HomeMy WebLinkAbout11-4500-Residential-Appliances_Rev_1Dennis Yarmouth Intermediate Middle School January 19, 2021
Dennis Yarmouth Regional School District 100% Construction Documents
Perkins Eastman DPC, project #71011
11 4500 – RESIDENTIAL APPLIANCES
PAGE 1 of 9
SECTION 11 4500
RESIDENTIAL APPLIANCES
PART 1 - GENERAL
1.01 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
and Division 01 Specification Sections, apply to this Section.
1.02 SUMMARY
A. Section Includes:
1. Cooking appliances and Hoods
2. Refrigeration appliances
3. Clothes washers and dryers
4. Dishwashers
1.03 ACTION SUBMITTALS
A. Product Data: For each type of product.
1. Include installation details, material descriptions, dimensions of individual components, and
finishes for each appliance.
2. Include rated capacities, operating characteristics, electrical characteristics, and furnished
accessories.
B. LEED Submittals:
1. Sustainable Design Intent: Comply with project requirements intended to achieve sustainable
design, measured and documented according to the LEED V4 Green Building Rating System,
of the US Green Building Council. Refer to 018113.23 SUSTAINABLE DESIGN
REQUIREMENTS - LEED FOR SCHOOLS for certification level and certification requirements.
2. Product Data for: For appliances indicated, documentation that products are ENERGY STAR
rated.
C. Product Schedule: For appliances. Use same designations indicated on Drawings.
1.04 INFORMATIONAL SUBMITTALS
A. Qualification Data: For manufacturer.
B. Product Certificates: For each type of appliance.
C. Field quality-control reports.
D. Sample Warranties: For manufacturers' special warranties.
Dennis Yarmouth Intermediate Middle School January 19, 2021
Dennis Yarmouth Regional School District 100% Construction Documents
Perkins Eastman DPC, project #71011
11 4500 – RESIDENTIAL APPLIANCES
PAGE 2 of 9
1.05 CLOSEOUT SUBMITTALS
A. Operation and Maintenance Data: For each residential appliance to include in operation and
maintenance manuals.
1.06 QUALITY ASSURANCE
A. Manufacturer Qualifications: Maintains, within 100 miles of Project site, a service center capable of
providing training, parts, and emergency maintenance repairs.
1.07 WARRANTY
A. Special Warranties: Manufacturer agrees to repair or replace residential appliances or components
that fail in materials or workmanship within specified warranty period.
1. Warranty Period: Five years from date of Substantial Completion.
B. Microwave Oven: Full warranty, including parts and labor, for on-site service on the magnetron tube.
1. Warranty Period: Five years from date of Substantial Completion.
C. Refrigerator/Freezer, Sealed System: Full warranty, including parts and labor, for on-site service on
the product.
1. Warranty Period for Sealed Refrigeration System: Five years from date of Substantial
Completion.
2. Warranty Period for Other Components: Two years from date of Substantial Completion.
PART 2 - PRODUCTS
2.01 MANUFACTURERS
A. Source Limitations: Obtain residential appliances from single source.
2.02 PERFORMANCE REQUIREMENTS
A. Electrical Appliances: Listed and labeled as defined in NFPA 70, by a qualified testing agency, and
marked for intended location and application.
B. Accessibility: Where residential appliances are indicated to comply with accessibility requirements,
comply with applicable provisions in the DOJ's 2010 ADA Standards for Accessible Design and ICC
A117.1.
2.03 GENERAL FINISH REQUIREMENTS
A. Protect mechanical finishes on exposed surfaces from damage by applying a strippable,
temporary protective covering before shipping.
Dennis Yarmouth Intermediate Middle School January 19, 2021
Dennis Yarmouth Regional School District 100% Construction Documents
Perkins Eastman DPC, project #71011
11 4500 – RESIDENTIAL APPLIANCES
PAGE 3 of 9
B. Appearance of Finished Work: Noticeable variations in same piece are not acceptable. Variations in
appearance of adjoining components are acceptable if they are within the range of approved
Samples and are assembled or installed to minimize contrast
2.04 MICROWAVE OVENS
A. Manufacturers: Subject to compliance with requirements, available manufacturers offering products that
may be incorporated into the Work include, but are not limited to, the following:
1. General Electric Company (GE Appliances).
2. KitchenAid; a division of Whirlpool Corporation.
3. LG Electronics.
4. Samsung.
B. Microwave Oven (MW-1): Basis of design, GE Appliances, “PEM31SFSS”
1. Location: Countertop
2. Type: Conventional.
3. Dimensions:
a. Width: 24 inches.
b. Depth: 12-7/8 inches.
c. Height: 12-1/8 inches.
