Hot Wire (Blk) A. 120VAC 60 Hz source B. To additional units; Maximum = 18 total (Maximum 12 Smoke Alarms) 4 3 5 7 8 6 5 }A }B876 3 11 22 3 4 4 5 0909 Angle(In Degrees)PercentLight Intensity 05-2530-45505560657075808590 1009075554540353530302525 5454 0 90 90 45 45 0 WALL LIGHT LIGHT CEILING FIGURE 1: Light Output for Ceiling Mount FIGURE 2: Light Output for Wall Mount HPFF8, HPFF8CM, HPFF8E, HPFF8CME NAC Expander/Power Supply HPFF8pho.JPGHPFF8 HPFF8CM Description The Honeywell HPFF8(E) and HPFF8CM(E) are Notification Appliance Circuit (NAC) Expander Power Supplies designed to extend the power capabilities of existing NACs and provide power for auxiliary devices. The HPFF8 and HPFF8CM con- nects to any 12 or 24V Fire Alarm Control Panel (FACP) or operates stand-alone. They provide regulated and filtered 24VDC power to four NAC's and an auxiliary output. The NAC outputs are rated at 3.0 amps each and the auxiliary output is rated at 2.0 amps (this output is continuously supplied, even in alarm, and there- fore must be taken into account for power supply loading and battery size calculations). The combined output cannot exceed 8.0 amps. The HPFF8 and HPFF8CM provide independent output circuit supervision so in the event of a NAC fault they can notify the attached FACP. In addition they have a trouble memory fea- ture that displays past troubles (by NAC) for rapid diagnostics. Synchronization is built in for five appliance brands. The HPFF8 and HPFF8CM have two fully independent super- vised initiating circuits that can be used for synchronized strobes and coded horns. Their NAC outputs may be config- ured as any of the following: • four Class B (Style Y) •two Class A (Style Z) • two Class B and one Class A • four Class A with the optional HPP31076 Class A adapter These power supplies contain an internal Battery charger capable of charging up to 26.0 amp-hour (AH) batteries. The HPFF8 is mounted in a lockable wall cabinet that can accommodate up to two 18AH batteries. The HPFF8CM is designed to mount in Honeywell’s large equipment enclosure (EQBB-D4; order separately). Up to four HPFF8CM supplies can be mounted in a D-sized EQ cabinet. Each HPFF8CM can accommodate two 12AH batteries. One of the most challenging aspects of a retrofit application is locating the existing End-of-Line (EOL) resistor. In these appli- cations that have EOL values other than the 3.9k normally used with the HPFF8, a single resistor matching the existing EOL can be used as a reference for all the outputs. This fea- ture speeds installation and system checkout because the actual EOL does not need to be located and changed in the circuit. The reference resistor must be within the range of 1.9k to 25k. NOTE: 4 separate programming resistors for the HPFF8 are pro- vided in the hardware kit shipped with each HPFF8(E) and HPFF8CM(E). They are 3.9K (5 of these are provided, need only 1 for programming), 2.2K (1 each), 4.7K (1 each) and 10K (1 each) Features • Listed to UL Standard 864, 9th edition. • Four (4) power limited supervised notification application circuits (NAC's) capable of supplying +24VDC at 3.0 amp maximum each. • NAC output circuits may be configured as any of the follow- ing: –Four Class B (Style Y). –Two Class B & one Class A. –Two Class A (Style Z). –Four Class A (requires the HPP31076 Class A adapter). • Four field-programmable operational modes: –Pass-through. –Temporal generator. –Sync generator. –Pass-through Filtered. • Temporal coding and sync protocols compatible with the fol- lowing notification appliance brands: –System Sensor. –Faraday. –Amseco. –Cooper-Wheelock. –Gentex. • Protocol pass-through for synchronizing