HomeMy WebLinkAbout105 Sisters Cir plan 10IQ8 and IQ8+ Microinverters
Our newest I08 Microinverters are the industry's first microgrid-forming, software -
defined microinverters with split -phase power conversion capability to convert DC
power to AC power efficiently. The brain of the semlconductor-based microinverter
is our proprietary application-speclfic integrated circuit (ASIC) which enables the
microinverter to operate in grid -tied or off -grid modes. This chip Is built in advanced
55nm technology with high speed digital logic and has super -fast response times
to changing loads and grid events, alleviating constraints on battery sizing for home
energy systems.
01010-
Part of the Enphase Energy System, I08 Series
Microinverters integrate with the Enphase IQ
Battery, Enphase IQ Gateway, ant the Enphass
App monitoring and analysis software.
Connect PV modules quickly and easily to
108 Series Microinverters using the included
Q-0CC-2 adapter cable with plug-n-play MC4
connectors.
I08 Series Microinverters redefine reliability
standards with more than one million
cumulative hours of power -on testing,
enabling an industry -leading limited warranty
of up to 25 years.
I08 Series Microinverters are UL Listed as
PV Rapid Shut Down Equipment and conform
with various regulations, when installed
according to manufacturer's Instructions.
0 2021 Enphase Energy. All rights reserved. Enphase, the Enphase logo, toe microinverters,
and other names are trademarks of Enphase Energy, Inc. Data subject to change.
108SP-DS-0002-01-EN-US-2021-10-19
Easy to install
• Lightweight and compact with
plug-n-play connectors
• Power Line Communication
(PLC) between components
Faster Installation with simple
two -wire cabling
High productivity and reliability
Produce power even when the
grid Is down
More than one mlliion cumulative
hours of testing
• Class II double -insulated
enclosure
• Optimized for the latest high-
powered PV modules
Microgrid-forming
Complies with the latest
advanced grid support
• Remote automatic updates for
the latest grid requirements
• Configurable to support a wide
range of grid profiles
Meets CA Rule 21(UL 1741-SA)
requirements
IQ8 and IQ8+ Microinverters
Commonly used module pairings'
w
.,
235 - 350 235 - "0
Module compatibility
60-cell/120 half -toll 60-oell/120 half -cell and 72-tail/144 half -cell
MPPT voltage range
V
27-37 29-45
Operating range
V
25 - 48 25 - 58
Min/max start voltage
V
30 / 48 30 / 58
Max input DC voltage
v
50 80
Max DC currerri` [module lac]
A
15
Overvoltage class DC port
11
DC port baokfeed current
MA
0
PV array configuration
1x1 Ungrounded array; No additional DC side protection required; AC side protection requires max 20A per branch cirouf
Peakoutputpower
VA
245 300
Max continuous output power
VA
240 290
Nominal (L-L) votags/range'
V
240 / 211- 254
Max continuous output current
A
1.0 1.21
Nominal frequency
Hz
80
Extended frequency range
Hr
50 - 68
Max units per 20 A (L-L) branch anwit"
18 13
Total harmonic distortion
<5%
Overvoltage class AC part
III
AC port backfeed current
mA
30
Power factor setting
1.0
Grid -tied power factor (adjustable)
0.85leading - 0.85lagging
Peak efficiency
1i
975 97.0
DEC weighted efficiency
Y,
97 97
Night-time power consumption
mw
80
Ambient temperature range
-40-C to+60°C (40"F to +140°F)
Relative humidity range
4%to 100% (condensing)
OC Connector type
MC4
Dimensions (HxWXD)
212 mm (8.3") x 175 mm (8.9") 00.2 mm (1a")
Weight
1.08 kg (2.381bs)
Cooling
Natural convection -no fans
Approved for wet locations
Yes.
Acoustic noise at 1 m
<60 daA
Pollution degree
PDa
Enclosure
Class 11 double -insulated, corrosion resistant polymeric enclosure
Environ. category / UV exposure rating
NEMA Type 6 / outdoor
CA Rule 21(UL 1741-SA), UL 62109-1, UL1741/IEEE1547, FCC Part 1.5 Class B, ICES-0003 Class a, CAN/CSJ1-C22.2 NO. tOZt-i
Certifications
This product is UL Listed as PV Rapid Shut Down Equipment and conforms with NEC 2014, NEC 2017, and NEC 2020 section
690.12 and C22.1-2018 Rule 54-218 Rapid Shutdown of PV Systems, for AG and DC conductors, when installed according tc
manufacturer's instructions.
(1) No enforced DC/AC ratio. See the compatibility calculator at https://IiriLonphase coml
module -compatibility (2) Maximum continuous input DC current is 10.8A (3) Nominal voltage
range can be extended beyond nominal if required by the utility. (4) Limits may vary. Refer to
local requirements to define the number of microinverters per branch in your area. IQBSP-DS-0002-01-EN-US-2021