4. Capacity: 1.1 cu. ft.
5. Controls: ADA compliant, front access, electronic touch controls and timer display.
6. Appliance Color/Finish: Stainless steel.
2.05 REFRIGERATOR/FREEZERS
A. Man Manufacturers: Subject to compliance with requirements, available manufacturers offering products
that may be incorporated into the Work include, but are not limited to, the following:
1. General Electric Company (GE Appliances).
2. Summit Appliance.
3. Samsung.
B. Undercounter Refrigerator: Basis of design, Summit Appliance model “AL650LSSHV”
1. Type: Single door with inner door for freezer
2. Dimensions:
a. Width: 23.63 inches
b. Depth: 23.5 inches.
c. Height: 32 inches.
3. Storage Capacity:
a. Total capacity: 5.1 cu ft
Dennis Yarmouth Intermediate Middle School January 19, 2021
Dennis Yarmouth Regional School District 100% Construction Documents
Perkins Eastman DPC, project #71011
11 4500 – RESIDENTIAL APPLIANCES
PAGE 4 of 9
4. Features:
a. ADA Compliant
b. Factory installed lock
c. Dual evaporator system
5. Freezer Features: freezer compartment(s) with door(s).
a. Defrost type: Cycle
6. Appliance Color/Finish: Stainless steel.
C. French Door Refrigerator: Basis of design, GE Appliances model “GYE18JSLSS”
1. Type: French door with bottom freezer and chilled water dispenser.
2. Dimensions:
a. Width: 32-3/4 inches
b. Depth: 31 inches.
c. Height: 69-3/4 inches.
3. Storage Capacity:
a. Total capacity: 17.5 cu ft
4. Features:
a. ADA Compliant
b. Factory installed ice maker
c. Dispenser: Cubes, crushed ice and chilled water.
5. Dispenser Features: LED dispenser light. Water filter indicator light.
6. Energy Performance, ENERGY STAR: Provide appliances that qualify for the EPA/DOE
ENERGY STAR product-labeling program.
7. Appliance Color/Finish: Stainless steel.
2.06 CLOTHES WASHERS AND DRYERS
A. Manufacturers: Subject to compliance with requirements, available manufacturers offering products
that may be incorporated into the Work include, but are not limited to, the following:
1. Bosch – BSH Home Appliances Corporation
2. General Electric Company (GE Appliances).
3. LG Electronics.
4. Maytag; a division of Whirlpool Corporation.
5. Whirlpool
B. Clothes Washer: Basis of design, GE Appliances model “GFW550SPNDG”
1. Type: Freestanding, front-loading unit
2. Drum: Stainless steel- Tilted
3. Capacity: 4.8 Cu. Ft.
4. Dimensions:
Dennis Yarmouth Intermediate Middle School January 19, 2021
Dennis Yarmouth Regional School District 100% Construction Documents
Perkins Eastman DPC, project #71011
11 4500 – RESIDENTIAL APPLIANCES
PAGE 5 of 9
a. Width: 28 inches
b. Depth: 32 inches
c. Height: 39-3/4” inches
5. Controls: Add Garment/Pause, Adjustable End-of-Cycle Signal, Control Lock, Delay Wash - Up
to 24 hours, Digital Cycle Countdown, LED Display, LED Indicators, My Settings, Remote Start
6. Motor: Manufacturer's standard with built-in overload protector.
7. Wash Cycles: Bulky/Bedding, Cold Wash, Delicates, Normal, Quick Wash, Rinse + Spin,
Sanitize with Oxi, Self Clean ,Towels ,Whites
8. Features:
a. ADA compliant.
b. Reversible door, side swing
9. Energy Performance, ENERGY STAR: Provide appliances that qualify for the
EPA/DOE ENERGY STAR product-labeling program.