large systems. • Two fully independent supervised input/output control circuits. • Redundant activation operation for survivability. • Supports FACP’s Selectable Silence ability. • 2.0 amp auxiliary continuously supplied output. • Eight status LEDs. • Supervised AC input, battery voltage, auxiliary output, char- ger, and earth ground faults. • Trouble indication for supervision of the following: –NAC circuits. –Auxiliary output. –AC input. –Battery charger voltage. –Earth ground faults. • Optional two-hour delay for AC loss. Device Type Qty Total Qty Total IFP-300 Control Panel 1 x 0.190000 = 0.190000 1 x 0.250000 = 0.250000 IDP-PHOTO 0 x 0.000300 = 0 x 0.000300 = IDP-PHOTO-T 0 x 0.000300 = 0 x 0.000300 = IDP-PHOTOR 0 x 0.000300 = 0 x 0.000300 = IDP-ION 0 x 0.000300 = 0 x 0.000300 = IDP-HEAT 0 x 0.000300 = 0 x 0.000300 = IDP-HEAT-HT 0 x 0.000300 = 0 x 0.000300 = IDP-HEAT-ROR 0 x 0.000300 = 0 x 0.000300 = IDP-BEAM 0 x 0.002000 = 0 x 0.002000 = IDP-BEAM-T 0 x 0.002000 = 0 x 0.002000 = IDP-FIRE-CO 0 x 0.030000 = 0 x 0.007200 = IDP-ACCLIMATE 0 x 0.000300 = 0 x 0.000300 = IDP-CONTROL 0 x 0.000375 = 0 x 0.000375 = IDP-MONITOR 15 x 0.000375 = 0.005625 15 x 0.000375 = 0.005625 IDP-MINIMON 0 x 0.000375 = 0 x 0.000375 = IDP-PULL-SA 0 x 0.000375 = 0 x 0.000375 = IDP-PULL-DA 8 x 0.000375 = 0.003000 8 x 0.000375 = 0.003000 IDP-MONITOR-2 0 x 0.000750 = 0 x 0.000750 = IDP-MONITOR-10 0 x 0.003500 = 0 x 0.003500 = IDP-RELAY-6 0 x 0.001450 = 0 x 0.001450 = IDP-CONTROL-6 0 x 0.002250 = 0 x 0.002250 = IDP-RELAY 4 x 0.000255 = 0.001020 4 x 0.000255 = 0.001020 IDP-RELAYMON-2 0 x 0.001300 = 0 x 0.024000 = IDP-ZONE 0 x 0.002000 = 0 x 0.002000 = IDP-ZONE-6 0 x 0.002000 = 0 x 0.002000 = B200S 0 x 0.000300 = 0 x 0.000300 = B200S-LF 0 x 0.003000 = 0 x 0.000300 = B200SR 0 x 0.000300 = 0 x 0.000300 = B200SR-LF 0 x 0.001000 = 0 x 0.125000 = B224RB 0 x 0.000500 = 0 x 0.000500 = RTS151KEY 0 x 0.000000 = 0 x 0.007500 = RA100Z 1 x 0.000000 = 0.000000 1 x 0.010000 = 0.010000 IDP-CONTROL (Aux. Power) 0 x 0.001700 = 0 x 0.007000 = IDP-CONTROL-6 (Aux. Power) 0 x 0.008000 = 0 x 0.020000 = IDP-ZONE (Aux. Power) 0 x 0.012000 = 0 x 0.090000 = IDP-ZONE-6 (Aux. Power) 0 x 0.050000 = 0 x 0.270000 = B200S (Aux. Power) 0 x 0.000500 = 0 x 0.035000 = B200S-LF (Aux. Power) 0 x 0.000550 = 0 x 0.140000 = B200SR (Aux. Power) 0 x 0.000500 = 0 x 0.035000 = B200SR-LF (Aux. Power) 0 x 0.001000 = 0 x 0.125000 = IDP-ISO 0 x 0.000450 = 0 x 0.000450 = B224BI 0 x 0.000500 = 0 x 0.000500 = RA-2000 0 x 0.025000 = 0 x 0.050000 = RA-2000GRAY 0 x 0.025000 = 0 x 0.050000 = 6815 0 x 0.078000 = 0 x 0.078000 = RA-100 0 x 0.020000 = 0 x 0.025000 = RA-1000 0 x 0.020000 = 0 x 0.025000 = RA-1000R 0 x 0.020000 = 0 x 0.025000 = 5824 0 x 0.045000 = 0 x 0.045000 = 5496 0 x 0.010000 = 0 x 0.010000 = 7. Accessory Modules 1. Control Panel 2. Addressable SLC Devices 3. Addressable SLC Detectors 4. SLC Accessories 5. Auxiliary Power Draw - SLC Devices 6. SLC Isolator Devices IFP-300 Battery Calculation Building #1 Secondary Power Source Requirements Standby Current (amps) Secondary Alarm Current (amps) Current Draw Current Draw Silent Knight by Honeywell Page 1 4/15/2021 RPS-1000 0 x 0.010000 = 0 x 0.010000 = 5865-4 0 x 0.035000 = 0 x 0.145000 = 5865-3 0 x 0.035000 = 0 x 0.145000 = 5880 0 x 0.035000 = 0 x 0.200000 = 5883 0 x 0.000000 = 0 x 0.220000 = SK-NIC 0 x 0.021000 = 0 x 0.021000 = SK-FML 0 x 0.053000 = 0 x 0.053000 = SK-FSL 0 x 0.079000 = 0 x 0.079000 = IPDACT-2 0 x 0.093000 = 0 x 0.136000 = IPDACT-2UD 0 x 0.098000 = 0 x 0.155000 = CELL-MOD 0 x 0.055000 = 0 x 0.100000 = CELL-CAB-SK 0 x 0.055000 = 0 x 0.100000 = Conventional Detectors 0 x 0.000000 = 0 x 0.000000 = IDP-HEAT-IV 3 