HomeMy WebLinkAbout10-2123-Cubicle-Curtains-And-Track_Rev_1Dennis Yarmouth Intermediate Middle School January 19, 2021
Dennis Yarmouth Regional School District 100% Construction Documents
Perkins Eastman DPC, project #71011
CUBICLE CURTAINS AND TRACK
10 2123 - 1
SECTION 10 2123
CUBICLE CURTAINS AND TRACK
PART 1 - GENERAL
1.1 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and Division 01 Specification Sections, apply to this Section.
1.2 SUMMARY
A. Section Includes:
1. Cubicle-curtain tracks and carriers.
2. Cubicle curtains.
B. Related Requirements:
1. Section 06 1000 "Rough Carpentry" for wood blocking for mounting items requiring
anchorage.
2. Section 09 2216 "Non-Structural Metal Framing" for supplementary metal framing and
blocking for mounting items requiring anchorage.
1.3 ACTION SUBMITTALS
A. Make Submittals in accordance with Section 01 3300 “Submittal Procedures.”
B. Product Data: For each type of product.
1. For each type of curtain fabric indicated, include durability, laundry temperature limits,
fade resistance, applied curtain treatments, and fire-test-response characteristics.
C. Shop Drawings: For curtains and tracks.
1. Show layout and types of cubicles, sizes of curtains, number of carriers, anchorage
details, and conditions requiring accessories. Indicate dimensions taken from field
measurements.
2. Include details of blocking for track support.
D. Samples for Verification: For each type of product required, prepared on Samples of size
indicated below:
1. Curtain Fabric: Not less than 10 inches square and showing complete pattern repeat,
from dye lot used for the Work, with specified treatments applied. Mark top and face of
material.
2. Mesh Top: Not less than 10 inches square.
3. Curtain Track: Not less than 10 inches long.
4. Curtain Carrier: Full-size unit.
E. Product Schedule: For curtains and tracks. Use same designations indicated on Drawings.
Dennis Yarmouth Intermediate Middle School January 19, 2021
Dennis Yarmouth Regional School District 100% Construction Documents
Perkins Eastman DPC, project #71011
CUBICLE CURTAINS AND TRACK
10 2123 - 2
1.4 CLOSEOUT SUBMITTALS
A. Operation and Maintenance Data: For curtains, tracks, and hardware to include in operation
and maintenance manuals.
1.5 MAINTENANCE MATERIAL SUBMITTALS
A. Furnish extra materials described below that match products installed and that are packaged
with protective covering for storage and identified with labels describing contents.
1. Curtain Carriers and Track End Caps: Full-size units equal to 3 percent of amount
installed for each size indicated, but no fewer than 10 units.
2. Curtains: Full-size units equal to 10 percent of amount installed for each size indicated,
but no fewer than two units.
1.6 QUALITY ASSURANCE
A. Mockups: Build mockups to verify selections made under Sample submittals, to demonstrate
aesthetic effects, and to set quality standards for materials and execution.
1. Build mockup of typical cubicle as shown on Drawings.
2. Approval of mockups does not constitute approval of deviations from the Contract
Documents contained in mockups unless Architect specifically approves such deviations
in writing.
3. Subject to compliance with requirements, approved mockups may become part of the
completed Work if undisturbed at time of Substantial Completion.
PART 2 - PRODUCTS
2.1 PERFORMANCE REQUIREMENTS
A. Cubicle Curtains: Provide curtain fabrics with the following characteristics:
1. Laundering: Launderable to a water temperature of not less than 160 deg F.
2. Flame Resistance: Provide fabrics identical to those that have passed NFPA 701 when
tested by a qualified testing agency acceptable to authorities having jurisdiction.
a. Identify fabrics with appropriate markings of a qualified testing agency.
2.2 CUBICLE-CURTAIN SUPPORT SYSTEMS
A. Basis-of-Design Product: Subject to compliance with requirements, provide InPro Corporation;
Clickeze System, or comparable product by one of the following, or equal:
1. Imperial Fastener Company, Inc.
2. A. R. Nelson Co.
3. Salsbury Industries.
B. Extruded-Aluminum Curtain Track: Not less than 1-1/4 inches wide by 1-1/8 inch high; with
manufacturer's standard wall thickness.