10. Appliance Finish: Diamond Gray
C. Clothes Dryer: Basis of design, GE Appliances model “GFD55ESPNDG”
1. Type: Front Load, Electric Dryer
2. Drum: Alcosta Aluminized Drum
3. Capacity: 7.8 Cu. Ft.
4. Dimensions:
a. Width: 28 inches
b. Depth: 32 inches
c. Height: 9-3/4 inches
5. Controls: Electronic touch controls and rotary-dial controls, Adjustable End-of-Cycle Signal
Control Lock, Delay Dry - Up to 24 hours, Digital Cycle Countdown, LED Display, LED
Indicators, My Settings, Remote Start, Damp Alert, Front Serviceable, LED Interior Light,
Removable Up-Front Lint Filter, Vent Sensing, ecoDry
6. Dryer Cycles: Bulky / Bedding, Cottons, Delicates, Dewrinkle, Mixed Loads, Perm Press, Quick
Dry, Sanitize, Timed Dry, Towels
7. Features: a. ADA compliant
b. Reversible door, side swing
8. Ducting:
a. 4-Way (Rear; Right; Left & Bottom)
b. Up to 90 feet
c. Vented with 4" diameter all rigid metal exhaust duct
d. Must be exhausted to the outside
9. Energy Performance, ENERGY STAR: Provide appliances that qualify for the
EPA/DOE ENERGY STAR product-labeling program.
Dennis Yarmouth Intermediate Middle School January 19, 2021
Dennis Yarmouth Regional School District 100% Construction Documents
Perkins Eastman DPC, project #71011
11 4500 – RESIDENTIAL APPLIANCES
PAGE 6 of 9
10. Appliance Finish: Diamond Gray
2.07 COOKTOPS
A. Manufacturers: Subject to compliance with requirements, available manufacturers offering products
that may be incorporated into the Work include, but are not limited to, the following:
1. General Electric Company (GE Appliances)
2. Kitchenaid: a division of Whirlpool Corporation
3. Summit Appliance
4. Bosch Appliances
5. Samsung Appliances
B. Cooktop: Basis of design, General Electric, “PP7030SJSS”
1. Type: Five radiant smooth top
2. Dimensions:
a. Width: 29-7/8 inches
b. Depth: 21 inches
c. Height: 3-1/4 inches
3. Cook burner type: Five elements, (2) 7” elements and (1) 8”/5” dual elements, (1) 6” element
and (1) 9”/6” Power Boil element
4. Cooktop surface: Black ceramic glass
5. Controls: Knob
6. Features:
a. ADA Compliant
b. Cooktop “ON” indicator light
c. Keep warm setting
d. Melt setting
e. Control lock capability
f. Hot surface indicator lights
7. Appliance Color/Finish: Stainless Steel on Black
C. Convection Oven (WO-1A hinge on right and WO-1B hinge on left): Basis of design, Bosch “HBLP451LUC” Left Side Opening “HBLP451RUC” Right Side Opening
1. Type: Built-in touch control
2. Dimensions:
a. Width: 29-3/4 inches
b. Depth: 24-1/2 inches.
c. Height: 29 inches
3. Oven cavity: 4.6 cu. ft.
4. Control location: Front LCD touch controls
Dennis Yarmouth Intermediate Middle School January 19, 2021
Dennis Yarmouth Regional School District 100% Construction Documents
Perkins Eastman DPC, project #71011
11 4500 – RESIDENTIAL APPLIANCES
PAGE 7 of 9
5. Cooking technology: Convection
6. Oven cleaning type: Self-clean
7. Features:
a. ADA Compliant
b. Side opening door
c. Child safety lock
8. Appliance Color/Finish: Stainless steel.
2.08 EXHAUST HOODS
A. Manufacturers: Subject to compliance with requirements, available manufacturers offering products that
may be incorporated into the Work include, but are not limited to, the following:
1. Air King Ventilation Products
2. Broan-NuTone, LLC
3. KitchenAid: A division of Whirlpool Corporation
B. Exhaust Hood: Basis of design: Air King Ventilation Products, “ES308ADA”
1. Dimensions:
a. Width: 30 inches
b. Depth: 19-1/2 inches
c. Height: 7-1/2 inches
2. Motor/Blade: Fully enclosed PSC 4 pole motor. 2 speed, thermally protected, permanently
lubricated motor. Rated 120 volts, 60 hz. with two electronically balanced blower wheels.