x 0.000300 = 0.000900 3 x 0.000000 = 0.000000 IDP-PHOTO-W 20 x 0.000300 = 0.006000 20 x 0.000000 = 0.000000 Miscellaneous Device 3 0 x 0.000000 = 0 x 0.000000 = Miscellaneous Device 4 0 x 0.000000 = 0 x 0.000000 = Miscellaneous Device 5 0 x 0.000000 = 0 x 0.000000 = NAC 1 0.000000 = 0.053500 = 0.053500 NAC 2 0.000000 = 0.000000 = NAC 3 0.000000 = 0.000000 = NAC 4 0.000000 = 0.000000 = 0.206545 0.323145 8. Network Cards 9. Auxiliary Devices 10. Miscellaneous Devices 11. Output Circuits Total Standby Load Total Alarm Load Silent Knight by Honeywell Page 2 4/15/2021 Note 2: Use the dropdowns in the yellow cells to enter values. x = 4.957 AH x = 0.027 AH 4.984 AH = x 1.20 5.98 AH Circuit#4 current is within the limitations of the circuit. IFP-300 Control Panel: The output current is within the panel's limitations. The batteries can be housed in the IFP-300 Cabinet. Current Draw Check Circuit#1 current is within the limitations of the circuit. Circuit#2 current is within the limitations of the circuit. Circuit#3 current is within the limitations of the circuit. Total Ampere Hours Required Recommended Batteries: BAT-1270 - 7AH Batteries Battery Check The batteries can be charged by the IFP-300 Charger. Alarm Load Current (Amps) 0.32315 Amps 0.084 Total Current Load Multiply by the Derating Factor 1.2 Standby Load Current 0.20655 Amps 24 Required Alarm Time in Minutes 5 Minutes IFP-300 Battery Calculation Note 1: You are fully responsible for verifying these calculations. Calculation in Total Sheet Required Standby Time in Hours 24 Hours Silent Knight by Honeywell Page 3 4/15/2021 Device Type Qty Total Qty Total IFP-300 Control Panel 1 x 0.190000 = 0.190000 1 x 0.250000 = 0.250000 IDP-PHOTO 0 x 0.000300 = 0 x 0.000300 = IDP-PHOTO-T 0 x 0.000300 = 0 x 0.000300 = IDP-PHOTOR 0 x 0.000300 = 0 x 0.000300 = IDP-ION 0 x 0.000300 = 0 x 0.000300 = IDP-HEAT 0 x 0.000300 = 0 x 0.000300 = IDP-HEAT-HT 0 x 0.000300 = 0 x 0.000300 = IDP-HEAT-ROR 0 x 0.000300 = 0 x 0.000300 = IDP-BEAM 0 x 0.002000 = 0 x 0.002000 = IDP-BEAM-T 0 x 0.002000 = 0 x 0.002000 = IDP-FIRE-CO 0 x 0.030000 = 0 x 0.007200 = IDP-ACCLIMATE 0 x 0.000300 = 0 x 0.000300 = IDP-CONTROL 0 x 0.000375 = 0 x 0.000375 = IDP-MONITOR 15 x 0.000375 = 0.005625 15 x 0.000375 = 0.005625 IDP-MINIMON 0 x 0.000375 = 0 x 0.000375 = IDP-PULL-SA 0 x 0.000375 = 0 x 0.000375 = IDP-PULL-DA 8 x 0.000375 = 0.003000 8 x 0.000375 = 0.003000 IDP-MONITOR-2 0 x 0.000750 = 0 x 0.000750 = IDP-MONITOR-10 0 x 0.003500 = 0 x 0.003500 = IDP-RELAY-6 0 x 0.001450 = 0 x 0.001450 = IDP-CONTROL-6 0 x 0.002250 = 0 x 0.002250 = IDP-RELAY 4 x 0.000255 = 0.001020 4 x 0.000255 = 0.001020 IDP-RELAYMON-2 0 x 0.001300 = 0 x 0.024000 = IDP-ZONE 0 x 0.002000 = 0 x 0.002000 = IDP-ZONE-6 0 x 0.002000 = 0 x 0.002000 = B200S 0 x 0.000300 = 0 x 0.000300 = B200S-LF 0 x 0.003000 = 0 x 0.000300 = B200SR 0 x 0.000300 = 0 x 0.000300 = B200SR-LF 0 x 0.001000 = 0 x 0.125000 = B224RB 0 x 0.000500 = 0 x 0.000500 = RTS151KEY 0 x 0.000000 = 0 x 0.007500 = RA100Z 0 x 0.000000 = 0 x 0.010000 = IDP-CONTROL (Aux. Power) 0 x 0.001700 = 0 x 0.007000 = IDP-CONTROL-6 (Aux. Power) 0 x 0.008000 = 0 x 0.020000 = IDP-ZONE (Aux. Power) 0 x 0.012000 = 0 x 0.090000 = IDP-ZONE-6 (Aux. Power) 0 x 0.050000 = 0 x 0.270000 = B200S (Aux. Power) 0 x 0.000500 = 0 x 0.035000 = B200S-LF (Aux. Power) 0 x 0.000550 = 0 x 0.140000 = B200SR (Aux. Power) 0 x 0.000500 = 0 x 0.035000 = B200SR-LF (Aux. Power) 0 x 0.001000 = 0 x 0.125000 = IDP-ISO 0 x 0.000450 = 0 x 0.000450 = B224BI 0 x 0.000500 = 0 x 0.000500 = RA-2000 0 x 0.025000 = 0 x 0.050000 = RA-2000GRAY 0 x 0.025000 = 0 x 0.050000 = 6815 0 x 0.078000 = 0 x 0.078000 = RA-100 0 x 0.020000 = 0 x 0.025000 = RA-1000 0 x 0.020000 = 0 x 0.025000 = RA-1000R 0 x 0.020000 = 0 x 0.025000 = 5824 0 x 0.045000 = 0 x 0.045000 = 5496 0 x 0.010000 = 0 x 0.010000 = 7. Accessory Modules 1. Control Panel 2. Addressable SLC Devices 3. Addressable SLC Detectors 4. SLC Accessories 5. Auxiliary Power Draw - SLC Devices 6. SLC Isolator Devices IFP-300 Battery Calculation Building #2 Secondary Power Source Requirements Standby Current (amps) Secondary Alarm Current (amps) Current Draw Current Draw Silent Knight by Honeywell Page 1 4/15/2021 RPS-1000 0 x 0.010000 = 0 x 0.010000 = 5865-4 0 x 0.035000 = 0 x 0.145000 = 5865-3 0 x 0.035000 = 0 x 0.145000 = 5880 0 x 0.035000 = 0 x 0.200000 = 5883 0 x 0.000000 = 0 x 0.220000 = SK-NIC 0 x 0.021000 = 0 x 0.021000 = SK-FML 0 x 0.053000 = 0 x 0.053000 = SK-FSL 0 x 0.079000 = 0 x 0.079000 = IPDACT-2 0 x 0.093000 = 0 x 0.136000 = IPDACT-2UD 0 x 0.098000 = 0 x 0.155000 = CELL-MOD 0 x 0.055000 = 0 x 0.100000 = CELL-CAB-SK 0 x 0.055000 = 0 x 0.100000 = Conventional Detectors 0 x 0.000000 = 0 x 0.000000 = IDP-HEAT-IV 3 x 0.000300 = 0.000900 3 x 0.000000 = 0.000000 IDP-PHOTO-W 20 x 0.000300 = 0.006000 20 x 0.000000 = 0.000000 Miscellaneous Device 3 0 x 0.000000 = 0 x 0.000000 = Miscellaneous Device 4 0 x 0.000000 = 0 x 0.000000 = Miscellaneous Device 5 0 x 0.000000 = 0 x 0.000000 = NAC 1 0.000000 = 0.053500 = 0.053500 NAC 2 0.000000 = 0.000000 = NAC 3 0.000000 = 0.000000 = NAC 4 0.000000 = 0.000000 = 0.206545 0.313145 8. Network Cards 9. Auxiliary Devices 10. Miscellaneous Devices 11. Output Circuits Total Standby Load Total Alarm Load Silent Knight by Honeywell Page 2 4/15/2021 Note 2: Use the dropdowns in the yellow cells to enter values. x = 4.957 AH x = 0.026 AH 4.983 AH = x 1.20 5.98 AH Circuit#4 current is within the limitations of the circuit. IFP-300 Control Panel: The output current is within the panel's limitations. The batteries can be housed in the IFP-300 Cabinet. Current Draw Check Circuit#1 current is within the limitations of the circuit. Circuit#2 current is within the limitations of the circuit. Circuit#3 current is within the limitations of the circuit. Total Ampere Hours Required Recommended Batteries: BAT-1270 - 7AH Batteries Battery Check The batteries can be charged by the IFP-300 Charger. Alarm Load Current (Amps) 0.31315 Amps 0.084 Total Current Load Multiply by the Derating Factor 1.2 Standby Load Current 0.20655 Amps 24 Required Alarm Time in Minutes 5 Minutes IFP-300 Battery Calculation Note 1: You are fully responsible for verifying these calculations. Calculation in Total Sheet Required Standby Time in Hours 24 Hours Silent Knight by Honeywell Page 3 4/15/2021 Device Qty Total Qty Total SSM24-6 1 x 0.000000 = 0.000000 1 x 0.053500 = 0.053500 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0.000000 0.053500 Device Qty Total Qty Total 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0.000000 0.000000 Device Qty Total Qty Total 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0.000000 0.000000 Device Qty Total Qty Total 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0.000000 0.000000 Non-Alarm Draw Alarm Draw Total Standby Load Total Alarm Load NAC 3 Non-Alarm Draw Alarm Draw Total Standby Load Total Alarm Load NAC 4 Total Standby Load Total Alarm Load NAC 2 Non-Alarm Draw Alarm Draw Total Standby Load Total Alarm Load IFP-300 Circuit Detail NAC 1 Non-Alarm Draw Alarm Draw Silent Knight by Honeywell Page 4 4/15/2021 Device Qty Total Qty Total SSM24-6 1 x 0.000000 = 0.000000 1 x 0.053500 = 0.053500 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0.000000 0.053500 Device Qty Total Qty Total 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0.000000 