1. Curved Track: Factory-fabricated, 12-inch-radius bends.
2. Finish: Satin anodized.
Dennis Yarmouth Intermediate Middle School January 19, 2021
Dennis Yarmouth Regional School District 100% Construction Documents
Perkins Eastman DPC, project #71011
CUBICLE CURTAINS AND TRACK
10 2123 - 3
C. Curtain Track Accessories: Fabricate splices, end caps, connectors, end stops, coupling and
joining sleeves, wall flanges, brackets, ceiling clips, and other accessories from same material
and with same finish as track.
1. End Stop: Removable with carrier hook.
D. Curtain Carriers: Two nylon rollers and nylon axle with chrome-plated steel hook.
E. Fasteners: Stainless steel.
2.3 CURTAINS
A. Cubicle Curtain Fabric: Curtain manufacturer's standard, 100 percent polyester; inherently and
permanently flame resistant, stain resistant, and antimicrobial.
1. Pattern and Color: As selected by Architect from manufacturer's full range.
B. Curtain Grommets: Two-piece, rolled-edge, rustproof, nickel-plated brass; spaced not more
than 6 inches o.c.; machined into top hem.
C. Mesh Top: Not less than 20-inch-high mesh top of No. 50 nylon mesh.
2.4 CURTAIN FABRICATION
A. Fabricate curtains as follows:
1. Width: Equal to track length from which curtain is hung plus 10 percent added fullness,
but not less than 12 inches added fullness.
2. Length: Equal to floor-to-ceiling height, minus depth of track and carrier at top, and
minus clearance above the finished floor as follows:
a. Cubicle Curtains: 12 inches.
3. Mesh Top: Top hem of mesh not less than 1 inch and not more than 1-1/2 inches wide,
triple thickness, reinforced with integral web, and double lockstitched. Double lockstitch
bottom of mesh directly to 1/2-inch triple thickness, top hem of curtain fabric.
4. Bottom Hem: Not less than 1 inch and not more than 1-1/2 inches wide, double
thickness and double lockstitched.
5. Side Hems: Not less than 1/2 inch and not more than 1-1/4 inches wide, with double
turned edges, and single lockstitched.
6. Vertical Seams: Not less than 1/2 inch wide, double turned and double stitched.
PART 3 - EXECUTION
3.1 EXAMINATION
A. Examine substrates, areas, and conditions, with Installer present, for compliance with
requirements for installation tolerances and other conditions affecting performance of the Work.
B. Proceed with installation only after unsatisfactory conditions have been corrected.
3.2 INSTALLATION
A. Install tracks level and plumb, according to manufacturer's written instructions.
Dennis Yarmouth Intermediate Middle School January 19, 2021
Dennis Yarmouth Regional School District 100% Construction Documents
Perkins Eastman DPC, project #71011
CUBICLE CURTAINS AND TRACK
10 2123 - 4
B. For tracks of up to 20 feet in length, provide track fabricated from single, continuous length.
1. Curtain-Track Mounting: Surface.
C. Surface-Track Mounting: Fasten tracks to ceilings at intervals recommended by manufacturer.
Fasten tracks to structure at each splice and tangent point of each corner. Center fasteners in
track to ensure unencumbered carrier operation. Attach track to ceiling as follows:
1. Mechanically fasten directly to bottom of concrete deck with post-installed anchors.
2. Mechanically fasten directly to finished ceiling with toggle bolts.
3. Mechanically fasten to furring through suspended ceiling with screw and tube spacer.
4. Mechanically fasten to suspended ceiling grid with screws.
5. Attach track to suspended ceiling grid with manufacturer's proprietary clip.
D. Track Accessories: Install splices, end caps, connectors, end stops, coupling and joining
sleeves, and other accessories as required for a secure and operational installation.
E. Curtain Carriers: Provide curtain carriers adequate for 6-inch spacing along full length of curtain
plus an additional carrier.
F. Cubicle Curtains: Hang curtains on each curtain track.
END OF SECTION