3. Controls: Wall mounted dual rocker switch with plate, white finish.
4. Lighting: Include 8 Watt LED lamp and 4 Watt night light with bulb.
5. Ducting type: Vertical or horizontal 3.25" x 10" ducting with collar and damper.
6. Feature: ADA Compliant.
7. Energy Performance: Provide appliances that qualify for the EPA/DOE ENERGY STAR
product-labeling program.
8. Appliance Finish: Stainless Steel.
9. Features:
a. ADA Compliant
b. Energy Star
c. Aluminum Grease Filter: GF-01
Dennis Yarmouth Intermediate Middle School January 19, 2021
Dennis Yarmouth Regional School District 100% Construction Documents
Perkins Eastman DPC, project #71011
11 4500 – RESIDENTIAL APPLIANCES
PAGE 8 of 9
2.09 DISHWASHERS
C. Manufacturers: Subject to compliance with requirements, available manufacturers offering products
that may be incorporated into the Work include, but are not limited to, the following:
1. Electrolux Home Products (Frigidaire).
2. General Electric Company (GE Appliances).
3. KitchenAid; a division of Whirlpool Corporation.
4. LG Electronics.
5. Whirlpool Corporation.
D. Dishwasher: Basis of design, GE Appliance model “GDT225SSLSS”
1. Type: Built-in undercounter.
2. Dimensions:
a. Width: 24 inches
b. Depth: 24 inches.
c. Height: 32-11/32 inches.
3. Sound Level: Maximum 57 dBA
4. Quiet Features: Door insulation, quiet power motor, tub collar trim and tub insulation.
5. Tub and Door Liner: Stainless Steel
6. Rack System: 1 piece molded silverware basket with 1 cell cover, 2 plastic utility shelves with
stem safe ball tipped tines.
7. Controls: 3 touchpads, fully integrated electronic top controls
8. Features:
a. ADA Compliant.
b. 1 “Stanitized” Light Cycle Progress, 1 “Clean” indicators.
c. 5-Level, Towerless wash system
d. 2-Stage self-cleaning filtration with extra fine filter.
e. Delay-wash option.
9. Energy Performance, ENERGY STAR: Provide appliances that qualify for the EPA/DOE
ENERGY STAR product-labeling program.
10. Appliance Color/Finish: Stainless steel.
PART 3 - EXECUTION
3.01 EXAMINATION
A. Examine substrates, areas, and conditions, with Installer present, for compliance with
requirements for installation tolerances, power connections, and other conditions affecting
installation and performance of residential appliances.
B. Prepare written report, endorsed by Installer, listing conditions detrimental to performance of
Dennis Yarmouth Intermediate Middle School January 19, 2021
Dennis Yarmouth Regional School District 100% Construction Documents
Perkins Eastman DPC, project #71011
11 4500 – RESIDENTIAL APPLIANCES
PAGE 9 of 9
the Work.
C. Proceed with installation only after unsatisfactory conditions have been corrected.
3.02 INSTALLATION
A. Install appliances according to manufacturer's written instructions.
B. Built-in Equipment: Securely anchor units to supporting cabinets or countertops with concealed
fasteners. Verify that clearances are adequate for proper functioning and that rough openings
are completely concealed.
C. Freestanding Equipment: Place units in final locations after finishes have been completed in
each area. Verify that clearances are adequate to properly operate equipment.
3.03 FIELD QUALITY CONTROL
A. An appliance will be considered defective if it does not pass tests and inspections.
B. Prepare test and inspection reports.
3.04 DEMONSTRATION
A. Engage a factory-authorized service representative to train Owner's maintenance personnel to
adjust, operate, and maintain residential appliances.
END OF SECTION
114500
(THIS PAGE IS BLANK)