0.000000 Device Qty Total Qty Total 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0.000000 0.000000 Device Qty Total Qty Total 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0 x 0.000000 = 0.000000 0.000000 Non-Alarm Draw Alarm Draw Total Standby Load Total Alarm Load NAC 3 Non-Alarm Draw Alarm Draw Total Standby Load Total Alarm Load NAC 4 Total Standby Load Total Alarm Load NAC 2 Non-Alarm Draw Alarm Draw Total Standby Load Total Alarm Load IFP-300 Circuit Detail NAC 1 Non-Alarm Draw Alarm Draw Silent Knight by Honeywell Page 4 4/15/2021 Standby 0.075 A Alarm 7.782 A Qty Draw Non-Alarm Qty Draw Alarm 1 x 0.07500 0.07500 1 x 0.20600 0.20600 7 x 0.00000 0.00000 7 x 0.07300 0.51100 10 x 0.00000 0.00000 10 x 0.02900 0.29000 5 x 0.00000 0.00000 5 x 0.15300 0.76500 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0.00000 1.56600 15 x 0.00000 0.00000 15 x 0.15300 2.29500 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0.00000 2.29500 15 x 0.00000 0.00000 15 x 0.15300 2.29500 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0.00000 2.29500 5 x 0.00000 0.00000 5 x 0.15300 0.76500 10 x 0.00000 0.00000 10 x 0.02900 0.29000 5 x 0.00000 0.00000 5 x 0.07300 0.36500 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0.00000 1.42000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0.00000 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000Other compatible devices 7. Compatible Devices not listed 0.075 6. Auxiliary Power Auxiliary Device Auxiliary Device Auxiliary Device Auxiliary Device Auxiliary Device Total Alarm Load: 4. NAC #3 HW-LF TB4 Totals (Max 2 Amps): HW-LF MHW P2RL15 NAC #4 Totals (Max 3 Amps): Other compatible devices Other compatible devices Total Non-Alarm Load: 3. NAC #2 NAC #1 Totals (Max 3 Amps): Secondary Alarm CurrentSecondary Non-Alarm Current 1. System Modules 2. NAC #1 HPFF8 Main Circuit Board 7.782 System Current Draw FF8-BUILDING 1 Total Current 0 0 NAC #2 Totals (Max 3 Amps): Device HW-LF 0 NAC #3 Totals (Max 3 Amps): 5. NAC #4 P2RL15 MHW HW-LF Standby 0.075 A Alarm 6.863 A Qty Draw Non-Alarm Qty Draw Alarm 1 x 0.07500 0.07500 1 x 0.20600 0.20600 11 x 0.00000 0.00000 11 x 0.07300 0.80300 2 x 0.00000 0.00000 2 x 0.04300 0.08600 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0.00000 0.88900 15 x 0.00000 0.00000 15 x 0.15300 2.29500 9 x 0.00000 0.00000 9 x 0.02900 0.26100 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0.00000 2.55600 17 x 0.00000 0.00000 17 x 0.15300 2.60100 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0.00000 2.60100 4 x 0.00000 0.00000 4 x 0.07300 0.29200 11 x 0.00000 0.00000 11 x 0.02900 0.31900 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0.00000 0.61100 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0.00000 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 0 x 0.00000 NAC #3 Totals (Max 3 Amps): 5. NAC #4 P2RL15 SRL15 NAC #2 Totals (Max 3 Amps): Device HW-LF 0 6.863 System Current Draw FF8-BUILDING 2 Total Current MHW 0 Secondary Alarm CurrentSecondary Non-Alarm Current 1. System Modules 2. NAC #1 HPFF8 Main Circuit Board Other compatible devices Other compatible devices Total Non-Alarm Load: 3. NAC #2 NAC #1 Totals (Max 3 Amps): MHW NAC #4 Totals (Max 3 Amps): 4. NAC #3 HW-LF TB4 Totals (Max 2 Amps): P2RL15 Other compatible devices 7. Compatible Devices not listed 0.075 6. Auxiliary Power Auxiliary Device Auxiliary Device Auxiliary Device Auxiliary Device Auxiliary Device Total Alarm Load: FIRE ALARM GENERAL NOTES1.FIRE ALARM INSTALLATION SHALL COMPLY WITH ALL LOCALCODES AND REGULATIONS AND BE INSTALLED ACCORDING TOMANUFACTURERS INSTRUCTIONS.2.ALL FIRE ALARM RACEWAY SIZES AND CIRCUITRYREQUIREMENTS SHALL BE IN ACCORDANCE WITH APPLICABLECODES AND MANUFACTURERS RECOMMENDATIONS3.PROVIDE 120V 20A DEDICATED CIRCUIT TO CONTROL PANELS,POWER SUPPLIES, ETC AS NEEDED. CIRCUIT BREAKERS SHALLBE EQUIPPED WITH LOCKS TO PREVENT ACCIDENTAL SHUT OFFAND BE CLEARLY MARKED "FIRE ALARM CIRCUIT"4.WIRING SHALL BE COLOR CODED ACCORDING TO ALLAPPLICABLE CODES AND SHALL BE MAINTAINED THROUGHOUTTHE ENTIRE SYSTEM5.ALL WIRING SHALL BE CHECKED AND TESTED TO ENSURETHERE ARE NO OPEN OR GROUND CONDITION PRIOR TOENERGIZING SYSTEM6.ALL STROBES SHALL BE SYNCHRONIZED AT THE END OFCONSTRUCTION7.SMOKE DETECTORS HEADS SHALL NOT BE INSTALLED UNTILAFTER THE CONSTRUCTION CLEANUP OF ALL TRADES ISCOMPLETE AND FINAL IN ACCORDANCE WITH NFPA 72SSH135°FTYPICAL CLASS "A" SIGNALCIRCUIT WIRING24V+24V+24V-24V-SLC CIRCUIT FROMCONTROL PANEL ORPREVIOUS DEVICERETURN LOOPFIREFIREDOORPULLSTATIONFIREALARMCONTROLPANELANNUNCIATORCENTRALSTATIONEXAMPLE OF FIRE ALARMDEVICE MOUNTING HEIGHTSCEILINGFLOOR5'0"46"80-96"6'0"5'0"4'0"6" MinimumFIRE ALARM LEGENDSDDSDLSDCOLHCOWPWPCREDBMMFSTSPSFACPFPSFMAMPRAIRTSARMRBMBISOSALFCMSmoke Detector Analog addressable"R" elevator recallExterior BeaconFlow SwitchTamper SwitchFire Alarm Control PanelRemote Annunciator Symbol DescriptionRemote Test StationPower SupplyPressure SwitchRemote Alarm IndicatorAddressable Relay ModulePull Station - dual action addressableDuct Smoke DetectorSmoke Alarm - local, 120 VAC/VDC TandemCO Detector, 24 VDC Ceiling MountedStrobe Only Unit - ceilingmountedCombination Smoke/CO Alarm- local,120 VAC/VDC TandemMini Monitor ModuleStrobe Only UnitLow Frequency SounderEmergency Voice Evacuation Control PanelRadio BoxSix Relay ModuleMonitor ModuleHorn/Strobe Unit - weatherproofStrobe Only Unit - weatherproofBellSmoke Detector"R" elevator recallHeat Detector - Analog Addressable ROR Rate ofRise, F-fixed Temp, 135 or 190 Degree FahrenheitHorn/Strobe UnitIsolation ModuleDitek-120hw Surge ArrestorLow Frequency Sounder with Strobe"CO" INDICATES AMBER STROBE ONLY DEVICE FOR CO ANNUNCIATIONControl ModuleLFSSSmoke Alarm- local, strobeSLSMaster BoxFZMMBSupervised Addressable Zone ModuleWPSpeaker Strobe OnlySpeaker Strobe Only - weatherproofMMini HornCombination Smoke/CO Detector -Addressable With Intelligent Sounder BaseCHorn/Strobe Unit - "C" indicating ceiling mountedTYPICAL ADDRESSABLE DUCT DETECTORREMOTE TEST SWITCH WIRINGLOCATION TO BE DETERMINED BY AHJ SPECIFICATIONSDDSLC INSLC OUTRTSFA 16/4 FPLRMOUNTS TO STANDARDSINGLE GANG BOXCOSDARM-6KKnox BoxFINPUT OUTPUT SCHEDULE1Manual Alarm Boxes2Smoke Detectors3In Duct Smoke Detector4Heat Detectors5Waterflow6Sprinkler Tamper Switch7Sprinkler Pressure Switch8FACP Ground Fault9FACP AC Power Failure10FACP Battery FailureSLC Open Circu itSLC Ground FaultNAC ShortNAC OpenNAC Ground FaultAnnunciator Communications FailurePower Supply AC LossABCDEFGHIJKLMNOPQRST11121314151617Actuate Common Alarm Signal Indicator Actuate A/V Alarm Signals Actuate Common Supervisory Signal Indicator Actuate Audible Supervisory Signal Actuate Common Trouble Signal Indicator Actuate Audible Common Trouble Signal Transmit Fire Alarm Signal to FD Transmit Supervisory Signal to Supervising Station Release Magnetically Held Smoke Doors Activate Elevator Recall Control Unit AnnunciationNotificationRequired Fire Safety ControlSupplementaryTransmit Trouble Signal to Supervising StationxDisplay Change of Status on Remote Annunciator UPower Supply Battery Failure1819xxxxxxxxxxxxxxxxxxxxxxxxxxxxxActivate HVAC Control20 Activate CO Cadence21xxxxxxxxxxxxxxxxxx Activate Sprinkler Bell Activate Fire Alarm BeaconxxxxxElevator Lobby Smoke DetectorxxxxxxxxxxxxxxxxxxxxSCALEDRAWNBYCHECKEDBYDATEDATEREVISION/ISSUEN.T.SG.J.EK.S.PTITLE PAGEFA-00Fire Technologies70 Corporate Park Dr iveUnit #1215Pembroke, MA 02359Engineered System Distr ibutorsELECTRICAL CONTRACTOR:1 4 /14/2021 K.S .P4/14/21YARMOUTHGARDENS497 ROUTE 28WEST YARMOUTH, MA4/14/21GLYNNelectric UPBR 1BR2BR3LIVING / DININGUNIT 1-03TYPE DSTOR.LIVING / DININGUNIT 1-01TYPE FBR 2LIVING / DININGUNIT 1-04TYPE D-1BR 3W.I.C.STOR.BR 1BR 2VESTIBULEVESTIBULECL.LIVING / DININGUNIT 1-08TYPE C4CL.CORRIDORSTAIR 1-3CORRIDORLIVING / DININGUNIT 1-02TYPE EBR 1BR 2BR 1KITCHENPV CLOSETSTAIREQUIP.BR 1BR 2LAUNDRYKITCHENSTOR.W.I.C.CL.BATHBATH 2CL.KITCHENSTORBATHBR1BR2LIVING/DININGUNIT 1-06TYPE CKITCHENKITCHENKITCHENKITCHENLIVING/DININGUNIT 1-05TYPE CLIVING/DININGUNIT 1-07TYPE CBR2BR1STORSTORBATH 1BR2BR1STORBATHBATHBATHSTORBR1BATH 2LIVING/DININGUNIT 1-09TYPE AKITCHENMECHANICALBATH 1KITCHENBATHBATHBATHBR 1LIVING-DININGUNIT 1-10KITCHENSTOR.STOR.JAN.LFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFMMMMMMMMMMBSCALEDRAWNBYCHECKEDBYDATEDATEREVISION/ISSUENOTEDG.J.EK.S.PFLOOR PLANFA-01Fire Technologies70 Corporate Park DriveUnit #1215Pembroke, MA 02359Engineered System DistributorsELECTRICAL CONTRACTOR:GLYNNelectric1 4/14/2021 K.S.P4/14/21YARMOUTHGARDENSBUILDING-1497 ROUTE 28WEST YARMOUTH, MA4/14/21GLYNNelectric DNLIVING / DININGUNIT 1-11TYPE F-1LIVING / DININGUNIT 1-13TYPE DBR 1BR 3BATHBR1STORLIVING / DININGUNIT 1-17TYPE CBR2BR1LIVING / DININGUNIT 1-19TYPE AKITCHENSTOR.BATHSTORSTOR.BR2LIVING/ DININGUNIT 1-14TYPE DBR1BR2BR2CL.BR 2BR 2BR 1BR2LIVING/DININGUNIT 1-15TYPE CLIVING/DININGUNIT 1-16TYPE CBR2BR1LAUNDRYCL.CL.BR 1BATHCL.KITCHENCL.CORRIDORCORRIDORSTAIR 1-3BATHKITCHENSTAIRLIVING/DININGUNIT 1-18TYPE C4BATH 2STOR.BR1STORBATHSTORLIVING/DININGUNIT 1-12KITCHENBR2BR3BR1WICJAN.KITCHENKITCHENBATH 1BATH 2STORBATH 1BATHBATHKITCHENKITCHENKITCHENSTORLIVING/DININGUNIT 1-120STORBR1BATHKITCHENLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFMMMMMMMMMMSCALEDRAWNBYCHECKEDBYDATEDATEREVISION/ISSUENOTEDG.J.EK.S.PFLOOR PLANFA-02Fire Technologies70 Corporate Park DriveUnit #1215Pembroke, MA 02359Engineered System DistributorsELECTRICAL CONTRACTOR:GLYNNelectric1 4/14/2021 K.S.P4/14/21YARMOUTHGARDENSBUILDING-1497 ROUTE 28WEST YARMOUTH, MA4/14/21 IFP-300FACPW/ 2-12V 18AH SLALOCATED INELECTRICAL 112EFFFFFFFBFF8 POWER SUPPLYW/ 2-12V 7AH SLAELOCATED PER ECFPS-12ND FLOOR1ST FLOORLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFMMMMMMMMMMLFLFLFLFLFS01SCORR.S02SCORR.S03SCORR.S04SCORR.S05SCORR.S06SCORR.S07SCORR.S08SCORR.M01FM02FM03FM04FMM05TSMM06TSMM07TSMM08TSMM09TSMM10TSMM11TSCORR.CORR.CORR.CORR.MM12PSMM13PSMM14FSMM15FSMM16FSS09HMECH.S10HLAUNDRYSPVCLST.S11SCLST.S12SJAN.CLST.S13S20SCORR.S19SCORR.S18SCORR.S17SCORR.S16SCORR.S15SCORR.S14SCORR.M20FM19FM18FM17FCORR.CORR.CORR.CORR.SJAN.CLST.S21MMMMMMMMMMBREDBBSPRINKLERBELLBFFFFFEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMASCALEDRAWNBYCHECKEDBYDATEDATEREVISION/ISSUENOTEDG.J.EK.S.PRISER DIAGRAMFA-04Fire Technologies70 Corporate Park DriveUnit #1215Pembroke, MA 02359Engineered System DistributorsELECTRICAL CONTRACTOR:ABDESIGNATIONCIRCUITTYPEWIRETYPECIRCLASSCOLORCODEWIRELEGENDSIGNALING LINE CIRCUIT (SLCLOOP)#16 AWG 2 CONDUCTORCLASS ARED(+)BLACK(-)CIRSTYLE0NOTIFICATION ALARM (NAC)#14 AWG 2 CONDUCTORCLASS ABLUE(+)WHITE(-)0EACFEED#12AWG 3 CONDUCTORSNANABLACK(+)WHITE(-)GREEN(GRD)CMONITORING CONTROL#16AWG 4 CONDUCTORCLASS A0RED(+)BLACK(-)DSBUS#16AWG 4 CONDUCTORCLASS B0RED,BLACK,GREEN,YELLOWITELECOMCONNECTIONCAT-5ENANAPERCAT-5ESPECIFICATIONJSPEAKER CIRCUIT#14 AWG 2 C. SHIELDED TWISTEDAOBLUE(+)WHITE(-)AMPLIFIER VBUS#16 AWG 4 C. SHIELDED TWISTEDAOBLUE(+)WHITE(-)VGLYNNelectricGLYNNelectric1 4/14/2021 K.S.P4/14/21YARMOUTHGARDENSBUILDING-1497 ROUTE 28WEST YARMOUTH, MA4/14/21 UPBR 2LIVING / DININGUNIT 2-02TYPE IBR 1LAUNDRYVESTIBULECOMMUNITYROOMRRRRRRLIVING / DININGUNIT 2-06TYPE C3LIVING / DININGUNIT 2-04TYPE C2BR1ELEC.LIVING / DININGUNIT 2-05TYPE CLIVING / DININGUNIT 2-07TYPE C1LIVING / DININGUNIT 2-09TYPE BSTAIR 2 - 3CORRIDORBR1BR2BR1BR2BR1BR1BR2STAIR 2 - 1CORRIDORWOMEN'SMANAGEMENTOFFICECLLIVING / DININGUNIT 2-08TYPE AELEVBR2MEN'SMACHINEROOMBATHCL.W.I.C.STOR.BATHSTOR.BATHBATHKITCHENLIN.STOR.VESTIBULEKITCHENCL.CL.CL.LIVING / DININGUNIT 2-01GROUP 1TYPE JCL.CLCL.CL.CL.CL.CL.KITCHENLOBBYBR1ELEVLOBBYSTOR BR2BR1KITCHENBATHLIVINGUNIT 2-03TYPE HGROUP 2ABATHKITCHENJAN.RKITCHENSTOR.STORKITCHENBR1BATHCLOSETKITCHENSTORSTORSTOR.KITCHENBATHKITCHENSTOR LFLFLFLFLFLFLFLFLFLFLFLFLFLFLFMMMMMMMMMBSCALEDRAWNBYCHECKEDBYDATEDATEREVISION/ISSUENOTEDG.J.EK.S.PFLOOR PLANFA-01Fire Technologies70 Corporate Park DriveUnit #1215Pembroke, MA 02359Engineered System DistributorsELECTRICAL CONTRACTOR:GLYNNelectric1 4/14/2021 K.S.P4/14/21YARMOUTHGARDENSBUILDING-2497 ROUTE 28WEST YARMOUTH, MA4/14/21GLYNNelectric DNCL.BROPEN TOBELOWROOFRRRRRRLIVING / DININGUNIT 2-14TYPE ILIVING / DININGUNIT 2-15TYPE CLIVING / DININGUNIT 2-17TYPE C1LIVING / DININGUNIT 2-18TYPE C3LIVING / DININGUNIT 2-20TYPE ABR1BR2BR1BR1BR2BR1BR2BR1BR1BR1BR1BR1BR2BATHKITCHENSTOR.BATHCL.BATHW.I.C.KITCHENBATHSTOR.KITCHENKITCHENBATHSTORW.I.C.W.I.C.BATHSTOR.KITCHENCL.LIVING/DININGUNIT 2-11ROOFCORRIDORELEVLOBBYSTAIRCORRIDORKITCHENLIVING / DININGUNIT 2-16TYPE C3BRSTORKITCHENLIVINGUNIT 2-13TYPE HGROUP 2ASTORKITCHENBATHBATHLIVING / DININGUNIT 2-10GROUP 1TYPE JSTOR.BATHKITCHENSTORBATHLIVING / DININGUNIT 2-12STORLIVING / DININGUNIT 2-19TYPE BSTORBR2BR1BATHKITCHENLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFMMMMMMMMMMMSCALEDRAWNBYCHECKEDBYDATEDATEREVISION/ISSUENOTEDG.J.EK.S.PFLOOR PLANFA-01Fire Technologies70 Corporate Park DriveUnit #1215Pembroke, MA 02359Engineered System DistributorsELECTRICAL CONTRACTOR:GLYNNelectric1 4/14/2021 K.S.P4/14/21YARMOUTHGARDENSBUILDING-2497 ROUTE 28WEST YARMOUTH, MA4/14/21GLYNNelectric IFP-300FACPW/ 2-12V 18AH SLALOCATED INELECTRICAL 112EFFFFFFFBFF8 POWER SUPPLYW/ 2-12V 7AH SLAELOCATED PER ECFPS-12ND FLOOR1ST FLOORLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFLFS02SCORR.S03SCORR.S04SCORR.S05SCORR.S06SCORR.S07SCORR.S08SCORR.S09SCORR.M02FM03FM04FMM05TSMM06TSMM07TSMM08TSMM09TSMM10TSMM11TSCORR.CORR.CORR.EQUIP.ROOMMM12PSMM13PSMM14FSMM15FSMM16FSMMMMMMMMMMBREDBBSPRINKLERBELLBFFFFMMMMMMMMMFFFFLFLFMM01FVESTIBULES01SLOBBYS10HS11SEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMEQUIP.ROOMS12HLAUNDRYM17FCOMMUNITYROOMS13SS14HCOMMUNITYROOMCOMMUNITYRM. KITCHENSCOMMUNITYRM. CLST.S15SELEC.CLST.S16SLIN.CLST.S17ARMARMARMARMELEV EQ.ROOMELEV EQ.ROOMELEV EQ.ROOMELEV EQ.ROOMELEV EQ.ROOMS24SCORR.S23SCORR.S22SCORR.S21SCORR.S20SCORR.S19SCORR.S18SCORR.M19FM18FCORR.CORR.ASCALEDRAWNBYCHECKEDBYDATEDATEREVISION/ISSUENOTEDG.J.EK.S.PRISER DIAGRAMFA-04Fire Technologies70 Corporate Park DriveUnit #1215Pembroke, MA 02359Engineered System DistributorsELECTRICAL CONTRACTOR:ABDESIGNATIONCIRCUITTYPEWIRETYPECIRCLASSCOLORCODEWIRELEGENDSIGNALING LINE CIRCUIT (SLCLOOP)#16 AWG 2 CONDUCTORCLASS ARED(+)BLACK(-)CIRSTYLE0NOTIFICATION ALARM (NAC)#14 AWG 2 CONDUCTORCLASS ABLUE(+)WHITE(-)0EACFEED#12AWG 3 CONDUCTORSNANABLACK(+)WHITE(-)GREEN(GRD)CMONITORING CONTROL#16AWG 4 CONDUCTORCLASS A0RED(+)BLACK(-)DSBUS#16AWG 4 CONDUCTORCLASS B0RED,BLACK,GREEN,YELLOWITELECOMCONNECTIONCAT-5ENANAPERCAT-5ESPECIFICATIONJSPEAKER CIRCUIT#14 AWG 2 C. SHIELDED TWISTEDAOBLUE(+)WHITE(-)AMPLIFIER VBUS#16 AWG 4 C. SHIELDED TWISTEDAOBLUE(+)WHITE(-)VGLYNNelectricGLYNNelectric1 4/14/2021 K.S.P4/14/21YARMOUTHGARDENSBUILDING-2497 ROUTE 28WEST YARMOUTH, MA4/14/21